尚硅谷嵌入式全套技术课程
嵌入式技术全栈学习
编辑点评
系统覆盖Linux、STM32单片机等嵌入式技术，适合初学者构建嵌入式全栈知识体系。
⭐ 编辑推荐
尚硅谷嵌入式全套技术课程，从Linux基础到STM32单片机进阶，助你全面掌握嵌入式技术。
课程亮点
• Linux基础与进阶
• STM32单片机应用
• 全栈嵌入式技术学习
课程目录
📁 16_嵌入式技术之Linux
📁 2.资料
2.资料资料.png [493.5 KB]
VMware 17的许可密钥.txt [29.0 B]
VMware-workstation-full-17.5.1-23298084.exe [594.3 MB]
Xshell-8.0.0057p.exe [49.9 MB]
Xftp-8.0.0057p.exe [41.3 MB]
📁 4.视频
📁 day02
16_尚硅谷_Linux（Shell 流程控制 case）.mp4 [14.0 MB]
04_尚硅谷_Linux（搜索查找类 find grep）.mp4 [43.2 MB]
14_尚硅谷_Linux（Shell 条件判断）.mp4 [41.3 MB]
07_尚硅谷_Linux（进程线程磁盘）.mp4 [131.7 MB]
08_尚硅谷_Linux（路径类）.mp4 [10.8 MB]
19_尚硅谷_Linux（Shell 从控制台单独读取参数 read）.mp4 [17.3 MB]
15_尚硅谷_Linux（Shell 流程控制 if）.mp4 [23.0 MB]
18_尚硅谷_Linux（Shell 流程控制 while）.mp4 [9.2 MB]
17_尚硅谷_Linux（Shell 流程控制 for）.mp4 [28.0 MB]
21_尚硅谷_Linux（Shell 工具 cut）.mp4 [23.4 MB]
10_尚硅谷_Linux（Shell 变量 系统&自定义变量）.mp4 [44.3 MB]
20_尚硅谷_Linux（Shell 函数）.mp4 [27.1 MB]
02_尚硅谷_Linux（文件权限类 chmod）.mp4 [35.7 MB]
03_尚硅谷_Linux（文件权限类 chown chgrp）.mp4 [52.0 MB]
09_尚硅谷_Linux（Shell 脚本入门）.mp4 [78.1 MB]
01_尚硅谷_Linux（文件权限类 说明）.mp4 [107.7 MB]
12_尚硅谷_Linux（Shell 变量 单双引号区别）.mp4 [22.2 MB]
11_尚硅谷_Linux（Shell 变量 特殊变量）.mp4 [45.7 MB]
13_尚硅谷_Linux（Shell 算数运算符）.mp4 [7.1 MB]
05_尚硅谷_Linux（压缩与解压）.mp4 [40.3 MB]
06_尚硅谷_Linux（压缩与解压 补充说明）.mp4 [19.1 MB]
22_尚硅谷_Linux（Shell 工具 awk）.mp4 [72.7 MB]
📁 day01
10_尚硅谷_Linux（常用快捷键）.mp4 [23.8 MB]
02_尚硅谷_Linux（WMware软件安装）.mp4 [40.1 MB]
08_尚硅谷_Linux（目录结构）.mp4 [44.8 MB]
03_尚硅谷_Linux（创建虚拟机）.mp4 [47.1 MB]
14_尚硅谷_Linux（mkdir touch）.mp4 [23.8 MB]
06_尚硅谷_Linux（安装远程连接工具 XShell）.mp4 [45.4 MB]
12_尚硅谷_Linux（配置主机名本地映射）.mp4 [15.7 MB]
07_尚硅谷_Linux（安装远程传输工具 Xftp）.mp4 [19.9 MB]
05_尚硅谷_Linux（网络配置 固定IP地址）.mp4 [24.7 MB]
15_尚硅谷_Linux（cp rm mv）.mp4 [51.6 MB]
17_尚硅谷_Linux（ln history）.mp4 [72.5 MB]
01_尚硅谷_Linux（基础介绍）.mp4 [79.3 MB]
13_尚硅谷_Linux（pwd ls cd）.mp4 [61.7 MB]
11_尚硅谷_Linux（手册&帮助命令）.mp4 [30.4 MB]
09_尚硅谷_Linux（apt软件包管理工具）.mp4 [11.5 MB]
04_尚硅谷_Linux（安装Linux系统）.mp4 [49.6 MB]
18_尚硅谷_Linux（vim编辑器 常用操作命令&进入编辑模式）.mp4 [53.8 MB]
16_尚硅谷_Linux（cat tail echo 重定向）.mp4 [77.9 MB]
课堂笔记.txt [564.0 B]
📁 1.笔记
尚硅谷嵌入式技术之Linux（Ubuntu）2.0.0.docx [11.5 MB]
尚硅谷嵌入式技术之Shell.2.0.0.docx [449.6 KB]
📁 09_嵌入式技术之STM32单片机进阶
📁 2.视频
📁 Day03
08_定时器输入捕获总结.mp4 [74.4 MB]
03_实现捕获测量逻辑.mp4 [42.6 MB]
09_定时器测量占空比使用从模式原理.mp4 [68.2 MB]
06_HAL库实现输入捕获.mp4 [151.9 MB]
01_每日一考.mp4 [25.3 MB]
11_定时器测量占空比.mp4 [53.6 MB]
04_最终展示输入捕获测量结果.mp4 [39.2 MB]
02_输入捕获定时器基本参数配置.mp4 [211.9 MB]
05_输入捕获统计周期频率的总结.mp4 [33.2 MB]
10_定时器从模式的使用.mp4 [42.2 MB]
07_定时器基础单元和输出模块总结.mp4 [104.5 MB]
12_定时器测量占空比案例总结.mp4 [35.3 MB]
📁 Day07
09_hal库实现flash读写 代码移植.mp4 [114.9 MB]
04_W25Q32的擦除和读取数据.mp4 [76.3 MB]
01_每日一考.mp4 [46.3 MB]
05_W25Q32读写演示.mp4 [25.2 MB]
06_W25Q32实现读写总结.mp4 [36.5 MB]
07_SPI外设介绍.mp4 [30.2 MB]
10_常用存储器介绍.mp4 [52.2 MB]
02_W25Q32读取忙状态开启写使能.mp4 [102.5 MB]
03_W25Q32写入数据.mp4 [62.2 MB]
08_SPI外设实现flash读写.mp4 [202.6 MB]
11_存储器和寄存器介绍.mp4 [121.0 MB]
📁 Day09
07_LCD的FSMC初始化.mp4 [115.2 MB]
04_LCD显示原理介绍.mp4 [132.3 MB]
05_LCD硬件接线介绍.mp4 [41.0 MB]
11_画一个点展示.mp4 [83.9 MB]
13_画一个圆和实心圆展示.mp4 [290.5 MB]
09_LCD的命令交互.mp4 [58.0 MB]
08_LCD的背光初始化.mp4 [178.8 MB]
12_画一条线.mp4 [141.4 MB]
01_每日一考.mp4 [11.4 MB]
03_LCD液晶屏幕介绍.mp4 [56.8 MB]
06_LCD地址对应介绍.mp4 [21.6 MB]
02_FSMC数据宽度.mp4 [61.6 MB]
10_整个LCD屏幕展示.mp4 [426.0 MB]
📁 Day06
08_W25Q32介绍.mp4 [53.3 MB]
05_多通道采集寄存器方式总结.mp4 [30.1 MB]
09_W25Q32存储空间和读写注意.mp4 [74.1 MB]
12_SPI测试驱动演示.mp4 [51.7 MB]
06_hal库实现多通道采集.mp4 [104.7 MB]
07_SPI通信简介.mp4 [70.6 MB]
02_使用hal库完成单通道ADC测量.mp4 [50.7 MB]
13_SPI_软件驱动编写总结.mp4 [29.4 MB]
03_多通道采集ADC初始化.mp4 [199.2 MB]
11_SPI软件模拟实现字节读写.mp4 [31.5 MB]
10_SPI软件模拟的初始化.mp4 [69.1 MB]
04_多通道采集实现.mp4 [251.6 MB]
01_每日一考.mp4 [17.2 MB]
📁 Day05
03_DMA完成批量接受数据打印.mp4 [49.3 MB]
12_ADC转换测量电压案例演示.mp4 [137.3 MB]
13_ADC转换的外部软件触发.mp4 [24.6 MB]
02_DMA接收数据到内存代码测试.mp4 [109.9 MB]
01_每日一考.mp4 [18.5 MB]
10_ADC配置序列通道寄存器.mp4 [46.6 MB]
05_DMA的hal实现.mp4 [82.8 MB]
14_ADC转换的总结.mp4 [21.2 MB]
09_ADC核心寄存器介绍.mp4 [109.4 MB]
08_ADC外设介绍.mp4 [225.8 MB]
07_逐次逼近型ADC测量原理.mp4 [38.0 MB]
06_ADC介绍.mp4 [117.1 MB]
04_DMA完成接收数据总结.mp4 [19.8 MB]
11_ADC初始化配置.mp4 [90.3 MB]
📁 Day08
06_FSMC的寄存器模式介绍.mp4 [27.3 MB]
01_每日一考.mp4 [25.7 MB]
11_FSMC动态扩展的HAL实现.mp4 [112.8 MB]
10_堆栈常量的存储位置.mp4 [39.3 MB]
07_AFIO功能介绍.mp4 [23.6 MB]
08_FSMC初始化完成.mp4 [143.6 MB]
09_FSMC扩展内存的使用方式.mp4 [69.1 MB]
05_FSMC引脚初始化配置.mp4 [93.4 MB]
02_FSMC简介.mp4 [52.7 MB]
12_FSMC总结.mp4 [32.6 MB]
04_FSMC外接芯片介绍.mp4 [98.1 MB]
03_FSMC结构介绍.mp4 [103.2 MB]
📁 Day01
08_基本定时器原理介绍.mp4 [91.5 MB]
09_基本定时器寄存器介绍.mp4 [55.8 MB]
03_系统滴答定时器寄存器介绍.mp4 [64.7 MB]
11_寄存器实现基本定时器案例.mp4 [74.7 MB]
12_hal库实现基本定时器.mp4 [84.3 MB]
10_初始化TIM6时钟.mp4 [51.8 MB]
04_寄存器实现系统滴答定时器案例.mp4 [162.4 MB]
06_系统滴答定时器和延时函数.mp4 [34.6 MB]
07_hal实现系统滴答定时器总结.mp4 [27.4 MB]
01_进阶文档介绍.mp4 [113.6 MB]
02_系统滴答定时器简介.mp4 [32.9 MB]
05_使用hal库实现系统滴答定时器.mp4 [91.9 MB]
📁 Day02
04_定时器输出比较介绍.mp4 [43.4 MB]
01_每日一考.mp4 [40.2 MB]
12_输入捕获的原理介绍.mp4 [54.9 MB]
09_寄存器实现呼吸灯总结.mp4 [13.8 MB]
07_软件逻辑实现呼吸灯.mp4 [138.9 MB]
05_通用定时器的寄存器介绍.mp4 [100.0 MB]
03_PWM方波介绍.mp4 [41.1 MB]
06_通用定时器调整占空比修改led亮度.mp4 [194.0 MB]
02_通用定时器简介.mp4 [115.3 MB]
10_使用hal库实现呼吸灯.mp4 [86.8 MB]
08_第二种方法实现呼吸灯逻辑.mp4 [36.0 MB]
11_使用输入捕获功能测量PWM周期的原理.mp4 [73.4 MB]
📁 Day10
02_使用LCD展示一个字符.mp4 [174.5 MB]
08_LCD展示图片的原理.mp4 [44.2 MB]
07_LCD展示汉字.mp4 [109.3 MB]
03_使用LCD展示所有的ASCII字符.mp4 [158.5 MB]
04_LCD展示32高度的字符.mp4 [128.7 MB]
05_LCD展示24高度的字符.mp4 [63.4 MB]
01_每日一考.mp4 [10.8 MB]
06_LCD展示字符串.mp4 [169.0 MB]
📁 Day04
10_DMA的hal实现.mp4 [29.2 MB]
07_DMA功能介绍.mp4 [71.4 MB]
08_DMA寄存器介绍.mp4 [83.8 MB]
11_DMA传输总结.mp4 [43.4 MB]
01_每日一考.mp4 [18.5 MB]
03_高级定时器生成固定个PWM方波介绍.mp4 [127.3 MB]
09_DMA传输存储器数据到外设实现.mp4 [138.5 MB]
04_高级定时器控制PWM输出案例.mp4 [330.1 MB]
05_寄存器实现PWM输出案例总结.mp4 [18.5 MB]
06_hal库实现高级定时器.mp4 [174.1 MB]
02_hal库实现测量占空比.mp4 [103.5 MB]
📁 3.课堂笔记
P15_TIM6_register.md [1.3 KB]
P25_DMA1_register.md [1.6 KB]
P21_TIM4_dutyCycle_register.md [2.0 KB]
P13_systick_register.md [894.0 B]
P14_systick_hal.md [999.0 B]
P19_TIM4_register.md [2.7 KB]
P23_TIM1_register.md [2.0 KB]
P17_TIM5_register.md [1003.0 B]
📁 4.资料
📁 笑脸画图
📁 Balsamiq_Mockups_3
📁 skins
sketch.swf [144.9 KB]
wireframe.swf [92.6 KB]
📁 META-INF
📁 AIR
hash [32.0 B]
application.xml [6.1 KB]
signatures.xml [362.2 KB]
📁 icons
mockups_doc_ico_29.png [1.5 KB]
mockups_doc_ico_128.png [8.7 KB]
mockups_doc_ico_16.png [697.0 B]
mockups_ico_16.png [723.0 B]
mockups_ico_128.png [5.8 KB]
mockups_ico_32.png [1.5 KB]
mockups_ico_48.png [2.2 KB]
mockups_ico_29.png [1.3 KB]
mockups_doc_ico_48.png [2.7 KB]
mockups_ico_512.png [29.1 KB]
mockups_doc_ico_36.png [1.9 KB]
mockups_ico_36.png [1.6 KB]
mockups_doc_ico_32.png [1.7 KB]
mockups_doc_ico_512.png [57.6 KB]
📁 Adobe AIR
📁 Versions
📁 1.0
📁 Resources
📁 WebKit
LGPL License.txt [24.2 KB]
Notice WebKit.txt [771.0 B]
NPSWF32.dll [15.5 MB]
CaptiveAppEntry.exe [58.0 KB]
AdobeCP15.dll [3.3 MB]
Adobe AIR.vch [1.8 MB]
WebKit.dll [4.6 MB]
Adobe AIR.dll [20.0 MB]
textLayout_2.0.0.232.swf [305.4 KB]
Balsamiq Mockups 3.exe [225.1 KB]
mimetype [59.0 B]
framework_4.6.0.23201.swf [530.2 KB]
balsamiq_mockups_3.4.2.swf [2.3 MB]
注册码.txt [52.0 B]
📁 每日一考
06_SPI.txt [915.0 B]
1.代码.zip [112.2 MB]
定时器总结.bmpr [68.0 KB]
📁 14_嵌入式技术之四轴无人机
📁 01_笔记
01_尚硅谷嵌入式技术之四轴无人机_飞控板1.1.0.docx [20.7 MB]
四轴飞行器.xmind [2.0 MB]
飞机3D模型.pptx [13.2 MB]
02_尚硅谷嵌入式技术之四轴无人机_遥控器1.1.0.docx [956.5 KB]
📁 05_视频_四轴无人机
📁 day_02
09-无人机-飞控项目-通信任务-SI24R1-驱动移植-中.mp4 [41.4 MB]
14-无人机-飞控项目-通信任务-SI24R1-接收数据测试程序.mp4 [36.0 MB]
02-无人机-飞控项目-通信任务-SI24R1-芯片结构.mp4 [21.0 MB]
12-无人机-飞控项目-通信任务-SI24R1-驱动说明-下.mp4 [77.3 MB]
05-无人机-飞控项目-通信任务-SI24R1-ACK通信流程.mp4 [56.9 MB]
配置.txt [37.0 B]
01-无人机-飞控项目-通信任务-SI24R1-简介.mp4 [109.2 MB]
15-无人机-遥控项目-通信任务&电源任务-移植和测试.mp4 [141.1 MB]
08-无人机-飞控项目-通信任务-SI24R1-驱动移植-上.mp4 [97.6 MB]
00-FreeRTOS-中断处理脚本使用说明.mp4 [41.5 MB]
11-无人机-飞控项目-通信任务-SI24R1-驱动说明-上.mp4 [90.1 MB]
07-无人机-飞控项目-通信任务-SI24R1-SPI接口&寄存器说明.mp4 [40.5 MB]
10-无人机-飞控项目-通信任务-SI24R1-驱动移植-下.mp4 [104.2 MB]
06-无人机-飞控项目-通信任务-SI24R1-多通道通信.mp4 [8.2 MB]
03-无人机-飞控项目-通信任务-SI24R1-工作模式.mp4 [42.0 MB]
04-无人机-飞控项目-通信任务-SI24R1-通讯协议.mp4 [62.4 MB]
InterruptHandler.ps1 [1.2 KB]
13-无人机-飞控项目-通信任务-SI24R1-初始化函数.mp4 [41.5 MB]
16-无人机-遥控项目-电源任务-问题说明.mp4 [29.4 MB]
📁 day_07
07-无人机-定高-VL53L1X-高度PID计算逻辑-上.mp4 [69.6 MB]
11-无人机项目梳理.mp4 [45.5 MB]
02-无人机-定高-芯片介绍.mp4 [31.0 MB]
03-无人机-定高-VL53L1X-外设配置.mp4 [35.0 MB]
06-无人机-定高-VL53L1X-驱动编写.mp4 [215.3 MB]
08-无人机-定高-VL53L1X-高度PID计算逻辑-下.mp4 [89.7 MB]
10-FreeROTS回顾.mp4 [117.1 MB]
01-无人机-定高-思路分析.mp4 [202.2 MB]
04-无人机-定高-VL53L1X-驱动适配.mp4 [91.4 MB]
05-无人机-定高-VL53L1X-驱动说明.mp4 [87.7 MB]
09-无人机-定高-VL53L1X-记录当前高度.mp4 [80.1 MB]
📁 day_03
02-无人机-遥控项目-遥控数据处理-按键扫描.mp4 [138.7 MB]
04-无人机-遥控项目-遥控数据处理-摇杆扫描-编码.mp4 [34.5 MB]
06-无人机-遥控项目-遥控数据处理-摇杆扫描-Vofa工具说明.mp4 [102.7 MB]
08-无人机-遥控项目-遥控数据处理-摇杆扫描-偏移问题说明.mp4 [51.4 MB]
05-无人机-遥控项目-遥控数据处理-摇杆扫描-测试.mp4 [168.7 MB]
01-无人机-遥控项目-遥控数据处理-思路分析.mp4 [15.7 MB]
03-无人机-遥控项目-遥控数据处理-摇杆扫描-ADC配置.mp4 [100.0 MB]
10-无人机-遥控项目-遥控数据处理-按键数据处理.mp4 [95.5 MB]
13-无人机-遥控项目-通讯任务-关机和定高信号处理.mp4 [38.8 MB]
15-无人机-无线通讯-不稳定问题说明.mp4 [96.3 MB]
12-无人机-飞控项目-通讯任务-接收数据.mp4 [135.3 MB]
09-无人机-遥控项目-遥控数据处理-摇杆扫描-偏移问题解决.mp4 [216.8 MB]
📁 day_01
15-无人机-飞控项目-灯控任务-GPIO配置.mp4 [83.5 MB]
06-无人机-飞控项目-创建.mp4 [37.9 MB]
16-无人机-飞控项目-灯控任务-编码-上.mp4 [20.6 MB]
14-无人机-飞控项目-电源任务-编码.mp4 [69.2 MB]
19-无人机-飞控项目-飞控任务-电机转速控制.mp4 [85.2 MB]
08-无人机-飞控项目-初始化配置-集成FreeRTOS.mp4 [71.0 MB]
13-无人机-飞控项目-电源任务-GPIO配置&框架搭建.mp4 [35.7 MB]
09-无人机-飞控项目-初始化配置-测试.mp4 [21.6 MB]
07-无人机-飞控项目-初始化配置-重定向printf.mp4 [8.4 MB]
14.5-无人机-飞控项目-电源任务-纠错.mp4 [54.4 MB]
18-无人机-飞控项目-飞控任务-定时器配置.mp4 [106.9 MB]
11-无人机-遥控项目-创建.mp4 [2.8 MB]
01-无人机-组成结构-上.mp4 [94.2 MB]
04-无人机-实现思路.mp4 [18.4 MB]
05-无人机-项目结构.mp4 [60.8 MB]
📁 day_04
12-四轴飞行器-飞控端-飞控任务-根据状态设置电机转速-上.mp4 [79.6 MB]
16-四轴飞行器-遥控端-显示任务-驱动移植.mp4 [149.0 MB]
04-四轴飞行器-飞控端-通讯任务-处理关机信号.mp4 [143.2 MB]
03-四轴飞行器-飞控端-通讯任务-处理遥控连接状态.mp4 [264.2 MB]
代码补充.txt [179.0 B]
02-四轴飞行器-飞控端-通讯任务-无线通讯不稳定问题说明.mp4 [88.0 MB]
13-四轴飞行器-飞控端-飞控任务-根据状态设置电机转速-下.mp4 [74.6 MB]
08-四轴飞行器-遥控端-通讯任务-发送数据-关机&定高安全问题.mp4 [28.4 MB]
07-四轴飞行器-飞控端-通讯任务-处理飞行状态-油门解锁状态机-思路分析.mp4 [29.3 MB]
15-四轴飞行器-遥控端-显示任务-驱动说明.mp4 [120.4 MB]
14-四轴飞行器-遥控端-显示任务-通信协议说明.mp4 [123.7 MB]
11-四轴飞行器-飞控端-飞控任务-整体思路.mp4 [15.3 MB]
10-四轴飞行器-飞控端-通讯任务-处理飞行状态-油门解锁状态机编程.mp4 [216.3 MB]
05-四轴飞行器-飞控端-通讯任务-处理飞行状态-状态机说明.mp4 [22.5 MB]
油门解锁状态机.png [47.0 KB]
09-四轴飞行器-油门别给太大.mp4 [45.1 MB]
飞行状态机.png [20.5 KB]
📁 day_06
07-无人机-飞控任务-PID-串级PID代码编写.mp4 [60.9 MB]
13-无人机-飞控任务-PID调参-俯仰角-外环-P-确定极性.mp4 [49.7 MB]
姿态PID参数.txt [445.0 B]
04-无人机-飞控任务-姿态PID-姿态解算概述.mp4 [175.9 MB]
12-无人机-飞控任务-PID调参-俯仰角-内环-P-确定大小.mp4 [118.9 MB]
01-无人机-飞控任务-姿态控制-思路分析.mp4 [14.9 MB]
15-无人机-飞控任务-PID调参-俯仰角-外环P增大&内环D调整.mp4 [142.8 MB]
08-无人机-飞控任务-PID-计算结果作用到电机转速-思路分析.mp4 [285.1 MB]
无人机.drawio [2.2 MB]
05-无人机-飞控任务-四元数解算移植.mp4 [150.4 MB]
10-无人机-飞控任务-姿态控制-思路梳理.mp4 [11.2 MB]
14-无人机-飞控任务-PID调参-俯仰角-外环-P-确定大小.mp4 [118.9 MB]
03-无人机-飞控任务-姿态PID-控制思路.mp4 [36.9 MB]
02-无人机-代码调整（低通滤波static&通讯任务&飞控任务周期）.mp4 [23.5 MB]
16-无人机-飞控任务-PID调参-俯仰角-内环D调小.mp4 [1.5 MB]
11-无人机-飞控任务-PID调参-俯仰角-内环-P-确定极性.mp4 [137.7 MB]
06-无人机-飞控任务-PID-计算逻辑编码.mp4 [54.5 MB]
📁 day_05
10-无人机-飞控系统-MPU6050-测试-零偏校准-上.mp4 [32.8 MB]
09-无人机-飞控系统-MPU6050-测试-读取加速度.mp4 [137.4 MB]
水平方向加速度计.png [114.0 KB]
05-无人机-飞控系统-MPU6050-基础驱动-编写-中.mp4 [45.1 MB]
07-无人机-飞控系统-MPU6050-读取6轴数据.mp4 [62.2 MB]
11-无人机-飞控系统-MPU6050-测试-零偏校准-下.mp4 [105.0 MB]
01-无人机-飞控系统-PID-基础理论回顾.mp4 [91.2 MB]
15-无人机-遥控端-校准手慢点.mp4 [76.6 MB]
08-无人机-飞控系统-MPU6050-测试-读取陀螺仪.mp4 [178.2 MB]
04-无人机-飞控系统-MPU6050-基础驱动-编写-上.mp4 [98.7 MB]
垂直方向加速度计.png [25.8 KB]
02-无人机-飞控系统-MPU6050-概述.mp4 [129.2 MB]
14-无人机-飞控系统-MPU6050-滤波算法演示.mp4 [121.4 MB]
12-无人机-飞控系统-MPU6050-常用滤波算法介绍.mp4 [97.6 MB]
03-无人机-飞控系统-MPU6050-内部结构&通信接口.mp4 [71.2 MB]
📁 04_视频
📁 day05
11_单环PID控制体系.mp4 [263.8 MB]
04_飞行控制电机转速设置总结.mp4 [50.9 MB]
06_完成OLED演示任务.mp4 [205.7 MB]
08_PID控制理论前置介绍.mp4 [404.3 MB]
07_显示任务总结.mp4 [4.8 MB]
05_OLED驱动介绍.mp4 [298.7 MB]
12_串级PID控制介绍.mp4 [32.6 MB]
03_比例缩小摇杆参数控制飞机飞行.mp4 [66.1 MB]
10_闭环控制系统介绍.mp4 [556.0 MB]
09_PID涉及概念介绍.mp4 [190.0 MB]
01_设置电机转速.mp4 [243.7 MB]
02_使用摇杆旋转控制方向.mp4 [226.8 MB]
📁 day07
08_调整外环Kp和内环Kd实现平衡和回正.mp4 [500.2 MB]
05_完成PID的输出值作用于电机转速.mp4 [96.9 MB]
02_完成PID计算方法.mp4 [100.4 MB]
06_PID调节的参数影响介绍.mp4 [758.1 MB]
04_完成PID计算.mp4 [73.2 MB]
07_调整俯仰角的内核KP.mp4 [562.7 MB]
10_PID飞行控制的总结.mp4 [25.1 MB]
03_确定PID计算参数.mp4 [48.6 MB]
01_四元数姿态解算.mp4 [280.1 MB]
09_调节横滚角和偏航角PID.mp4 [1.2 GB]
📁 day02
14_移植驱动开发总结.mp4 [30.0 MB]
11_驱动移植修改内容上.mp4 [207.4 MB]
13_测试移植的SI24R1驱动.mp4 [85.7 MB]
02_修改电机转速切换使用结构体.mp4 [194.1 MB]
08_SI24RI状态机.mp4 [63.5 MB]
06_SI24R1芯片介绍.mp4 [123.9 MB]
01_无人机硬件组成回顾.mp4 [40.2 MB]
04_LED灯表现形式介绍.mp4 [15.6 MB]
09_SI24R1协议包介绍.mp4 [119.5 MB]
12_驱动移植修改内容下.mp4 [75.7 MB]
05_LED灯闪烁实现.mp4 [176.0 MB]
03_LED灯控任务驱动结构编写.mp4 [164.7 MB]
10_移植SI24R1驱动准备.mp4 [59.1 MB]
07_SI24R1引脚介绍.mp4 [13.8 MB]
📁 day03
10_读取摇杆数据.mp4 [190.8 MB]
08_按键任务对应的遥控数据介绍.mp4 [51.8 MB]
06_按键长按逻辑介绍.mp4 [154.8 MB]
07_遥控数据介绍.mp4 [314.6 MB]
13_摇杆的零偏校准.mp4 [265.9 MB]
03_双端操控测试和遥控状态.mp4 [183.5 MB]
14_摇杆任务总结.mp4 [29.0 MB]
09_完成摇杆ADC加DMA的配置.mp4 [132.2 MB]
12_处理摇杆数据的极性和范围.mp4 [119.4 MB]
11_vofa软件查看波形图.mp4 [97.1 MB]
01_创建遥控器项目.mp4 [87.8 MB]
04_双端测试总结.mp4 [7.0 MB]
05_实现按键扫描逻辑.mp4 [76.1 MB]
02_遥控器项目完成2_4g信号发送.mp4 [39.3 MB]
📁 day06
06_查看陀螺仪的初始值.mp4 [314.2 MB]
08_使用滤波处理陀螺仪数据.mp4 [210.2 MB]
09_姿态解算介绍.mp4 [170.3 MB]
01_项目架构回顾.mp4 [74.9 MB]
03_MPU6050芯片组成介绍.mp4 [296.0 MB]
04_MPU6050芯片初始化介绍.mp4 [95.4 MB]
02_MPU6050芯片介绍.mp4 [58.1 MB]
05_编写MPU6050驱动.mp4 [217.4 MB]
07_实现零偏校准.mp4 [111.7 MB]
📁 day08
07_定高PID参数调节 - 副本.mp4 [135.2 MB]
08_定高PID参数确认 - 副本.mp4 [26.2 MB]
04_激光测距驱动移植 - 副本.mp4 [102.8 MB]
03_激光测高驱动介绍 - 副本.mp4 [116.6 MB]
01_定高定点逻辑介绍 - 副本.mp4 [387.1 MB]
02_激光测高传感器介绍 - 副本.mp4 [67.9 MB]
10_无人机整体架构介绍 - 副本.mp4 [51.5 MB]
06_完成PID高度计算逻辑.mp4 [141.9 MB]
09_PID回顾.mp4 [226.9 MB]
11_无人机开发流程介绍.mp4 [154.5 MB]
05_激光测距使用演示.mp4 [107.0 MB]
📁 day01
09_移植freeRTOS系统完成打印任务.mp4 [83.7 MB]
08_构建基础飞行器项目代码.mp4 [70.4 MB]
03_遥控器介绍.mp4 [87.0 MB]
04_PID控制和操作系统介绍.mp4 [121.1 MB]
15_设置电机转速任务.mp4 [71.7 MB]
01_无人机电源和动力系统介绍.mp4 [854.8 MB]
12_电源任务解析.mp4 [129.3 MB]
02_无人机飞控介绍.mp4 [118.1 MB]
05_飞行器软件结构.mp4 [262.5 MB]
14_电机参数配置.mp4 [149.7 MB]
07_定制自己的遥控器和飞行器匹配.mp4 [52.5 MB]
11_电源任务结构编写.mp4 [47.0 MB]
06_遥控器软件结构.mp4 [86.7 MB]
13_电源任务实现.mp4 [149.5 MB]
10_移植操作系统开发流程记录.mp4 [19.4 MB]
📁 day04
02_补全按键任务.mp4 [145.0 MB]
04_遥控器发送数据总结.mp4 [7.6 MB]
07_处理连接状态.mp4 [222.0 MB]
08_处理连接状态的第二种写法.mp4 [35.3 MB]
06_接收遥控数据,完成双端测试.mp4 [145.7 MB]
09_处理关机按键.mp4 [126.1 MB]
01_回顾内容.mp4 [55.4 MB]
12_状态机总结.mp4 [19.0 MB]
03_遥控器发送遥控数据.mp4 [121.9 MB]
11_油门状态机解锁机制.mp4 [405.5 MB]
05_实现飞机遥控效果.mp4 [118.1 MB]
10_飞行状态机逻辑介绍.mp4 [82.3 MB]
姿态解算.txt [497.0 B]
无人机项目开发流程3.0.xmind [260.6 KB]
03_代码.zip [131.7 MB]
PID调参.xmind [170.5 KB]
新建 文本文档.txt [109.0 B]
无人机项目开发流程1.0.xmind [4.2 MB]
无人机项目开发流程.xmind [263.0 KB]
📁 08_嵌入式技术之STM32单片机基础
📁 课堂笔记
嵌入式之STM32-Day04课堂笔记.md [2.6 KB]
嵌入式之STM32-Day06课堂笔记.md [8.2 KB]
嵌入式之STM32-Day01课堂笔记.md [2.1 KB]
嵌入式之STM32-Day02课堂笔记.md [2.9 KB]
嵌入式之STM32-Day07课堂笔记.md [3.5 KB]
嵌入式之STM32-Day05课堂笔记.md [2.5 KB]
嵌入式之STM32-Day03课堂笔记.md [2.1 KB]
嵌入式之STM32-Day08课堂笔记.md [6.9 KB]
📁 2.资料
📁 02_stm32官方资料
2-STM32F103xCDE_数据手册-中文_最新.pdf [2.8 MB]
1-STM32F10x-英文参考手册_最新.pdf [12.5 MB]
2-STM32F103xCDE_数据手册-英文_最新.pdf [3.1 MB]
STM32系统存储器启动模式.pdf [2.5 MB]
STM32F10xxx Cortex-M3编程手册-英文版-PM0056-Rev6.pdf [2.0 MB]
stm32与 lcd 连接.pdf [1.4 MB]
STM32Cube使用手册.pdf [21.9 MB]
CM3权威指南CnR2.pdf [6.6 MB]
1-STM32F10x-中文参考手册_最新.pdf [15.2 MB]
STM32F10xxx闪存编程参考手册.pdf [464.4 KB]
STM8和STM32产品选型手册.pdf [2.4 MB]
📁 05_原理图
02_扩展板.pdf [2.3 MB]
01_核心板.pdf [1.5 MB]
SCH_ZET6开发板.pdf [2.9 MB]
📁 03_工具安装包
📁 08_调试工具
PortHelper_jb51.rar [1.5 MB]
sscom5.13.1.exe [440.5 KB]
sscom51.ini [5.0 KB]
📁 05_jre
jre-8u381-windows-x64.exe [62.6 MB]
📁 03_keil 芯片支持包
Keil.STM32F1xx_DFP.2.4.1.pack [47.9 MB]
📁 01_keil_mdk 安装包
📁 2020版keil最新注册机
keygen_2032.zip [46.1 KB]
必看.txt [182.0 B]
STLinkUSBDriver.dll [114.2 KB]
MDK538a.EXE [887.3 MB]
📁 06_stm32cubemx安装包
📁 en.SetupSTM32CubeMX-6.12.1-Win
SetupSTM32CubeMX-6.12.1-Win.exe [584.7 MB]
en.SetupSTM32CubeMX-6.12.1-Win.zip [584.7 MB]
en.stm32cubemx-win-v6-10-0.zip [496.1 MB]
07_stm32_hal 离线芯片支持包.zip [211.8 MB]
📁 01_提前验证
📁 01_stlink驱动
📁 amd64
winusbcoinstaller2.dll [979.2 KB]
WdfCoInstaller01009.dll [1.6 MB]
📁 x86
WdfCoInstaller01009.dll [1.4 MB]
winusbcoinstaller2.dll [831.2 KB]
dpinst_amd64.exe [664.5 KB]
readme.txt [364.0 B]
stlink_bridge_winusb.inf [2.9 KB]
stlink_VCP.inf [2.8 KB]
dpinst_x86.exe [539.4 KB]
stlinkbridgewinusb_x86.cat [12.0 KB]
stlink_winusb_install.bat [624.0 B]
stlinkdbgwinusb_x86.cat [12.0 KB]
01_stlink驱动.zip [5.1 MB]
stlink_winusb_install_quiet.bat [630.0 B]
stlinkdbgwinusb_x64.cat [12.0 KB]
stlinkbridgewinusb_x64.cat [12.0 KB]
stlinkvcp_x64.cat [10.4 KB]
stlink_winusb_uninstall.bat [234.0 B]
stlinkvcp_x86.cat [10.4 KB]
stlink_dbg_winusb.inf [4.6 KB]
📁 03_工具
mfc140.dll [4.6 MB]
sscom51.ini [5.0 KB]
串口调试工具.exe [440.5 KB]
烧写工具.exe [26.4 MB]
📁 04_测试程序
11_实时时钟.hex [49.4 KB]
03_按键3.hex [2.8 KB]
07_SPI_Flash.hex [19.6 KB]
01_流水灯.hex [2.8 KB]
10_CAN通讯.hex [7.3 KB]
02_呼吸灯.hex [4.5 KB]
05_I2C_E2PROM.hex [5.9 KB]
09_液晶屏.hex [61.7 KB]
04_串口.hex [3.0 KB]
08_内存扩展.hex [7.9 KB]
📁 02_烧写器固件升级
Error.log [1.5 KB]
ST-LinkUpgrade.exe [1.2 MB]
尚硅谷STM32开发板验证流程.docx [2.0 MB]
04_模块手册.zip [125.4 MB]
配套硬件开发板购买地址.docx [41.9 KB]
📁 每日一考
嵌入式之STM32-Day02每日一考.md [656.0 B]
嵌入式之STM32-Day05每日一考.md [718.0 B]
嵌入式之STM32-Day06每日一考.md [614.0 B]
📁 1.笔记
01_尚硅谷嵌入式技术之STM32单片机（基础篇）2.0.0.docx [81.7 MB]
02_尚硅谷嵌入式技术之STM32单片机（进阶篇）2.0.0.docx [50.8 MB]
📁 4.视频
📁 Day07
12-IIC通信案例-纯软件实现-寄存器方式-从EEPROM中读取数据.wmv [28.3 MB]
02-回顾.wmv [79.5 MB]
03-IIC概述.wmv [26.4 MB]
05-IIC通信案例-纯软件实现-寄存器方式-初始化.wmv [30.5 MB]
08-IIC通信案例-纯软件实现-寄存器方式-接收数据和发送应答.wmv [15.2 MB]
11-IIC通信案例-纯软件实现-寄存器方式-向EEPROM写入数据.wmv [67.0 MB]
09-IIC通信案例-纯软件实现-寄存器方式-IIC通信验证.wmv [69.8 MB]
04-IIC通信案例-纯软件实现-寄存器方式-需求分析和项目创建.wmv [23.9 MB]
01-每日一考讲解.wmv [5.8 MB]
10-EEPROM硬件介绍.wmv [39.3 MB]
06-IIC通信案例-纯软件实现-寄存器方式-发送起始信号和停止信号.wmv [21.7 MB]
07-IIC通信案例-纯软件实现-寄存器方式-发送数据和接收应答.wmv [28.9 MB]
📁 Day02
07-GPIO相关寄存器介绍.wmv [19.6 MB]
01-回顾.wmv [45.4 MB]
11-流水灯案例-代码实现02.wmv [22.6 MB]
09-Keil+VSCode优化开发体验.wmv [35.6 MB]
03-点灯案例-优化2.wmv [37.8 MB]
10-流水灯案例-代码实现01.wmv [93.9 MB]
02-点灯案例-优化1.wmv [59.1 MB]
04-点灯案例-优化3.wmv [30.6 MB]
08-GPIO输出模式-输入模式.wmv [29.4 MB]
05-GPIO概述.wmv [29.9 MB]
13-流水灯案例-优化02.wmv [28.0 MB]
07-GPIO输出模式-复用输出模式.wmv [12.7 MB]
12-流水灯案例-优化01.wmv [44.4 MB]
06-GPIO输出模式-通用输出模式.wmv [54.2 MB]
📁 Day03
07-HAL开发环境搭建-STM32CubeMX.wmv [24.8 MB]
01-每日一考.wmv [7.7 MB]
05-STM32时钟系统.wmv [68.1 MB]
10-使用STM32CubeTX创建项目-时钟配置.wmv [7.3 MB]
06-HAL库介绍.wmv [13.8 MB]
04-STM32总体架构.wmv [45.1 MB]
08-HAL开发环境搭建-离线安装HAL支持包.wmv [24.1 MB]
03-作业讲解-来回流水灯.wmv [10.0 MB]
11-使用STM32CubeTX创建项目-项目配置.wmv [17.7 MB]
13-流水灯案例-使用HAL库使用.wmv [71.3 MB]
09-使用STM32CubeTX创建项目-引脚配置.wmv [46.8 MB]
12-Hal项目目录结构分析.wmv [53.7 MB]
02-回顾.wmv [8.4 MB]
📁 Day01
02-提前验证-烧录软件安装.wmv [14.6 MB]
03-提前验证-烧录软件安装-缺少dll问题解决.wmv [5.3 MB]
10-离线安装STM32F103ZE的支持包.wmv [32.4 MB]
13-点亮LED需求和思路分析.wmv [15.3 MB]
08-STM32开发工具介绍.wmv [6.4 MB]
08-STM32的三种开发方式.mv [9.4 MB]
05-提前验证-验证程序.wmv [68.8 MB]
14-点灯案例-项目准备.wmv [32.2 MB]
09-Keil MDK的安装和破解.wmv [49.7 MB]
19-点灯案例-代码编写.wmv [140.1 MB]
07-STM32芯片命名规则.wmv [22.7 MB]
04-提前验证-烧录程序演示.wmv [10.0 MB]
16-点灯案例-工程配置02.wmv [12.4 MB]
12-STM32最小系统电路.wmv [70.3 MB]
20-点灯案例-keil的stlink烧录配置.wmv [44.8 MB]
17-点灯案例-编译配置01.wmv [20.7 MB]
06-ARM和STM32介绍.wmv [24.3 MB]
15-点灯案例-工程配置01.wmv [9.4 MB]
01-提前验证-STLinkK驱动安装.wmv [77.6 MB]
18-点灯案例-编译配置02.wmv [31.8 MB]
11-开发板介绍.wmv [293.7 MB]
📁 Day04
10-外部中断案例-寄存器版-代码实现01-EXTI和NVIC配置.wmv [55.3 MB]
03-STM32的中断介绍.wmv [35.3 MB]
08-外部中断案例-寄存器版-代码实现01.wmv [27.9 MB]
01-回顾总结.wmv [20.4 MB]
15-外部中断案例-HAL库实现-项目创建和代码结构分析.wmv [49.8 MB]
11-外部中断案例-寄存器版-代码实现01-中断服务程序.wmv [35.5 MB]
14-课堂练习案例-三个按键控制三个LED-寄存器实现.wmv [88.5 MB]
05-STM32NVIC和中断优先级.wmv [58.4 MB]
16-外部中断案例-HAL库实现-中断服务程序.wmv [40.0 MB]
02-中断介绍.wmv [17.2 MB]
04-STM32中断体系架构.wmv [29.3 MB]
07-外部中断案例检测按键按下-需求分析和硬件电路设计.wmv [25.4 MB]
09-外部中断案例-寄存器版-代码实现01-配置GPIO和AFIO.wmv [37.9 MB]
17-课堂练习案例-三个按键控制三个LED-HAL库实现.wmv [50.5 MB]
13-外部中断总结.wmv [14.4 MB]
06-EXTI中断控制寄存器.wmv [48.9 MB]
12-外部中断案例-寄存器版-代码实现01-防抖处理.wmv [11.8 MB]
📁 Day05
10-STM32串口模块总结.wmv [15.6 MB]
04-通信基础知识回顾.wmv [18.0 MB]
12-USART案例-寄存器实现-轮询方案-发送和接收单字节数据.wmv [58.7 MB]
02-作业讲解-按键开关流水灯-寄存器实现.wmv [100.5 MB]
03-作业讲解-按键开关流水灯-HAL库实现.wmv [52.0 MB]
11-USART案例-寄存器实现-轮询方案-初始化.wmv [83.8 MB]
07-STM32的USART相关寄存器.wmv [19.6 MB]
16-USART案例-寄存器实现-中断方案-使用回调函数将中断服务程序中获取的数据传出来.wmv [41.3 MB]
01-回顾.wmv [38.6 MB]
05-STM32的USART通讯.wmv [24.3 MB]
08-STM32的USART波特率计算.wmv [36.7 MB]
09-STM32的USART对应引脚.wmv [15.5 MB]
14-USART案例-寄存器实现-轮询方案-接收多字节数据.wmv [59.0 MB]
15-USART案例-寄存器实现-中断方案-接收完数据触发中断.wmv [79.7 MB]
13-USART案例-寄存器实现-轮询方案-发送多字节数据.wmv [22.5 MB]
06-STM32的USART功能框图.wmv [74.0 MB]
📁 Day08
03-IIC通信案例-硬件实现-寄存器方式-项目改造.wmv [15.6 MB]
06-IIC通信案例-硬件实现-寄存器方式-开始信号停止信号和发送ACK.wmv [61.6 MB]
09-IIC通信案例-硬件实现-寄存器方式-接收一个字节的数据.wmv [15.7 MB]
05-IIC通信案例-硬件实现-寄存器方式-初始化-I2C相关配置.wmv [95.8 MB]
02-STM32内置的I2C模块介绍.wmv [49.7 MB]
07-IIC通信案例-硬件实现-寄存器方式-发送从设备地址.wmv [37.6 MB]
10-IIC通信案例-硬件实现-寄存器方式-读写EEPROM.wmv [46.2 MB]
04-IIC通信案例-硬件实现-寄存器方式-初始化-时钟使能和引脚模式.wmv [26.2 MB]
01-回顾.wmv [7.3 MB]
08-IIC通信案例-硬件实现-寄存器方式-发送一个字节的数据.wmv [32.2 MB]
11-IIC通信案例-硬件实现-HAL库方式.wmv [110.9 MB]
📁 Day06
01-每日一考讲解.wmv [9.4 MB]
02-回顾.wmv [28.7 MB]
09-Keil断点调试和中断.wmv [4.3 MB]
07-使用printf调试单片机代码-HAL库方式-重定义fputc.wmv [18.0 MB]
09-Keil断点调试-显示GPIO寄存器.wmv [3.5 MB]
03-USART案例-HAL库实现-轮询方式接收数据.wmv [113.7 MB]
08-Keil断点调试.wmv [34.5 MB]
04-USART案例-HAL库实现-中断方式接收数据.wmv [104.9 MB]
05-使用printf调试单片机代码-实现原理.wmv [18.8 MB]
06-使用printf调试单片机代码-寄存器方式-重定义fputc.wmv [49.4 MB]
3.代码.zip [46.1 MB]
STM32单片机(基础)总结串讲.xmind [172.6 KB]
小黑板.txt [802.0 B]
📁 04_嵌入式技术之从零搭建计算机
📁 4.视频
📁 Day03
05-设计简单单片机-添加数据内存-ALU和数据内存.wmv [31.1 MB]
03-设计简单单片机-添加数据内存-自定义数据内存01-38译码器.wmv [68.2 MB]
13-添加外设寄存器-读操作.wmv [17.2 MB]
01-每日一考讲解.wmv [8.8 MB]
09-上午电路总结.wmv [14.9 MB]
04-设计简单单片机-添加数据内存-自定义数据内存02.wmv [50.6 MB]
08-设计简单单片机-添加其他运算.wmv [16.3 MB]
02-回顾总结.wmv [18.7 MB]
12-添加外设寄存器-写操作.wmv [80.0 MB]
11-设计简单单片机-添加控制器.wmv [35.1 MB]
16-常见数字芯片介绍.wmv [92.2 MB]
14-封装单片机组件.wmv [16.9 MB]
07-设计简单单片机-添加程序计数器.wmv [27.5 MB]
10-设计简单单片机-设计自己的指令集.wmv [56.6 MB]
15-设计简单单片机-流水灯.wmv [40.4 MB]
06-设计简单单片机-添加指令内存.wmv [22.5 MB]
📁 Day01
06-基本门电路-非门.wmv [53.1 MB]
03-二进制表示图片.wmv [25.5 MB]
08-其他门电路-或门.wmv [9.0 MB]
07-基本门电路-与门.wmv [15.0 MB]
16-存储电路-SR锁存器.wmv [45.0 MB]
02-二进制表示文字.wmv [48.4 MB]
09-基本门电路-与非门.wmv [25.7 MB]
17-存储电路概述.wmv [3.4 MB]
15-运算器-4位加法器.wmv [39.2 MB]
13-运算器-将1位半加器封装为自定义组件.wmv [10.0 MB]
10-基本门电路-或非门.wmv [6.6 MB]
14-运算器-1位全加器.wmv [22.0 MB]
01-每日一考讲解.wmv [15.8 MB]
04-二进制表示声音和视频.wmv [25.3 MB]
12-运算器-1位半加器.wmv [28.9 MB]
05-数字电路仿真软件digital.wmv [27.7 MB]
11-基本门电路-异或非门.wmv [5.3 MB]
📁 Day02
03-回顾-SR锁存器.wmv [12.2 MB]
05-存储电路-D触发器-为什么边沿触发.wmv [38.2 MB]
13-计算机组成原理-现代计算机组成-指令集系统.wmv [47.5 MB]
07-存储电路-D触发器-内置D触发器组件.wmv [3.8 MB]
06-存储电路-D触发器-电路实现.wmv [18.2 MB]
16-设计简单单片机-使用ALU实现多个数字相加.wmv [27.9 MB]
02-回顾-运算器电路.wmv [11.5 MB]
01-每日一考-门电路复习.wmv [41.1 MB]
11-计算机组成原理-现代计算机组成-存储器.wmv [20.3 MB]
14-设计简单单片机-ALU设计-复用器.wmv [22.5 MB]
12-计算机组成原理-现代计算机组成-三大总线.wmv [13.1 MB]
04-存储电路-带en输入的D锁存器.wmv [37.2 MB]
08-存储电路-寄存器电路.wmv [29.6 MB]
09-计算机组成原理-冯诺依曼模型.wmv [31.8 MB]
15-设计简单单片机-ALU设计-电路实现.wmv [68.6 MB]
📁 1.笔记
尚硅谷嵌入式技术之从零搭建计算机1.6.0.docx [47.6 MB]
📁 数字电路图截图
📁 第1章数字电路基础
📁 05-寄存器
01-寄存器.png [52.6 KB]
📁 03-运算器
01-1位半加器.png [26.4 KB]
03-4位加法器.png [51.8 KB]
02-1位全加器.png [20.3 KB]
📁 01-基础门电路
02-与门.png [65.3 KB]
01-非门.png [20.8 KB]
03-或门.png [34.5 KB]
📁 02-其他门电路
03-或非门.png [34.8 KB]
01-异或门.png [65.2 KB]
02-与非门.png [35.1 KB]
04-异或非门.png [39.4 KB]
05-门电路符号.png [20.5 KB]
📁 04-锁存器和触发器
01-SR锁存器.png [30.0 KB]
03-D触发器.png [13.3 KB]
02-D锁存器.png [71.6 KB]
📁 第3章设计简单单片机
📁 01-实现一个ALU
01-实现一个ALU.png [79.5 KB]
📁 04-添加指令内存
03-运算电路中添加程序计数器.png [77.8 KB]
02-程序计数器.png [29.6 KB]
01-添加指令内存.png [76.9 KB]
📁 05-添加其他运算
01-添加其他运算.png [101.0 KB]
📁 06-设计指令集
01-设计指令集.png [101.1 KB]
📁 07-添加控制器
01-控制器.png [19.8 KB]
02-总电路添加控制器.png [73.2 KB]
📁 02-使用ALU和寄存器实现计算
01-使用ALU和寄存器实现计算.png [16.9 KB]
📁 03-添加数据内存
02-使用寄存器自定义内存.png [127.7 KB]
03-ALU添加数据内存.png [51.2 KB]
01-38译码器.png [91.3 KB]
📁 08-添加外设控制寄存器
01-添加外设寄存器.png [132.5 KB]
📁 09-流水灯
02-流水灯.png [69.1 KB]
01-MCU.png [121.8 KB]
📁 2.资料
📁 1.安装包
jdk-17_windows-x64_bin.msi [152.3 MB]
Digital.zip [11.8 MB]
图片1.jpg [498.2 KB]
图片2.png [557.0 KB]
74系列芯片.pdf [383.1 KB]
📁 数字电路图
📁 第3章设计简单单片机
📁 03-添加数据内存
02-使用寄存器自定义内存电路.dig [29.9 KB]
01-38译码器.dig [12.5 KB]
03-ALU添加数据内存.dig [6.6 KB]
📁 02-使用ALU和寄存器实现计算
01-使用ALU和寄存器实现计算.dig [3.7 KB]
📁 04-添加指令内存
02-程序计数器.dig [2.9 KB]
01-添加指令内存.dig [8.6 KB]
03-运算电路添加程序计数器.dig [8.9 KB]
📁 01-实现一个ALU
01-实现一个ALU.dig [22.3 KB]
02-复用器.dig [6.4 KB]
📁 06-设计指令集
01-设计指令集.dig [9.7 KB]
📁 05-添加其他运算
01-添加其他运算.dig [9.3 KB]
📁 09-流水灯
02-流水灯.dig [3.5 KB]
01-MCU.dig [21.5 KB]
📁 08-添加外设控制寄存器
01-添加外设控制寄存器.dig [22.0 KB]
📁 其他
4位左移器.dig [18.1 KB]
📁 07-添加控制器
02-总电路添加控制器.dig [11.9 KB]
01-控制器.dig [3.1 KB]
📁 第1章数字电路基础
📁 03-运算器
01-半加器.dig [2.5 KB]
03-4位加法器.dig [14.1 KB]
02-1位全加器.dig [3.1 KB]
📁 04-锁存器和触发器
03-D触发器.dig [3.6 KB]
01-SR锁存器.dig [3.0 KB]
02-D锁存器.dig [4.1 KB]
📁 05-寄存器
01-寄存器.dig [11.9 KB]
📁 01-基础门电路
03-或门.dig [4.1 KB]
01-非门.dig [4.2 KB]
02-与门.dig [3.6 KB]
📁 02-其他门电路
03-或非门.dig [1.4 KB]
04-异或非门.dig [1.4 KB]
05-门电路符号.dig [1.8 KB]
02-与非门.dig [1.4 KB]
01-异或门.dig [5.0 KB]
📁 每日一考
03-01.png [38.9 KB]
02-01.png [24.7 KB]
嵌入式之从零搭建计算机-Day01每日一考-答案.png [91.2 KB]
嵌入式之从零搭建计算机-Day01每日一考.png [34.7 KB]
嵌入式之从零搭建计算机-Day02每日一考.md [671.0 B]
嵌入式之从零搭建计算机-Day03每日一考.md [1.2 KB]
小黑板.txt [3.5 KB]
嵌入式之从零搭建计算机-课堂笔记.md [7.9 KB]
指令集.xlsx [10.6 KB]
📁 07_嵌入式项目之51智能车
📁 2.资料
📁 器件手册
JDY-23-V2.1_BLE_5.0_Datasheet.pdf [493.2 KB]
ECB01C蓝牙芯片技术手册V1.2.pdf [629.2 KB]
393芯片中文手册.pdf [1.0 MB]
ECB01系列蓝牙AT命令手册V1.1.pdf [192.0 KB]
HC-SR04超声波测距模块说明书.pdf [427.8 KB]
TA6586.pdf [116.6 KB]
STC89C51RC-RD.pdf [15.6 MB]
LM393N.pdf [1.2 MB]
BDR6622T手册.pdf [1.4 MB]
📁 原理图
📁 51教学_backup
51教学_v3140_2024-09-02-12-13.zip [5.3 MB]
51教学.eprj [38.8 MB]
SCH_51小车SMT版.pdf [611.0 KB]
📁 1.笔记
尚硅谷嵌入式项目之51智能车2.0.0.docx [25.0 MB]
📁 4.视频
📁 Day02
07-51智能车-避障功能-电机模块-代码实现03-速度逐级更新.wmv [54.6 MB]
08-51智能车-避障功能-电机模块-总结.wmv [33.3 MB]
13-51智能车-遥控功能-应用层.wmv [64.3 MB]
03-51智能车-避障功能-电机模块-前进后退以及加速减速的原理.wmv [26.8 MB]
09-51智能车-避障功能-应用层代码实现.wmv [29.3 MB]
04-51智能车-避障功能-电机模块-左轮右轮前进后退代码演示.wmv [56.5 MB]
11-51智能车-遥控功能-整体介绍.wmv [19.0 MB]
05-51智能车-避障功能-电机模块-代码实现01.wmv [62.2 MB]
01-回顾.wmv [16.2 MB]
10-51智能车-避障功能-切换编译目标.wmv [52.7 MB]
12-51智能车-遥控功能-蓝牙模块.wmv [165.2 MB]
02-51智能车-避障功能-电机模块-电机驱动芯片介绍.wmv [47.7 MB]
06-51智能车-避障功能-电机模块-代码实现02.wmv [40.3 MB]
📁 Day01
08-51智能车-避障功能-基础准备-定时器0改为定时器2.wmv [79.1 MB]
02-51单片机串讲.wmv [13.2 MB]
11-51智能车-避障功能-超声测距原理介绍.wmv [75.0 MB]
14-51智能车-避障功能-测试.wmv [23.8 MB]
06-51智能车-软件整体架构设计.wmv [12.5 MB]
01-每日一考讲解.wmv [14.0 MB]
09-51智能车-避障功能-基础准备-修改定时器回调函数添加删除调用的规则.wmv [36.8 MB]
03-51智能车-功能概述.wmv [62.3 MB]
15-51智能车-避障功能-总结.wmv [5.8 MB]
13-51智能车-避障功能-代码实现02.wmv [51.6 MB]
12-51智能车-避障功能-代码实现01.wmv [74.0 MB]
07-51智能车-避障功能-基础准备-GPIO引脚定义.wmv [77.5 MB]
04-51智能车-硬件设计概述-动力系统.wmv [98.1 MB]
10-51智能车-避障功能-基础准备-使用定时器2改造蜂鸣器.wmv [30.5 MB]
05-51智能车-硬件设计概述-其他.wmv [35.7 MB]
📁 Day03
03-51智能车-巡线功能-应用层-使用误差调整小车姿态.wmv [35.7 MB]
08-51智能车-模式切换-应用层-按键切换模式代码实现.wmv [71.6 MB]
10-51智能车-模式切换-应用层-利用B寄存器提高IIC传输速度.wmv [53.4 MB]
02-51智能车-巡线功能-光电反射传感器-代码实现.wmv [117.3 MB]
09-51智能车-模式切换-应用层-倒计时代码实现以及功能演示.wmv [77.3 MB]
07-51智能车-模式切换-独立按键测试.wmv [20.0 MB]
06-51智能车-模式切换-独立按键代码实现.wmv [70.9 MB]
01-51智能车-巡线功能-光电反射传感器-硬件电路原理分析.wmv [77.7 MB]
05-51智能车-巡线功能-应用层-使用PID调整小车姿态-代码实现.wmv [55.4 MB]
11-51智能车-终章-主控逻辑.wmv [85.3 MB]
04-51智能车-巡线功能-应用层-PID原理讲解.wmv [60.1 MB]
3.代码.zip [3.8 MB]
51单片机串讲.xmind [119.0 KB]
嵌入式之51智能车-课堂笔记.md [3.5 KB]
小黑板.txt [313.0 B]
📁 11嵌入式技术之STM32单片机高级
📁 02视频
📁 day02
11_W5500初始化完成.mp4 [94.8 MB]
02_CAN代码总结回顾.mp4 [38.3 MB]
05_以太网基础介绍.mp4 [92.9 MB]
04_双机测试CAN.mp4 [633.4 MB]
07_计算机网络常用协议.mp4 [91.5 MB]
06_计算机网络分层.mp4 [84.0 MB]
08_W5500芯片介绍.mp4 [57.1 MB]
10_W5500移植配置.mp4 [119.6 MB]
03_HAL库实现CAN测试.mp4 [162.9 MB]
01_每日一考.mp4 [29.2 MB]
09_W5500芯片结构.mp4 [338.6 MB]
📁 day09
02_RTC实时时钟介绍.mp4 [250.7 MB]
05_备份寄存器使用演示.mp4 [257.7 MB]
10_演示错误介绍.mp4 [23.2 MB]
11_hal库实现RTC时钟.mp4 [69.5 MB]
03_RTC时钟使用介绍.mp4 [106.2 MB]
01_每日一考.mp4 [28.4 MB]
09_RTC实时时钟唤醒演示.mp4 [29.5 MB]
07_hal库实现BKP.mp4 [77.8 MB]
08_RTC实时时钟唤醒代码编写.mp4 [165.2 MB]
04_备份寄存器介绍.mp4 [29.5 MB]
06_演示纠错.mp4 [103.6 MB]
📁 day01
13_CAN的初始化配置.mp4 [108.5 MB]
15_CAN的接收数据编写.mp4 [85.6 MB]
16_CAN的代码演示.mp4 [46.4 MB]
09_CAN的外设结构介绍.mp4 [71.4 MB]
14_CAN的发送数据编写.mp4 [100.9 MB]
04_CAN的数据类型介绍.mp4 [46.6 MB]
01_物联网通信介绍.mp4 [50.2 MB]
11_CAN的引脚初始化.mp4 [33.0 MB]
05_数据格式介绍.mp4 [35.6 MB]
12_初始化使用寄存器介绍.mp4 [87.5 MB]
06_总线仲裁.mp4 [37.8 MB]
07_CAN的位同步.mp4 [37.5 MB]
08_外设结构和工作模式测试模式介绍.mp4 [31.3 MB]
02_CAN通信基础介绍.mp4 [30.9 MB]
03_CAN通信物理层介绍.mp4 [295.9 MB]
10_硬件连接.mp4 [151.6 MB]
📁 day07
07_完成LoRa驱动的测试.mp4 [56.6 MB]
08_CAN总线通信回顾.mp4 [116.4 MB]
01_每日一考.mp4 [22.4 MB]
02_LoRa移植的准备工作.mp4 [131.6 MB]
11_LoRa回顾.mp4 [22.9 MB]
03_耦合SPI驱动和官方驱动的代码.mp4 [128.2 MB]
09_以太网回顾.mp4 [64.6 MB]
06_完成LoRa驱动.mp4 [109.6 MB]
05_完成LoRa的初始化.mp4 [205.4 MB]
10_wifi和蓝牙回顾.mp4 [121.2 MB]
04_官方驱动函数指针封装到结构体.mp4 [85.0 MB]
📁 day05
09_ESP服务端发送数据.mp4 [48.9 MB]
01_每日一考.mp4 [9.8 MB]
02_初始化ESP32.mp4 [313.8 MB]
10_蓝牙背景介绍.mp4 [215.5 MB]
08_ESP32服务端接收数据处理.mp4 [73.3 MB]
07_ESP32服务端接收数据展示.mp4 [271.4 MB]
11_蓝牙应用场景介绍.mp4 [22.1 MB]
05_ESP32的wifi热点模式.mp4 [39.1 MB]
04_ESP32连接电脑的热点.mp4 [68.1 MB]
03_完成初始化.mp4 [19.0 MB]
06_ESP32的TCP服务器.mp4 [29.9 MB]
📁 day04
03_UDP完成数据发送.mp4 [92.3 MB]
11_ESP32使用AT指令逻辑介绍.mp4 [169.3 MB]
06_web后端页面处理.mp4 [457.7 MB]
04_UDP完成接收数据.mp4 [62.0 MB]
02_UDP的结构介绍.mp4 [31.5 MB]
09_WIFI各种设备名称介绍.mp4 [40.6 MB]
10_ESP32芯片介绍.mp4 [221.2 MB]
01_每日一考.mp4 [20.5 MB]
05_web前端页面介绍.mp4 [110.1 MB]
07_WIFI基础介绍.mp4 [126.1 MB]
08_2.4G信道.mp4 [53.1 MB]
12_ESP32烧录固件.mp4 [154.0 MB]
📁 day08
10_系统时钟配置实现.mp4 [143.2 MB]
11_hal库实现停机模式.mp4 [45.5 MB]
08_睡眠模式在HAL库中的问题解决.mp4 [71.7 MB]
07_睡眠模式在HAL库中的问题.mp4 [170.0 MB]
12_待机模式演示.mp4 [503.9 MB]
03_电源结构介绍.mp4 [189.2 MB]
01_每日一考.mp4 [8.0 MB]
09_停机模式使用演示.mp4 [310.4 MB]
04_低功耗的三种模式.mp4 [84.6 MB]
02_拓展篇介绍.mp4 [64.1 MB]
06_睡眠模式寄存器演示.mp4 [184.7 MB]
05_三种低功耗模式详细介绍.mp4 [28.4 MB]
📁 day10
04_独立看门狗使用演示.mp4 [79.7 MB]
09_STM32拓展回顾.mp4 [13.4 MB]
05_窗口看门狗介绍.mp4 [36.4 MB]
06_STM32基础回顾.mp4 [50.2 MB]
07_STM32进阶回顾.mp4 [78.5 MB]
02_hal库实现实时时钟.mp4 [46.4 MB]
01_演示实时时钟.mp4 [181.6 MB]
08_STM32物联网回顾.mp4 [43.2 MB]
03_独立看门狗介绍.mp4 [82.6 MB]
📁 day06
05_BLE读取数据.mp4 [215.8 MB]
02_BLE角色划分和地址介绍.mp4 [30.8 MB]
08_LoRa介绍.mp4 [136.6 MB]
07_低功耗广域网介绍.mp4 [53.6 MB]
01_蓝牙协议简介.mp4 [121.9 MB]
03_BLE使用流程和透传模式介绍.mp4 [38.7 MB]
04_BLE广播连接交互使用.mp4 [577.3 MB]
06_BLE写入数据.mp4 [127.4 MB]
📁 day03
02_socket编程介绍.mp4 [155.2 MB]
04_socket接收数据代码.mp4 [122.9 MB]
03_socket创建连接代码实现.mp4 [84.9 MB]
06_socket客户端实现.mp4 [105.2 MB]
05_socket发送数据.mp4 [27.8 MB]
01_每日一考.mp4 [33.8 MB]
07_socket客户端实现.mp4 [56.1 MB]
📁 01资料
03_尚硅谷嵌入式技术之STM32单片机（高级篇）2.0.0.docx [21.7 MB]
03_尚硅谷嵌入式技术之STM32单片机（高级篇）2.0.1.docx [35.4 MB]
tcp连接发送数据流程.bmpr [28.0 KB]
04代码.zip [141.3 MB]
📁 05_嵌入式技术之原理图与PCB制作（预习）
📁 01笔记
尚硅谷嵌入式技术之原理图&PCB设计（入门到进阶）1.6.0.docx [52.9 MB]
尚硅谷嵌入式技术之原理图&PCB设计（51核心板设计）1.6.0.docx [56.6 MB]
📁 02.资料
📁 1.安装包
jlc-assistant-window-ia32-5.1.10.exe [67.2 MB]
PCB线宽计算器.exe [140.0 KB]
lceda-pro-windows-x64-2.2.32.3.exe [193.4 MB]
lceda-pro-windows-x64-2.2.25.2.exe [196.9 MB]
📁 2.电子书
图解电子元器件-机翻版.pdf [186.1 MB]
图解电子元器件-英文原版.pdf [22.4 MB]
📁 3.数据手册
CH340USB转串口芯片.pdf [227.1 KB]
STC89C52RC-40I-LQFP44_规格书.PDF [4.6 MB]
📁 0805B561K101NT电容资料
数据手册.PDF [998.0 KB]
原理图符号.png [9.3 KB]
封装图.png [3.2 KB]
📁 CH340N SOP-8芯片资料
封装图.png [9.1 KB]
CH340N SOP-8.pdf [227.1 KB]
原理图符号.png [22.5 KB]
标准SOP-8贴片封装尺寸.jpg [242.1 KB]
📁 常见产品的电路板
07.电视.webp [43.3 KB]
01.台式机主板.jpg [166.7 KB]
11.耳机.jpg [474.7 KB]
06.U盘.jpg [126.4 KB]
05.固态硬盘.jpg [133.1 KB]
09.遥控器.jpg [79.7 KB]
16.导弹电路板.jpg [156.6 KB]
03.显卡.png [655.2 KB]
08.路由器.jpg [81.2 KB]
12.洗衣机.jpg [110.0 KB]
14.玩具车·.jpg [94.8 KB]
04.内存条.png [342.5 KB]
02.笔记本主板.jpg [103.2 KB]
10.空调室外机.jpg [38.1 KB]
15.汽车电路板.jpg [269.9 KB]
13.键盘.jpg [158.2 KB]
logo.png [11.1 KB]
核心板板框尺寸.png [32.4 KB]
尚硅谷logo.png [223.3 KB]
开漏输出和推挽输出.dig [3.8 KB]
📁 每日一考
嵌入式原理图与PCB制作-每日一考.md [511.0 B]
IC.png [285.6 KB]
📁 projects
📁 01-按键点灯V1.0.0_2024-10-10_backup
01-按键点灯V1.0.0_2024-10-10_v43_2024-10-10-16-08.zip [25.8 KB]
01-按键点灯V1.0.0_2024-10-10_v47_2024-10-10-17-08.zip [25.8 KB]
01-按键点灯V1.0.0_2024-10-10_v32_2024-10-10-15-02.zip [22.5 KB]
📁 05
05-51核心板V1.0.0_2024-10-13_v47_2024-10-13-11-10.zip [34.6 KB]
05-51核心板V1.0.0_2024-10-13_v20_2024-10-13-10-10.zip [20.1 KB]
05-51核心板V1.0.0_2024-10-13_v115_2024-10-13-16-26.zip [70.4 KB]
05-51核心板V1.0.0_2024-10-13_v95_2024-10-13-15-26.zip [64.7 KB]
📁 02
02-38译码器和245驱动器-进阶案例_2024-10-12_v93_2024-10-12-14-08.zip [45.9 KB]
02-38译码器和245驱动器-进阶案例_2024-10-12_v62_2024-10-12-11-07.zip [32.6 KB]
📁 02-38译码器和245驱动器-进阶案例_2024-10-12_backup
02-38译码器和245驱动器-进阶案例_2024-10-12_v64_2024-10-12-14-58.zip [44.7 KB]
02-38译码器和245驱动器-进阶案例_2024-10-12_v70_2024-10-12-16-58.zip [46.4 KB]
02-38译码器和245驱动器-进阶案例_2024-10-12_v73_2024-10-12-17-58.zip [114.1 KB]
02-38译码器和245驱动器-进阶案例_2024-10-12_v65_2024-10-12-15-58.zip [44.7 KB]
02-38译码器和245驱动器-进阶案例_2024-10-12_v55_2024-10-12-11-58.zip [44.4 KB]
02-38译码器和245驱动器-进阶案例_2024-10-12_v21_2024-10-12-09-53.zip [18.1 KB]
02-38译码器和245驱动器-进阶案例_2024-10-12_v62_2024-10-12-13-58.zip [44.5 KB]
02-38译码器和245驱动器-进阶案例_2024-10-12_v36_2024-10-12-10-53.zip [30.9 KB]
02-38译码器和245驱动器-进阶案例_2024-10-12_v56_2024-10-12-12-58.zip [44.5 KB]
📁 03-高级技巧案例-2024-10-12_backup
03-高级技巧案例-2024-10-12_v559_2024-10-12-15-59.zip [1.7 MB]
📁 05-51核心板V1.0.0_2024-10-13_backup
05-51核心板V1.0.0_2024-10-13_v21_2024-10-13-10-29.zip [24.7 KB]
05-51核心板V1.0.0_2024-10-13_v116_2024-10-14-11-06.zip [94.6 KB]
05-51核心板V1.0.0_2024-10-13_v127_2024-10-14-14-42.zip [96.6 KB]
05-51核心板V1.0.0_2024-10-13_v40_2024-10-13-11-29.zip [47.2 KB]
05-51核心板V1.0.0_2024-10-13_v71_2024-10-13-15-04.zip [68.2 KB]
05-51核心板V1.0.0_2024-10-13_v147_2024-10-14-16-56.zip [98.0 KB]
05-51核心板V1.0.0_2024-10-13_v110_2024-10-13-19-16.zip [94.7 KB]
05-51核心板V1.0.0_2024-10-13_v100_2024-10-13-17-04.zip [87.4 KB]
05-51核心板V1.0.0_2024-10-13_v138_2024-10-14-15-42.zip [96.3 KB]
05-51核心板V1.0.0_2024-10-13_v60_2024-10-13-13-53.zip [56.8 KB]
05-51核心板V1.0.0_2024-10-13_v85_2024-10-13-16-04.zip [73.6 KB]
📁 06-自定义器件库V1.0.0_2024-10-14_backup
06-自定义器件库V1.0.0_2024-10-14_v10_2024-10-14-10-06.zip [12.2 KB]
05-51核心板V1.0.0_2024-10-13.eprj [1.4 MB]
03-高级技巧案例-2024-10-12.eprj [11.8 MB]
01-按键点灯V1.0.0_2024-10-10.eprj [572.0 KB]
06-自定义器件库V1.0.0_2024-10-14.eprj [380.0 KB]
04-51教学板（参考）.eprj [34.4 MB]
02.eprj [1.2 MB]
02-38译码器和245驱动器-进阶案例_2024-10-12.eprj [1.1 MB]
05.eprj [1.3 MB]
📁 libraries
个人器件.elib [376.0 KB]
📁 51核心板项目网络标签资料
22P排针.csv [1.0 KB]
MCU.csv [2.2 KB]
20P排针.csv [974.0 B]
📁 04.视频
📁 Day04
01-自定义器件-创建器件库.wmv [9.1 MB]
04-自定义器件-专业模式下新建器件以及使用引导编辑符号.wmv [35.9 MB]
05-自定义器件-手绘方式绘制封装.wmv [59.6 MB]
06-自定义器件-使用引导方式绘制封装.wmv [45.5 MB]
03-自定义器件-手动绘制原理图符号.wmv [16.0 MB]
02-自定义器件-标准模式下新建器件.wmv [14.0 MB]
📁 Day01
18-速通PCB设计流程-原理图设计-原理图属性信息设置.wmv [23.0 MB]
21-速通PCB设计流程-原理图设计-DRC检查和非连接标识.wmv [7.9 MB]
31-速通PCB设计流程-PCB设计-总结.wmv [6.6 MB]
08-嘉立创EDA安装.wmv [80.1 MB]
30-速通PCB设计流程-PCB设计-DRC检查.wmv [10.4 MB]
06-电子元器件封装形式-贴片电阻电容封装.wmv [67.1 MB]
26-速通PCB设计流程-PCB设计-器件摆放和2D3D预览.wmv [27.1 MB]
05-电子元器件封装形式-常见IC封装.wmv [100.8 MB]
20-速通PCB设计流程-原理图设计-导线连接元器件.wmv [23.1 MB]
19-速通PCB设计流程-原理图设计-放置器件和器件属性.wmv [77.0 MB]
01-每日一考讲解.wmv [14.1 MB]
32-速通PCB设计流程-下单.wmv [85.4 MB]
04-多层板孔的分类.wmv [65.7 MB]
29-速通PCB设计流程-PCB设计-PCB图层管理和过孔.wmv [53.2 MB]
25-速通PCB设计流程-PCB设计-主题和颜色设置.wmv [12.0 MB]
02-PCB介绍.wmv [86.0 MB]
24-速通PCB设计流程-PCB设计-从原理图生成PCB.wmv [14.4 MB]
09-嘉立创EDA设置.wmv [24.5 MB]
07-PCB设计到打样的一般流程.wmv [45.9 MB]
10-立创开源硬件平台.wmv [52.1 MB]
23-EDA快捷键设置.wmv [9.8 MB]
22-速通PCB设计流程-原理图设计-总结.wmv [9.3 MB]
03-PCB加工工艺.wmv [275.8 MB]
27-速通PCB设计流程-PCB设计-板框设计.wmv [64.5 MB]
28-速通PCB设计流程-PCB设计-布线.wmv [65.8 MB]
11-速通PCB设计流程-创建工程.wmv [36.6 MB]
📁 Day03
04-51核心板工程-原理图设计-供电模块-自恢复保险丝.wmv [42.6 MB]
01-51核心板工程介绍.wmv [53.5 MB]
19-51核心板工程-PCB设计-排针排布和丝印.wmv [120.1 MB]
09-51核心板工程-原理图设计-MCU最小系统-排针.wmv [35.2 MB]
02-51单片机介绍.wmv [121.2 MB]
03-51核心板工程-原理图设计-供电模块-typec接口.wmv [154.7 MB]
08-51核心板工程-原理图设计-MCU最小系统-MCU电源.wmv [76.1 MB]
10-51核心板工程-原理图设计-MCU最小系统-晶振电路.wmv [67.7 MB]
05-51核心板工程-原理图设计-供电模块-低压差线性稳压芯片.wmv [78.3 MB]
18-51核心板工程-PCB设计-板框.wmv [60.4 MB]
06-SMT基础库和标准库.wmv [15.7 MB]
11-51核心板工程-原理图设计-MCU最小系统-复位电路.wmv [74.0 MB]
20-51核心板工程-PCB设计-logo和缝合孔以及拼版设置.wmv [58.7 MB]
17-51核心板工程-原理图设计-如何根据实物修改位号.wmv [38.4 MB]
15-51核心板工程-原理图设计-烧录模块-硬复位开关2.wmv [30.2 MB]
13-51核心板工程-原理图设计-烧录模块-ch340k芯片.wmv [99.3 MB]
16-51核心板工程-原理图设计-指示灯.wmv [28.2 MB]
12-51核心板工程-原理图设计-MCU最小系统-P0上拉电阻.wmv [29.7 MB]
14-51核心板工程-原理图设计-烧录模块-硬复位开关.wmv [34.8 MB]
📁 Day02
13-PCB设计进阶-铺铜和过滤的使用.wmv [74.2 MB]
01-每日一考讲解.wmv [7.7 MB]
14-PCB设计进阶-添加丝印.wmv [106.4 MB]
08-PCB设计进阶-完成38译码器的原理图设计.wmv [47.8 MB]
12-PCB设计进阶-泪滴的使用.wmv [21.4 MB]
16-PCB设计高级技巧-GND周围有孤铜.wmv [70.7 MB]
09-PCB设计进阶-245驱动器原理图.wmv [66.7 MB]
04-PCB设计进阶-USB供电模块.wmv [129.1 MB]
10-PCB设计进阶-器件摆放对齐分布和交叉选择.wmv [91.6 MB]
02-回顾.wmv [14.5 MB]
15-PCB设计进阶-铺铜策略和热管理.wmv [12.8 MB]
03-PCB设计进阶-工程介绍和新建.wmv [64.0 MB]
07-PCB设计进阶-添加LED和电阻以及批量修改位号.wmv [58.2 MB]
11-PCB设计进阶-布线.wmv [114.1 MB]
17-PCB设计高级技巧-盲埋孔.wmv [75.0 MB]
06-PCB设计进阶-批量扇出网络标签.wmv [17.4 MB]
05-PCB设计进阶-38译码器介绍.wmv [27.3 MB]
📁 效果图
01-38译码器和245驱动器.png [147.7 KB]
0202-51核心板底面.png [75.4 KB]
0201-51核心板顶面.png [100.6 KB]
元器件选型.txt [1.4 KB]
嵌入式原理图与PCB制作-课堂笔记.md [4.9 KB]
📁 18_智能网关项目
📁 1.课件
1.课件资料.png [493.5 KB]
尚硅谷嵌入式项目之智能网关 4.0.0.docx [12.8 MB]
📁 2.资料
📁 llcom
📁 logs
log20250222.txt [442.0 B]
📁 user_script_send_convert
GPS NMEA.lua [325.0 B]
解析换行回车的转义字符.lua [82.0 B]
16进制数据.lua [110.0 B]
default.lua [272.0 B]
checksum.lua [434.0 B]
加上换行回车.lua [56.0 B]
📁 core_script
log.lua [3.0 KB]
head.lua [3.6 KB]
strings.lua [4.4 KB]
JSON.lua [61.6 KB]
sys.lua [10.7 KB]
📁 user_script_recv_convert
绘制曲线-解析结构体.lua [807.0 B]
绘制曲线.lua [332.0 B]
default.lua [272.0 B]
绘制曲线-多条.lua [676.0 B]
📁 user_script_run
AT控制TCP连接-慢发模式.lua [2.0 KB]
channel-demo.lua [1.7 KB]
AT控制TCP连接-快发模式.lua [2.0 KB]
循环发送快捷发送区数据.lua [1.0 KB]
example.lua [1.0 KB]
llcom.exe [4.1 MB]
LICENSE [26.8 KB]
libusb-1.0 [157.5 KB]
反馈网址.txt [155.0 B]
settings.json [2.3 KB]
📁 simple-http-server
📁 simple-http-server
📁 download
gateway [57.3 KB]
x86_64-pc-windows-msvc-simple-http-server.exe [2.0 MB]
fileinfo.json [163.0 B]
📁 log.c-master
📁 log.c-master
📁 src
log.c [3.8 KB]
log.h [1.4 KB]
README.md [2.7 KB]
LICENSE [1.0 KB]
📁 编译烧录工具
Bluetooth_Node.zip [10.0 MB]
📁 cJSON-master
📁 cJSON-master
📁 tests
📁 json-patch-tests
README.md [2.3 KB]
package.json [393.0 B]
cjson-utils-tests.json [2.6 KB]
tests.json [16.8 KB]
.npmignore [25.0 B]
📁 inputs
test9.expected [34.0 B]
test11 [149.0 B]
test2.expected [268.0 B]
test8 [247.0 B]
test5.expected [900.0 B]
test1 [583.0 B]
test4.expected [3.2 KB]
test6 [484.0 B]
test3.expected [505.0 B]
test7 [399.0 B]
📁 unity
📁 docs
UnityGettingStartedGuide.md [8.1 KB]
license.txt [1.1 KB]
ThrowTheSwitchCodingStandard.md [7.9 KB]
UnityHelperScriptsGuide.md [9.1 KB]
📁 release
version.info [7.0 B]
📁 test
📁 tests
testunity.c [120.7 KB]
testparameterized.c [3.4 KB]
📁 testdata
Defs.h [96.0 B]
cmock.h [452.0 B]
testRunnerGeneratorSmall.c [1.3 KB]
testRunnerGenerator.c [5.0 KB]
mockMock.h [291.0 B]
testRunnerGeneratorWithMocks.c [5.7 KB]
📁 spec
📁 targets
iar_cortexm3_v5.yml [1.9 KB]
clang_strict.yml [1.5 KB]
iar_msp430.yml [2.2 KB]
gcc_auto_stdint.yml [1.1 KB]
gcc_32.yml [917.0 B]
clang_file.yml [1.5 KB]
gcc_manual_math.yml [854.0 B]
iar_armcortex_LM3S9B92_v5_4.yml [2.2 KB]
📁 expectdata
testsample_mock_head1.c [1.5 KB]
testsample_mock_def.c [1.5 KB]
testsample_mock_cmd.c [1.6 KB]
testsample_new2.c [1.4 KB]
testsample_mock_yaml.c [1.8 KB]
testsample_head1.h [333.0 B]
testsample_mock_param.c [1.6 KB]
testsample_yaml.c [1.5 KB]
testsample_new1.c [1.5 KB]
testsample_def.c [1.2 KB]
testsample_cmd.c [1.4 KB]
testsample_mock_head1.h [267.0 B]
testsample_head1.c [1.2 KB]
.rubocop.yml [1.4 KB]
rakefile [3.0 KB]
📁 auto
stylize_as_junit.rb [7.5 KB]
test_file_filter.rb [766.0 B]
colour_reporter.rb [1.2 KB]
type_sanitizer.rb [201.0 B]
unity_test_summary.py [5.1 KB]
parse_output.rb [6.8 KB]
unity_to_junit.py [5.8 KB]
📁 src
unity_internals.h [67.9 KB]
unity.c [48.3 KB]
unity.h [64.9 KB]
📁 extras
📁 fixture
📁 test
📁 main
AllTests.c [653.0 B]
unity_output_Spy.h [628.0 B]
unity_fixture_TestRunner.c [2.5 KB]
unity_fixture_Test.c [14.1 KB]
template_fixture_tests.c [722.0 B]
unity_output_Spy.c [1.2 KB]
📁 src
unity_fixture_internals.h [1.5 KB]
unity_fixture.h [3.3 KB]
unity_fixture_malloc_overrides.h [1.8 KB]
unity_fixture.c [10.1 KB]
readme.txt [515.0 B]
rakefile.rb [1.1 KB]
📁 eclipse
error_parsers.txt [1.1 KB]
📁 examples
📁 example_1
📁 src
ProductionCode2.h [69.0 B]
ProductionCode.c [862.0 B]
ProductionCode2.c [335.0 B]
📁 test
📁 test_runners
TestProductionCode2_Runner.c [1.2 KB]
TestProductionCode2.c [567.0 B]
TestProductionCode.c [2.3 KB]
readme.txt [139.0 B]
makefile [2.2 KB]
📁 example_3
📁 src
📁 helper
UnityHelper.c [405.0 B]
UnityHelper.h [483.0 B]
📁 test
TestProductionCode.c [2.3 KB]
TestProductionCode2.c [565.0 B]
rakefile.rb [884.0 B]
📁 example_2
📁 src
ProductionCode2.c [331.0 B]
ProductionCode.c [847.0 B]
📁 test
📁 test_runners
TestProductionCode_Runner.c [700.0 B]
all_tests.c [221.0 B]
TestProductionCode2.c [664.0 B]
makefile [1.7 KB]
readme.txt [175.0 B]
unity_config.h [12.0 KB]
README.md [7.6 KB]
json_patch_tests.c [6.6 KB]
parse_array.c [4.9 KB]
cjson_add.c [12.5 KB]
old_utils_tests.c [7.6 KB]
readme_examples.c [6.7 KB]
parse_value.c [3.2 KB]
common.h [4.1 KB]
parse_with_opts.c [4.1 KB]
print_value.c [3.1 KB]
print_array.c [3.7 KB]
parse_string.c [4.6 KB]
misc_tests.c [28.6 KB]
misc_utils_tests.c [3.3 KB]
print_string.c [2.8 KB]
parse_examples.c [7.8 KB]
minify_tests.c [5.3 KB]
print_number.c [4.3 KB]
parse_object.c [5.4 KB]
print_object.c [4.1 KB]
CMakeLists.txt [4.4 KB]
parse_hex4.c [3.4 KB]
compare_tests.c [8.4 KB]
📁 fuzzing
📁 inputs
test7 [401.0 B]
test6 [487.0 B]
test5 [875.0 B]
test8 [249.0 B]
test10 [81.0 B]
test9 [52.0 B]
test1 [585.0 B]
cjson_read_fuzzer.c [1.7 KB]
afl.sh [192.0 B]
afl-prepare-linux.sh [153.0 B]
fuzz_main.c [992.0 B]
CMakeLists.txt [1.1 KB]
ossfuzz.sh [529.0 B]
📁 library_config
uninstall.cmake [728.0 B]
libcjson.pc.in [304.0 B]
SECURITY.md [713.0 B]
CMakeLists.txt [10.1 KB]
cJSON.c [76.6 KB]
test.c [7.5 KB]
appveyor.yml [2.2 KB]
CHANGELOG.md [24.5 KB]
cJSON.h [15.8 KB]
cJSON_Utils.h [3.8 KB]
CONTRIBUTORS.md [3.8 KB]
Makefile [4.5 KB]
cJSON_Utils.c [39.8 KB]
README.md [27.0 KB]
Linux内核开发termios详解.pdf [288.1 KB]
mosquitto-2.0.18-install-windows-x64.exe [24.7 MB]
JDY-24M超级蓝牙模块手册.doc [853.4 KB]
phone_client.html [2.8 KB]
ASCII.png [244.2 KB]
simple-http-server.zip [867.1 KB]
📁 3.笔记和代码
笔记_智能网关.md [30.7 KB]
📁 4.视频
📁 day02
21_编码测试mqtt服务器.mp4 [113.9 MB]
14_消息模块_分析.mp4 [49.8 MB]
19_消息模块_测试.mp4 [47.2 MB]
17_消息模块_json消息转字符数组消息.mp4 [58.5 MB]
25_创建线程_等待子线程结束.mp4 [78.9 MB]
13_复习.mp4 [33.2 MB]
23_mqtt模块_测试.mp4 [36.1 MB]
20_安装mqtt服务器_com工具测试.mp4 [115.4 MB]
22_mqtt模块_实现.mp4 [120.8 MB]
24_理解线程.mp4 [70.9 MB]
18_消息模块_字符数组与十六进制字符串相互转换.mp4 [88.4 MB]
16_消息模块_字符数组消息转json消息.mp4 [55.5 MB]
15_消息模块_头文件.mp4 [33.3 MB]
📁 day01
02_相关概念.mp4 [45.1 MB]
10_cJSON库使用和测试.mp4 [111.7 MB]
11_debug调试.mp4 [48.7 MB]
09_include path配置.mp4 [29.0 MB]
05_使用git管理项目.mp4 [139.1 MB]
04_创建项目的基本目录结构.mp4 [16.6 MB]
08_log库使用和测试.mp4 [68.0 MB]
01_理解智能网关项目.mp4 [76.1 MB]
06_make基本使用.mp4 [88.9 MB]
07_make的相关语法.mp4 [136.9 MB]
03_搭建开发环境.mp4 [70.0 MB]
12_通用工具模块.mp4 [88.8 MB]
📁 day03
28_结束当前线程_取消其它线程.mp4 [47.5 MB]
26_复习.mp4 [56.8 MB]
30_消息队列.mp4 [129.8 MB]
36_标准输出重定向.mp4 [115.5 MB]
35_io系统调用.mp4 [121.9 MB]
32_线程池模块_头文件.mp4 [60.5 MB]
34_线程池模块_测试.mp4 [82.4 MB]
31_git从https切换到ssh.mp4 [52.0 MB]
29_竞态条件_互斥锁.mp4 [77.3 MB]
27_多线程的优势.mp4 [68.1 MB]
33_线程池模块_实现.mp4 [67.6 MB]
📁 01_嵌入式技术之C语言
📁 2.资料
📁 1.安装包
📁 XMind
XMind破解补丁.zip [5.7 MB]
Xmind-for-Windows-x64bit-24.04.10311-202405232355.exe [158.0 MB]
📁 FastStoneCapture
FastStoneCapture9.3.0.exe [4.2 MB]
注册码.txt [216.0 B]
typora-setup-x64_0.9.78.exe [52.8 MB]
VSCodeUserSetup-x64-1.92.2.exe [95.7 MB]
YoudaoDict_fanyiweb_navigation.exe [98.6 MB]
金山打字通.exe [23.4 MB]
draw.io-24.7.5-windows-installer.exe [102.7 MB]
Snipaste-2.9.2-Beta-x64.zip [18.1 MB]
VSCodeUserSetup-x64-1.70.2(适用于win7系统).exe [79.0 MB]
📁 3.电子书
C Primer Plus(第六版)中文版.pdf [21.6 MB]
📁 2.VS Code 扩展
ms-vscode.cpptools-1.21.0@win32-x64.vsix [81.7 MB]
MS-CEINTL.vscode-language-pack-zh-hans-1.93.2024090409.vsix [407.0 KB]
ms-vscode.cpptools-1.22.2@win32-x64.vsix [86.7 MB]
📁 3.视频
📁 Day01
14-C语言代码格式和缩进.wmv [10.7 MB]
04-C语言开发环境搭建-Mingw安装.wmv [44.4 MB]
08-程序基本结构.wmv [12.9 MB]
06-VSCode配置-安装C扩展.wmv [25.1 MB]
02-C语言介绍.wmv [72.2 MB]
09-C语言运行机制流程.wmv [35.8 MB]
15-变量的定义.wmv [40.4 MB]
07-年轻人的第一个C程序.wmv [17.8 MB]
05-C语言开发环境搭建-VSCode安装.wmv [6.0 MB]
03-C语言常见开发工具.wmv [24.2 MB]
16-变量的输出和输入.wmv [35.6 MB]
番外01-markdown语法规则.wmv [29.5 MB]
10-C语言运行机制流程演示.wmv [33.3 MB]
01-编程语言介绍.wmv [77.7 MB]
17-标识符命名规范.wmv [29.0 MB]
12-注释.wmv [27.0 MB]
11-C程序开发注意事项.wmv [18.8 MB]
13-C语言输出内容.wmv [5.9 MB]
📁 Day10
16-C语言数据类型总结.wmv [8.2 MB]
01-每日一考讲解.wmv [16.5 MB]
12-指针常量和常量指针.wmv [66.4 MB]
10-函数指针.wmv [32.5 MB]
15-野指针.wmv [7.8 MB]
14-空指针.wmv [17.9 MB]
17-枚举类型和枚举常量的语法.wmv [78.3 MB]
07-作业讲解05-字符大小写转换的函数.wmv [29.6 MB]
18-定义枚举变量的三种方式.wmv [22.6 MB]
02-回顾.wmv [8.8 MB]
09-指针函数.wmv [32.0 MB]
04-作业讲解02-计算数组平均值的函数.wmv [9.5 MB]
06-作业讲解04-字符在字符串中出现的位置的函数.wmv [19.8 MB]
03-作业讲解01-交换两个变量的值.wmv [12.1 MB]
08-函数传参-值传递和指针传递.wmv [38.8 MB]
11-回调函数.wmv [40.9 MB]
13-多级指针.wmv [43.3 MB]
05-作业讲解03-统计字符次数的函数.wmv [17.7 MB]
📁 Day11
10-结构体存储大小的计算规则01.wmv [34.7 MB]
06-数组元素是结构体类型.wmv [13.7 MB]
03-指向枚举变量的指针.wmv [5.9 MB]
05-结构体基本语法.wmv [67.4 MB]
01-每日一考讲解.wmv [20.5 MB]
12-共用体.wmv [64.2 MB]
02-指针总结.wmv [14.8 MB]
08-结构体应用案例.wmv [46.9 MB]
04-指针和二维数组.wmv [24.3 MB]
11-结构体存储大小的计算规则02.wmv [63.8 MB]
09-结构体变量和结构体类型的关系.wmv [8.3 MB]
15-typedef类型别名-结构体共用体枚举.wmv [32.2 MB]
13-typedef类型别名与宏定义类型别名的区别.wmv [35.9 MB]
07-结构体指针.wmv [20.9 MB]
14-typedef类型别名-数组函数指针.wmv [36.2 MB]
📁 Day09
04-指针基础.wmv [39.6 MB]
12-指针数组.wmv [31.5 MB]
03-变量的访问方式和内存地址.wmv [28.2 MB]
10-指针运算-指针比较大小.wmv [9.8 MB]
06-指针应用案例02.wmv [12.0 MB]
番外-流程图绘制软件介绍.wmv [24.9 MB]
13-数组名-首元素指针-数组指针对比总结.wmv [9.0 MB]
14-数组指针.wmv [34.4 MB]
01-每日一考回顾.wmv [24.6 MB]
15-字符指针.wmv [75.1 MB]
02-案例讲解-猴子吃桃.wmv [18.6 MB]
09-指针运算-同类型指针相减.wmv [15.9 MB]
11-指针和数组-数组名.wmv [77.2 MB]
07-指针运算-指针加减整数.wmv [23.6 MB]
08-指针运算-指针自增自减.wmv [27.4 MB]
05-指针应用案例01.wmv [22.2 MB]
📁 Day08
09-多文件编译.wmv [15.9 MB]
12-作用域和静态变量总结.wmv [4.1 MB]
17-标准库函数-字符串相关函数01.wmv [45.7 MB]
18-标准库函数-字符串相关函数02-sprintf.wmv [17.7 MB]
16-递归函数案例-计算指定位置的斐波那契数.wmv [18.5 MB]
08-静态局部变量.wmv [33.0 MB]
05-作业讲解-质数判断.wmv [7.1 MB]
03-作用域练习01.wmv [8.5 MB]
04-作用域练习02.wmv [9.3 MB]
11-static-静态全局变量和静态函数.wmv [29.4 MB]
15-递归函数案例-计算指定数字阶乘.wmv [15.2 MB]
06-作业讲解-计算数组元素和.wmv [30.6 MB]
14-递归调用和内存调用堆栈的关系.wmv [21.2 MB]
10-extern声明外部变量.wmv [21.9 MB]
01-每日一考题目讲解.wmv [9.9 MB]
13-递归函数的概念.wmv [54.1 MB]
07-作业讲解-判断是否是闰年.wmv [6.5 MB]
19-标准库函数-字符串相关函数02-sscanf.wmv [16.9 MB]
📁 Day07
20-全局作用域.wmv [25.7 MB]
07-作业讲解-循环数字阵列02.wmv [3.8 MB]
11-函数的四要素.wmv [14.5 MB]
05-作业讲解-二维数组保存多个字符串.wmv [5.3 MB]
09-作业讲解-循环打印图像02.wmv [14.2 MB]
03-作业讲解-获取最小元素的下标.wmv [8.4 MB]
14-返回值.wmv [25.7 MB]
08-作业讲解-循环打印图像01.wmv [12.4 MB]
06-作业讲解-循环数字阵列01.wmv [8.1 MB]
10-C语言函数的概念和分类.wmv [20.4 MB]
19-作用域的概念.wmv [9.4 MB]
23-块级作用域和标识符的查找过程.wmv [32.3 MB]
25-作用域和内存-标识符声明周期.wmv [12.5 MB]
01-回顾.wmv [9.5 MB]
17-主函数-参数.wmv [37.6 MB]
16-主函数-返回值.wmv [14.9 MB]
18-函数原型.wmv [20.3 MB]
15-参数.wmv [23.6 MB]
24-作用域和内存-不同内存区域.wmv [15.1 MB]
22-全局和局部作用域有同名标识符.wmv [16.5 MB]
21-局部作用域.wmv [30.9 MB]
13-函数名的数据类型.wmv [8.3 MB]
04-作业讲解-使用单层循环遍历二维数组.wmv [11.6 MB]
12-函数的定义和调用.wmv [57.0 MB]
02-作业讲解-26个字母存入数组.wmv [21.6 MB]
📁 day06
11-数组操作-计算数组长度.wmv [12.3 MB]
13-C99标准数组新特性-可变长度数组.wmv [23.8 MB]
02-回顾.wmv [8.2 MB]
12-数组操作-遍历数组.wmv [16.7 MB]
19-定义字符串-简写方式初始化赋值.wmv [11.9 MB]
17-字符串的概念.wmv [11.9 MB]
07-作业讲解-累加案例.wmv [12.9 MB]
21-多维数组的概念.wmv [10.0 MB]
08-数组的概念.wmv [27.7 MB]
18-定义字符串-普通方式初始化赋值.wmv [45.2 MB]
04-作业讲解-判断一个数字是否是质数.wmv [24.8 MB]
16-数组应用案例02-取最大元素.wmv [11.0 MB]
23-二维数组的访问和遍历.wmv [29.9 MB]
03-作业讲解-循环输入多个数字并计算它们的平均数.wmv [13.3 MB]
14-C99标准数组新特性-数组字面量.wmv [9.8 MB]
09-如何定义数组.wmv [30.0 MB]
10-数组操作-访问指定位置的元素好数组访问越界.wmv [14.6 MB]
22-定义二维数组.wmv [19.2 MB]
20-字符串的访问和遍历.wmv [20.4 MB]
01-每日一考讲解.wmv [8.9 MB]
05-作业讲解-打印100以内所有的质数.wmv [8.7 MB]
24-二维数组在内存中连续存储.wmv [7.1 MB]
15-数组应用案例01.wmv [7.3 MB]
25-二维数组应用案例.wmv [39.1 MB]
06-作业讲解-循环打印连续的大小写字母.wmv [5.3 MB]
📁 Day13
03-IO概述.wmv [13.1 MB]
16-项目-删除客户-代码实现.wmv [49.6 MB]
05-读写终端-getchar和putchar.wmv [23.7 MB]
07-读写终端-fgets和scanf获取字符串的区别.wmv [14.2 MB]
10-文件读写-从文件中读取内容.wmv [36.9 MB]
01-每日一考讲解.wmv [12.5 MB]
18-项目-修改客户-实现修改.wmv [58.3 MB]
11-项目-主菜单.wmv [27.7 MB]
19-vscode内置终端的编码问题.wmv [43.0 MB]
04-缓冲区换行符残留对scanf获取字符的影响.wmv [33.6 MB]
08-文件读写概述.wmv [23.4 MB]
06-读写终端-gets和puts.wmv [30.5 MB]
09-文件读写-向文件写入内容.wmv [26.5 MB]
13-项目-添加客户-获取输入的信息.wmv [32.9 MB]
15-项目-删除客户-思路分析.wmv [10.0 MB]
12-项目-添加客户-结构体和数组的设计.wmv [19.1 MB]
17-项目-修改客户-修改界面.wmv [19.7 MB]
02-总结回顾.wmv [5.3 MB]
14-项目-客户列表.wmv [19.6 MB]
📁 day05
16-实现第二种形式的九九乘法表.wmv [15.9 MB]
03-作业讲解-闰年平年判断.wmv [35.4 MB]
13-多重循环示例.wmv [16.8 MB]
12-for循环-实现非计数循环和死循环.wmv [38.0 MB]
22-goto语句.wmv [16.2 MB]
18-实现第四种形式的九九乘法表.wmv [19.9 MB]
06-while循环-实现计数循环.wmv [49.8 MB]
08-do while循环-计数循环.wmv [35.6 MB]
11-for循环-实现计数循环.wmv [31.9 MB]
07-while循环-实现非计数循环.wmv [13.9 MB]
20-break应用案例.wmv [22.0 MB]
19-跳转控制语句-break和continue.wmv [14.9 MB]
02-回顾总结.wmv [11.7 MB]
05-while循环-实现死循环.wmv [16.4 MB]
15-实现第一种形式的九九乘法表.wmv [32.7 MB]
04-作业讲解-水仙花数.wmv [7.1 MB]
23-循环和分支省略大括号的语法.wmv [7.3 MB]
17-实现第三种形式的九九乘法表.wmv [22.5 MB]
14-断点调试的使用.wmv [21.5 MB]
09-do while循环-非计数循环.wmv [7.7 MB]
01-每日一考讲解.wmv [13.6 MB]
21-continue应用案例.wmv [7.7 MB]
10-while和do while 的区别.wmv [9.3 MB]
📁 day03
12-算术运算符-正号负号和取余.wmv [21.7 MB]
番外-VS Code配置-配置文件保存位置.wmv [7.5 MB]
番外-VS Code配置-常用快捷键.wmv [16.2 MB]
10-强制类型转换.wmv [19.8 MB]
03-有符号整数和无符号整数.wmv [24.0 MB]
番外-软件推荐-截图软件.wmv [15.3 MB]
09-自动类型转换-赋值过程的自动类型转换.wmv [33.0 MB]
番外-软件推荐-有道翻译.wmv [20.1 MB]
04-数据类型-字符类型的字面量表示方式.wmv [28.0 MB]
08-自动类型转换-运算过程的自动类型转换.wmv [42.1 MB]
02-回顾.wmv [6.8 MB]
06-数据类型-布尔类型.wmv [52.3 MB]
15-逻辑运算符.wmv [41.7 MB]
14-关系运算符.wmv [19.4 MB]
13-算术运算符-自增自减.wmv [47.4 MB]
11-运算符概述.wmv [27.6 MB]
07-数据类型-sizeof的使用.wmv [38.4 MB]
番外02-typora使用演示.wmv [30.4 MB]
01-每日一考讲解.wmv [22.5 MB]
番外-VS Code配置-用户代码片段.wmv [17.6 MB]
05-数据类型-字符类型的占位符和字符类型的本质.wmv [55.7 MB]
📁 day04
07-位运算符-按位左移按位右移.wmv [35.9 MB]
14-成绩判断案例-else if多向分支实现.wmv [14.8 MB]
16-switch case 结构中 break 的作用.wmv [22.5 MB]
06-位运算符-按位取反.wmv [17.6 MB]
12-成绩判断案例-单向分支实现.wmv [26.8 MB]
04-作业讲解01-计算百位十位个位上的数.wmv [20.1 MB]
09-三元运算符.wmv [30.3 MB]
18-加油案例-switch case 实现.wmv [22.8 MB]
08-赋值运算符.wmv [22.0 MB]
01-每日一考讲解.wmv [10.4 MB]
15-switch case语法结构和生肖判断案例.wmv [50.5 MB]
19-加油案例-elseif 实现.wmv [7.9 MB]
05-位运算符-按位与按位或按位异或.wmv [30.6 MB]
03-作业讲解01-容量单位转换案例.wmv [13.4 MB]
13-成绩判断案例-双向分支加嵌套结构实现.wmv [26.5 MB]
02-运算符总结回顾.wmv [7.6 MB]
11-运算符优先级.wmv [29.9 MB]
10-逗号运算符.wmv [12.3 MB]
📁 Day02
03-作业讲解01-计算两个数的和.wmv [7.8 MB]
07-不同进制的打印占位符.wmv [7.5 MB]
01-每日一考讲解.wmv [7.0 MB]
09-进制转换-二进制和十进制-8421方法.wmv [17.4 MB]
06-整数字面量的不同进制表示.wmv [7.7 MB]
12-进制转换-工具的使用.wmv [8.0 MB]
08-进制转换-二进制和十进制-标准方法.wmv [11.7 MB]
19-C语言整数类型-精确宽度类型.wmv [18.8 MB]
02-回顾.wmv [4.2 MB]
04-作业讲解01-交换两个变量的值.wmv [13.9 MB]
15-C语言数据类型划分.wmv [21.9 MB]
16-C语言整数类型的划分.wmv [40.9 MB]
22-C语言浮点类型-占位符.wmv [20.3 MB]
10-进制转换-十六进制和十进制.wmv [8.6 MB]
05-常量.wmv [50.1 MB]
13-原码反码补码.wmv [19.9 MB]
11-进制转换-十六进制和二进制.wmv [6.4 MB]
18-C语言整数类型-格式占位符.wmv [17.9 MB]
23-C语言浮点类型-浮点数存储原理.wmv [24.6 MB]
17-C语言整数类型-字面量后缀.wmv [13.2 MB]
14-计算机为什么使用补码.wmv [44.7 MB]
20-C语言浮点类型划分.wmv [34.4 MB]
21-C语言浮点类型-字面量表示.wmv [15.2 MB]
📁 Day12
18-条件编译应用案例-根据操作系统不同包含不同头文件.wmv [34.1 MB]
15-包含自定义头文件-绝对路径.wmv [17.8 MB]
02-回顾.wmv [5.6 MB]
01-每日一考讲解.wmv [15.0 MB]
16-条件编译和分支结构区别.wmv [17.8 MB]
17-条件编译所涉及预处理器总结.wmv [9.4 MB]
10-内存泄漏和内存溢出.wmv [7.4 MB]
19-条件编译应用案例-解决头文件重复包含问题.wmv [26.3 MB]
07-动态内存分配-存储结构体变量.wmv [12.6 MB]
12-宏定义.wmv [74.2 MB]
04-C语言内存模型.wmv [17.1 MB]
14-包含自定义头文件-相对路径.wmv [47.6 MB]
06-动态内存分配操作步骤.wmv [31.2 MB]
03-作业讲解-综合案例-枚举结构体共同体typedef.wmv [93.6 MB]
11-预处理指令介绍.wmv [14.5 MB]
13-带参数的宏定义.wmv [34.2 MB]
05-void指针.wmv [37.4 MB]
09-动态内存分配-calloc.wmv [9.9 MB]
08-动态内存分配-存储数组.wmv [7.6 MB]
1.笔记.zip [36.5 MB]
01Code.zip [1.0 MB]
知识付费共建共享.url [122.0 B]
4.课堂笔记.zip [143.2 KB]
📁 03_嵌入式技术之硬件电路基础
📁 每日一考
嵌入式之硬件电路基础-Day02每日一考.md [1.4 KB]
01-02.png [162.7 KB]
02-01.png [3.0 KB]
嵌入式之硬件电路基础-Day01每日一考.md [1.6 KB]
01-03.png [26.3 KB]
01-01.png [533.1 KB]
📁 01.笔记
尚硅谷嵌入式技术之硬件电路基础1.6.0.docx [75.0 MB]
尚硅谷嵌入式技术之硬件参数常用英文.docx [290.3 KB]
尚硅谷嵌入式技术之CircuitJS仿真软件.docx [553.8 KB]
📁 04.视频
📁 Day02
14-典型电路-光敏电阻.wmv [12.0 MB]
13-半导体器件-MOS管.wmv [39.8 MB]
15-典型电路-压敏电阻.wmv [10.5 MB]
06-常见元器件-电源.wmv [108.7 MB]
00-万用表-测电流.wmv [18.7 MB]
08-万用表-测电压.wmv [17.6 MB]
07-万用表-测电阻.wmv [55.3 MB]
09-万用表-测通断.wmv [62.1 MB]
18-典型电路-上拉电阻和下拉电阻.wmv [88.8 MB]
10-模拟电路概述.wmv [8.9 MB]
16-典型电路-0欧姆电阻.wmv [53.4 MB]
17-典型电路-限流电阻.wmv [19.9 MB]
19-典型电路-电容应用.wmv [9.6 MB]
05-常见元器件-蜂鸣器.wmv [22.1 MB]
02-常见元器件-继电器.wmv [139.2 MB]
04-常见元器件-接插件.wmv [161.4 MB]
12-半导体器件-三极管.wmv [66.2 MB]
11-半导体器件-二极管.wmv [101.5 MB]
03-常见元器件-保险丝.wmv [44.6 MB]
📁 Day01
03-电学基础-电压.wmv [24.5 MB]
13-电路练01.wmv [7.3 MB]
05-电学基础-电路.wmv [29.8 MB]
07-电学基础-安全电压以及强电弱电.wmv [14.3 MB]
16-面包板介绍.wmv [18.7 MB]
18-常见电阻器-固定电阻.wmv [146.0 MB]
19-常见电阻器-可变电阻和特种电阻.wmv [71.3 MB]
23-电容器-特性和作用.wmv [38.2 MB]
02-电学基础-电流.wmv [55.8 MB]
11-串联电路.wmv [8.7 MB]
12-并联电路.wmv [13.2 MB]
26-电感器.wmv [46.6 MB]
21-电阻总结.wmv [8.3 MB]
25-电容器-容量识别.wmv [23.8 MB]
20-电阻器阻值识别.wmv [74.1 MB]
09-电学定律-功率计算.wmv [8.6 MB]
14-电路练02.wmv [6.9 MB]
10-电学定律-焦耳定律.wmv [66.4 MB]
15-仿真软件circuit.wmv [68.4 MB]
08-电学定律-欧姆定律.wmv [20.7 MB]
01-每日一考讲解.wmv [8.0 MB]
04-电学基础-电阻.wmv [27.6 MB]
22-电容器-概念.wmv [34.1 MB]
24-电容器-常见电容器.wmv [76.9 MB]
06-电学基础-直流电和交流电.wmv [55.2 MB]
17-元器件分类.wmv [58.1 MB]
📁 02.资料
📁 1.安装包
circuitjs1-win.zip [76.0 MB]
📁 4.其他
电磁继电器制作的计算机.mp4 [6.1 MB]
元素周期表.pdf [638.0 KB]
📁 2.演示电路
📁 电感
01-电感-储能 [443.0 B]
02-电感-通直隔交 [1.1 KB]
📁 保险丝
02-保险丝-过载保护 [937.0 B]
01-保险丝-短路熔断 [548.0 B]
📁 继电器
01-继电器 [535.0 B]
02-继电器-电报原型 [404.0 B]
📁 电容
03-电容-容量不同容抗对比 [757.0 B]
02-电容-隔直-通交 [667.0 B]
04-电容-不同频率容抗对比 [738.0 B]
01-电容-可以存储电荷 [595.0 B]
📁 电阻
01-电阻-限流 [1014.0 B]
📁 串并联电路题目
电路1.png [15.3 KB]
电路4.png [22.3 KB]
03-电路03 [528.0 B]
04-电路04 [451.0 B]
电路2.png [18.5 KB]
02-电路02 [368.0 B]
01-电路01 [279.0 B]
电路3.png [26.5 KB]
光感灯 [529.0 B]
三极管 [1.1 KB]
三极管-改进 [1.5 KB]
增强场效应管 [904.0 B]
📁 3.电子书
人教版九年级物理全一册.pdf [14.0 MB]
嵌入式之硬件电路基础-课堂笔记.md [8.4 KB]
📁 06_嵌入式技术之51单片机
📁 1.笔记
尚硅谷嵌入式技术之51单片机2.1.0.docx [112.6 MB]
📁 2.资料
📁 01_芯片手册
DS18B20.pdf [1.2 MB]
74HC138N.pdf [1.4 MB]
74HC245N.pdf [1.7 MB]
74HC595N.pdf [1.1 MB]
共阴数码管.pdf [506.3 KB]
STC89C51RC-RD.pdf [15.6 MB]
STC89C52.pdf [16.1 MB]
点阵LED.pdf [304.7 KB]
OLED手册.pdf [1.7 MB]
SSD1315.pdf [721.3 KB]
STC89C52.docx [17.7 MB]
AT24C02CN.pdf [2.8 MB]
📁 11_OLED取模软件
notice.txt [2.1 KB]
PCtoLCD2002.exe [303.0 KB]
ASC.PTL [130.0 B]
_index.TXT [7.0 B]
VCL60.BPL [1.3 MB]
readme2002.txt [4.3 KB]
PCtoLCD2002.INI [362.0 B]
📁 03_isp程序下载工具
📁 stc-isp-15xx-v6.94H
STC-USB驱动安装说明.pdf [813.6 KB]
不需要看,不常用的64位系统关闭数字签名的方法.pdf [1.3 MB]
stc-isp-15xx-v6.94H.zip [5.5 MB]
CH341SER.EXE [642.8 KB]
CH341SER.ZIP [553.7 KB]
📁 07_pdf阅读器&翻译软件
金山词霸.exe [90.2 MB]
有道翻译.exe [98.6 MB]
pdfgear_setup_v2.1.4.exe [128.4 MB]
SEM09_Editor_FoxitInst.exe [186.9 MB]
📁 09_Python
Vocode烧录配置.txt [189.0 B]
python-3.12.5-amd64.exe [25.3 MB]
📁 10_点阵屏取模软件
📁 8X8dzqmrj
8X8点阵取模软件.exe [1.8 MB]
8X8点阵取模软件.exe [1.8 MB]
Readme-ZOL.htm [2.8 KB]
📁 08_所有例程hex文件
13-串口-单字节命令.hex [785.0 B]
18-DS1302.hex [11.7 KB]
02-闪烁led.hex [199.0 B]
10-按键控制LED亮灭（外部中断版）.hex [234.0 B]
04-静态数码管显示.hex [1.7 KB]
08-矩阵按键.hex [2.9 KB]
09-蜂鸣器.hex [3.0 KB]
07-独立按键.hex [723.0 B]
16-OLED.hex [1.9 KB]
15-EEPROM.hex [2.4 KB]
17-18B20.hex [7.6 KB]
11-闪烁LED（定时器中断版）.hex [384.0 B]
12-点阵LED.hex [2.5 KB]
01-点亮led.hex [90.0 B]
14-串口-多字节命令.hex [3.5 KB]
05-动态数码管显示.hex [1.7 KB]
03-流水灯.hex [242.0 B]
📁 02_51_keil
C51V961.EXE [104.8 MB]
📁 04_VScode环境准备
📁 VScode安装
mingw64.zip [184.5 MB]
VSCodeUserSetup-x64-1.85.0.exe [90.4 MB]
📁 插件
CL.eide-3.13.2023061101.vsix [13.8 MB]
ms-vscode.cmake-tools-1.17.1.vsix [1.8 MB]
ms-vscode.cpptools-1.19.0@win32-x64.vsix [83.2 MB]
twxs.cmake-0.0.17.vsix [7.7 MB]
cschlosser.doxdocgen-1.4.0.vsix [3.0 MB]
ms-vscode.cpptools-themes-2.0.0.vsix [233.0 KB]
📁 dotnet
dotnet-sdk-8.0.401-win-arm64.exe [191.8 MB]
dotnet-sdk-8.0.401-win-x64.exe [210.0 MB]
dotnet-runtime-6.0.25-win-x64.exe [26.8 MB]
单片机开发.code-profile [28.8 KB]
test_89c52.ept [12.3 KB]
.eide.zip [253.6 MB]
📁 05_逻辑分析仪
📁 Saleae-Logic-Drivers
📁 Drivers
📁 x86
WinUSBCoInstaller.dll [567.6 KB]
WUDFUpdate_01007.dll [1.2 MB]
WdfCoInstaller01007.dll [1.1 MB]
📁 amd64
WUDFUpdate_01007.dll [1.5 MB]
WinUSBCoInstaller.dll [691.6 KB]
WdfCoInstaller01007.dll [1.4 MB]
Saleae.inf [5.5 KB]
saleaecatalogfile.cat [11.3 KB]
Logic-2.4.10-windows-x64.exe [191.4 MB]
Logic-2.4.14-windows-x64.exe [208.0 MB]
📁 06_原理图
📁 扩展板
51教学扩展板V1.0_新原理图.pdf [681.8 KB]
51教学扩展版V1.0_0..png [713.9 KB]
51教学扩展版V1.0_2024-05-20.pdf [1.3 MB]
51教学扩展版V1.0_1..png [404.4 KB]
📁 核心板
核心板V1.0_2024-05-20_1.png [377.9 KB]
SCH_51教学核心版V1.0_2024-05-20.pdf [583.5 KB]
核心板V1.0_2024-05-20.png [550.6 KB]
📁 4.视频
📁 Day07
19-EEPROM代码实现-写操作-写入多页数据.wmv [25.1 MB]
05-IIC驱动程序编写-总体分析.wmv [7.2 MB]
08-IIC驱动程序编写-发送一个字节的数据.wmv [21.8 MB]
20-EEPROM代码实现-读操作.wmv [37.7 MB]
03-IIC协议概述.wmv [42.1 MB]
10-IIC驱动程序编写-接收一个字节的数据.wmv [20.5 MB]
04-IIC完整通信流程.wmv [26.5 MB]
01-每日一考讲解.wmv [12.6 MB]
07-IIC驱动程序编写-发送起始信号.wmv [6.8 MB]
11-IIC驱动程序编写-发送ACK信号.wmv [6.2 MB]
13-IIC驱动程序编写-验证调试.wmv [18.8 MB]
12-IIC驱动程序编写-发送停止信号.wmv [4.8 MB]
06-IIC驱动程序编写-定义函数原型.wmv [17.0 MB]
09-IIC驱动程序编写-接收ACK信号.wmv [17.5 MB]
17-EEPROM读操作分析.wmv [29.2 MB]
15-EEPROM概述和存储结构.wmv [36.0 MB]
18-EEPROM代码实现-写操作-写入一页数据.wmv [60.2 MB]
16-EEPROM写操作分析.wmv [28.8 MB]
02-回顾.wmv [22.2 MB]
21-EEPROM代码实现-写完一页后的延时.wmv [9.8 MB]
22-EEPROM代码实现-调试验证.wmv [31.0 MB]
📁 Day01
08-快速入门项目点亮LED-代码分析.wmv [21.0 MB]
06-快速入门项目点亮LED-项目创建和代码编写.wmv [68.9 MB]
12-VSCode烧录配置.wmv [21.6 MB]
10-流水灯项目.wmv [68.5 MB]
09-LED闪烁项目.wmv [77.9 MB]
03-开发环境安装01.wmv [36.3 MB]
02-单片机开发环境介绍.wmv [32.4 MB]
13-利用已有项目新建新项目.wmv [10.6 MB]
01-51单片机的概述.wmv [83.2 MB]
07-快速入门项目点亮LED-程序烧录.wmv [35.8 MB]
05-开发环境安装03.wmv [13.1 MB]
04-开发环境安装02.wmv [27.6 MB]
11-将VSCode配置成嵌入式开发环境.wmv [64.2 MB]
📁 Day02
07-数码管案例-代码实现02.wmv [91.1 MB]
10-导出项目模版并使用项目模板创建项目.wmv [17.9 MB]
02-案例讲解-来回流水灯.wmv [42.9 MB]
05-数码管案例-软件分析.wmv [23.0 MB]
01-每日一考讲解.wmv [7.9 MB]
08-编码规范.wmv [31.9 MB]
04-数码管案例-硬件分析.wmv [66.6 MB]
09-动态数码管进行模块化改造.wmv [64.4 MB]
11-使用模块化编程实现数码管计数案例.wmv [69.1 MB]
03-数码管概述.wmv [39.2 MB]
06-数码管案例-代码实现.wmv [80.4 MB]
📁 Day08
07-SSD1315的GDDRAM-三种寻址方式.wmv [40.6 MB]
12-OLED模块代码实现-初始化函数.wmv [77.2 MB]
05-SSD1315的IIC总线使用流程.wmv [40.1 MB]
01-每日一考讲解.wmv [9.0 MB]
15-OLED模块代码实现-定义字模信息.wmv [47.2 MB]
02-回顾.wmv [17.8 MB]
04-SSD1315驱动芯片概述.wmv [52.7 MB]
10-OOLED字符的显示位置.wmv [5.4 MB]
13-OLED模块代码实现-清屏函数.wmv [47.1 MB]
17-OLED模块代码实现-指定位置写入指定数字.wmv [17.1 MB]
08-SSD1315的GDDRAM-内存的每个bit与屏幕的每个像素的对应关系.wmv [51.3 MB]
16-OLED模块代码实现-指定位置写入指定字符串.wmv [34.0 MB]
09-OOLED取模.wmv [44.4 MB]
11-OLED模块代码实现-封装发送数据字节的函数.wmv [45.0 MB]
03-OLED概述.wmv [30.4 MB]
06-SSD1315的GDDRAM-内存存储结构.wmv [44.3 MB]
14-OLED模块代码实现-设置页地址和列地址函数.wmv [23.0 MB]
📁 Day03
03-独立按键模块-代码实现.wmv [78.0 MB]
01-作业讲解-显示小数的数码管.wmv [117.5 MB]
09-蜂鸣器模块-提高占空比增大蜂鸣器声音.wmv [38.7 MB]
07-蜂鸣器模块-硬件设计.wmv [21.8 MB]
02-独立按键模块-硬件设计.wmv [30.6 MB]
10-作业介绍.wmv [50.5 MB]
08-蜂鸣器模块-代码实现.wmv [43.1 MB]
05-矩阵按键模块-硬件设计.wmv [42.8 MB]
04-独立按键模块-模块化封装.wmv [25.5 MB]
06-矩阵按键模块-代码实现.wmv [115.3 MB]
📁 Day04
09-外部中断案例-第一步-启用中断.wmv [51.9 MB]
20-定时器中断封装-总体设计.wmv [27.0 MB]
19-定时器中断总结.wmv [17.3 MB]
11-外部中断案例-第三步-设置外部中断优先级.wmv [33.0 MB]
01-每日一考讲解.wmv [8.1 MB]
08-中断优先级介绍.wmv [10.1 MB]
07-中断服务程序.wmv [14.8 MB]
06-中断源.wmv [37.4 MB]
22-定时器中断封装-注册回调函数和解除回调函数.wmv [19.4 MB]
16-定时器中断案例-使用步骤-第三步-计算脉冲计数器起始值.wmv [34.6 MB]
02-回顾总结.wmv [13.6 MB]
23-定时器中断封装-中断服务程序中调用回调函数.wmv [9.2 MB]
21-定时器中断封装-初始化.wmv [16.4 MB]
10-外部中断案例-第二步-设置外部中断触发方式.wmv [28.0 MB]
12-外部中断案例-第四步-定义中断服务程序.wmv [30.5 MB]
24-定时器中断封装-应用案例.wmv [23.9 MB]
13-定时器中断概述.wmv [26.6 MB]
17-定时器中断案例-使用步骤-第五步-开始计数.wmv [51.1 MB]
18-定时器中断案例-使用步骤-第六步-定义定时器中断服务程序.wmv [21.2 MB]
14-定时器中断案例-使用步骤-第一步-启动定时器.wmv [7.2 MB]
05-中断概述.wmv [25.3 MB]
03-作业讲解-按键计数.wmv [45.8 MB]
04-作业讲解-音乐按键.wmv [75.2 MB]
15-定时器中断案例-使用步骤-第二步-设置脉冲来源和工作模式.wmv [66.1 MB]
📁 Day06
14-逻辑分析仪的采样频率设置.wmv [3.4 MB]
08-51单片机UART使用步骤-串口中断服务程序.wmv [8.1 MB]
02-回顾.wmv [10.5 MB]
11-UART案例-代码实现-发送多字节数据.wmv [16.1 MB]
04-51单片机UART使用步骤-总体分析.wmv [21.8 MB]
01-每日一考回顾.wmv [11.4 MB]
12-UART多字节指令案例-代码实现-接收多字节数据.wmv [83.2 MB]
13-逻辑分析仪的使用.wmv [103.2 MB]
07-51单片机UART使用步骤-初始化-第三步接收相关配置.wmv [56.9 MB]
10-UART案例-代码实现-发送单字节数据.wmv [37.1 MB]
06-51单片机UART使用步骤-初始化-第二步设置波特率和配置定时器1.wmv [107.4 MB]
03-作业讲解-按键功能切换.wmv [58.5 MB]
08-51单片机UART使用步骤-初始化-第四步串口中断配置.wmv [6.0 MB]
05-51单片机UART使用步骤-初始化-第一步工作模式.wmv [27.0 MB]
09-UART案例-代码实现-接收单字节数据.wmv [63.9 MB]
📁 Day05
04-作业案例-定时器实现数码管.wmv [21.5 MB]
08-点阵屏案例-软件实现原理分析.wmv [11.0 MB]
02-回顾总结.wmv [21.8 MB]
03-作业案例-定时器实现流水灯.wmv [46.3 MB]
09-点阵屏静态显示案例-代码实现.wmv [95.0 MB]
10-点阵屏滚动显示-代码实现.wmv [136.2 MB]
14-UART协议介绍.wmv [63.0 MB]
05-点阵屏案例-8乘8点阵屏介绍.wmv [16.2 MB]
11-通信协议介绍-串口和并口.wmv [28.7 MB]
12-通信协议介绍-单工和双工.wmv [13.2 MB]
06-点阵屏案例-硬件电路设计.wmv [53.0 MB]
01-每日一考讲解.wmv [11.8 MB]
13-通信协议介绍-同步和异步.wmv [11.1 MB]
📁 Day09
08-1wire通信协议代码实现-发送一个字节的数据.wmv [15.8 MB]
12-18B20代码实现-获取浮点数数的温度.wmv [32.0 MB]
13-DS1302概述.wmv [39.4 MB]
06-1wire通信协议代码实现-初始化.wmv [38.8 MB]
16-DS1302寄存器介绍.wmv [65.3 MB]
10-18B20测温代码实现.wmv [109.9 MB]
14-DS1302通信协议概述.wmv [19.0 MB]
15-DS1302通信协议代码实现.wmv [26.0 MB]
04-1wire通信协议.wmv [41.3 MB]
07-1wire通信协议代码实现-写入一个字节的数据.wmv [33.8 MB]
11-18B20代码调试.wmv [40.5 MB]
03-18B20概述.wmv [13.0 MB]
05-18B20通信流程和项目创建.wmv [27.5 MB]
17-DS1302寄存器模块代码实现-向寄存器写入日期的函数.wmv [70.4 MB]
18-DS1302寄存器模块代码实现-读取寄存器中的日期的函数.wmv [32.2 MB]
02-回顾.wmv [16.0 MB]
01-每日一考.wmv [5.8 MB]
📁 作业效果
📁 课堂笔记
嵌入式之51单片机-Day01课堂笔记.md [3.3 KB]
嵌入式之51单片机-Day02课堂笔记.md [6.4 KB]
音乐七音.png [19.8 KB]
02-按键计数.hex [2.4 KB]
03-音乐按键.hex [3.6 KB]
📁 课堂笔记
嵌入式之51单片机-Day03课堂笔记.md [2.0 KB]
嵌入式之51单片机-Day06课堂笔记.md [5.1 KB]
嵌入式之51单片机-Day08课堂笔记.md [4.8 KB]
嵌入式之51单片机-Day04课堂笔记.md [7.6 KB]
嵌入式之51单片机-Day05课堂笔记.md [3.6 KB]
嵌入式之51单片机-Day01课堂笔记.md [3.3 KB]
嵌入式之51单片机-Day07课堂笔记.md [2.8 KB]
每日一考.zip [386.7 KB]
小黑板.txt [2.0 KB]
嵌入式之51单片机-Day09课堂笔记.md [3.1 KB]
思路分析表.xlsx [65.3 KB]
📁 15_嵌入式技术之蓝牙音箱
📁 02_资料
📁 03_杰理开发工具
2_2.5.0.exe [48.1 MB]
1_codeblocks-latest.exe [35.7 MB]
3_pkgman-offline-setup-20220318.exe [85.6 MB]
📁 01_原理图
SCH_Schematic1_2024-10-16.pdf [897.5 KB]
02_杰理SDK.zip [312.9 MB]
📁 01_笔记
蓝牙音箱临时方案.docx [613.9 KB]
尚硅谷嵌入式项目之智能蓝牙音箱1.1.0.docx [11.1 MB]
📁 04_视频
14_尚硅谷_蓝牙音箱（LED功能 需求分析）.mp4 [40.9 MB]
12_尚硅谷_蓝牙音箱（按键功能 添加IOKEY对应的文件）.mp4 [10.1 MB]
07_尚硅谷_蓝牙音箱（开发方式介绍）.mp4 [52.6 MB]
05_尚硅谷_蓝牙音箱（SDK下载）.mp4 [19.2 MB]
18_尚硅谷_蓝牙音箱（LED显示音乐时间功能 回调函数处理）.mp4 [62.2 MB]
01_尚硅谷_蓝牙音箱（课程介绍）.mp4 [70.6 MB]
21_尚硅谷_蓝牙音箱（LED显示音乐时间功能 思路整理）.mp4 [37.8 MB]
16_尚硅谷_蓝牙音箱（LED功能 灯组亮指定数字）.mp4 [80.1 MB]
10_尚硅谷_蓝牙音箱（按键功能 调整按键回调函数）.mp4 [12.6 MB]
15_尚硅谷_蓝牙音箱（LED功能 灯组切换逻辑处理）.mp4 [94.6 MB]
19_尚硅谷_蓝牙音箱（LED显示音乐时间功能 发送获取歌曲信息指令）.mp4 [108.3 MB]
11_尚硅谷_蓝牙音箱（按键功能 修改宏定义）.mp4 [18.7 MB]
13_尚硅谷_蓝牙音箱（按键功能 代码测试）.mp4 [49.9 MB]
课堂笔记.txt [1.1 KB]
08_尚硅谷_蓝牙音箱（按键功能 代码说明）.mp4 [120.9 MB]
09_尚硅谷_蓝牙音箱（按键功能 按键适配）.mp4 [111.6 MB]
02_尚硅谷_蓝牙音箱（项目需求）.mp4 [13.0 MB]
04_尚硅谷_蓝牙音箱（开发环境安装）.mp4 [34.0 MB]
03_尚硅谷_蓝牙音箱（硬件选型）.mp4 [15.3 MB]
20_尚硅谷_蓝牙音箱（LED显示音乐时间功能 代码测试&剩余时间展示）.mp4 [75.8 MB]
17_尚硅谷_蓝牙音箱（LED功能 驱动测试）.mp4 [77.7 MB]
06_尚硅谷_蓝牙音箱（Demo试运行）.mp4 [123.1 MB]
📁 03_代码
📁 demo_edr
📁 board
📁 wl82
📁 obj
📁 Release
📁 cpu
📁 wl82
📁 key
plcnt.o [1.2 KB]
adc_api.o [24.4 KB]
rdec.o [1.2 KB]
irflt.o [1.2 KB]
ctmu.o [1.2 KB]
setup.o [5.7 KB]
debug.o [38.5 KB]
iic.o [23.7 KB]
port_waked_up.o [10.9 KB]
📁 lib
📁 net
version.z.o [448.0 B]
📁 utils
version.z.o [452.0 B]
📁 server
version.z.o [452.0 B]
📁 include_lib
📁 server
version.z.o [468.0 B]
📁 system
version.z.o [468.0 B]
📁 btctrler
version.z.o [516.0 B]
📁 net
version.z.o [464.0 B]
📁 update
version.z.o [468.0 B]
📁 btstack
version.z.o [472.0 B]
📁 utils
version.z.o [468.0 B]
📁 media
version.z.o [468.0 B]
📁 driver
version.z.o [468.0 B]
📁 apps
📁 demo
📁 demo_edr
📁 board
…（层级过深，已停止）
bt_emitter.o [1.3 KB]
bt_music.o [47.6 KB]
led_driver.o [5.5 KB]
spp_trans_data.o [14.7 KB]
app_main.o [7.0 KB]
bt_decode.o [37.2 KB]
📁 common
📁 key
iokey.o [10.2 KB]
adkey.o [5.7 KB]
key_driver.o [9.3 KB]
📁 audio_music
audio_config.o [10.4 KB]
📁 net
wifi_conf.o [14.4 KB]
📁 jl_math
jl_fft.o [126.1 KB]
flfft_core_pi32v2.o [7.8 KB]
📁 config
📁 log_config
…（层级过深，已停止）
bt_profile_config.o [4.0 KB]
user_cfg.o [22.0 KB]
📁 system
system_reset_reason.o [7.9 KB]
init.o [18.0 KB]
version.o [4.9 KB]
📁 debug
debug_user.o [1.3 KB]
debug.o [1.2 KB]
📁 update
update.o [26.8 KB]
board.c [5.0 KB]
AC791N_DEMO_DEMO_EDR.layout [2.0 KB]
AC791N_DEMO_DEMO_EDR.depend [55.7 KB]
Makefile [13.6 KB]
AC791N_DEMO_DEMO_EDR.cbp [29.6 KB]
📁 include
led_driver.h [365.0 B]
bt_emitter.h [582.0 B]
app_config.h [3.7 KB]
led_driver.c [5.6 KB]
bt_emitter.c [24.7 KB]
bt_decode.c [25.9 KB]
spp_trans_data.c [7.3 KB]
bt_music.c [38.7 KB]
app_main.c [3.2 KB]
fw-AC79_AIoT_SDK-release-AC79NN_SDK_V1.2.0.zip [280.6 MB]
📁 22_尚硅谷嵌入式技术之高频面试题
📁 03_代码
BJ231113大保健笔记.txt [16.9 KB]
📁 04_视频
📁 day05
04_算法.mp4 [33.2 MB]
02_智能门锁项目串讲.mp4 [32.2 MB]
03_数据结构.mp4 [59.2 MB]
01_智能门锁梳理.mp4 [98.4 MB]
📁 day06
05_智能网关笔记总结梳理.mp4 [60.7 MB]
02_进程与线程_2.mp4 [78.0 MB]
07_关于线程数量增加的说明.mp4 [5.2 MB]
03_进程与线程_3.mp4 [45.5 MB]
01_进程与线程_1.mp4 [93.4 MB]
04_智能网关项目.mp4 [76.9 MB]
06_智能网关串讲.mp4 [47.7 MB]
📁 day02
04_32_GPIO.mp4 [18.4 MB]
01_32_ARM架构.mp4 [54.9 MB]
06_32_IIC开漏.mp4 [20.8 MB]
10_32_无线通信对比.mp4 [37.6 MB]
09_32_有线通信对比&适用场景.mp4 [79.1 MB]
11_32_定时器&杂七杂八.mp4 [47.4 MB]
02_32_基本概念.mp4 [12.1 MB]
05_32_IIC.mp4 [52.2 MB]
03_32_中断.mp4 [74.8 MB]
07_32_SPI.mp4 [32.2 MB]
08_32_串口.mp4 [25.8 MB]
📁 day04
03_无人机杂七杂八.mp4 [13.1 MB]
04_宠物定位器梳理.mp4 [47.0 MB]
05_宠物定位器串讲.mp4 [18.8 MB]
01_无人机项目梳理.mp4 [47.5 MB]
06_几个在校小项目.mp4 [28.6 MB]
02_无人机串讲.mp4 [68.9 MB]
📁 day03
04_FreeRTOS_中断.mp4 [28.6 MB]
11_项目串讲举例.mp4 [16.8 MB]
08_项目通用问题.mp4 [51.6 MB]
02_FreeRTOS_原理.mp4 [43.9 MB]
09_项目_平衡车回忆.mp4 [73.6 MB]
05_FreeRTOS_中断2.mp4 [3.0 MB]
01_FreeRTOS_基本概念.mp4 [22.3 MB]
06_FreeRTOS_通信机制.mp4 [52.8 MB]
07_FreeRTOS_内存&低功耗.mp4 [28.6 MB]
03_FreeRTOS_优先级.mp4 [24.6 MB]
10_项目串讲的思路和方法.mp4 [60.7 MB]
📁 day01
12_C语言_内存.mp4 [58.1 MB]
04_C语言_数据类型.mp4 [52.0 MB]
11_C语言_关键字.mp4 [15.7 MB]
06_C语言_指针_1.mp4 [51.4 MB]
08_C语言_结构体1.mp4 [38.6 MB]
09_C语言_共用体.mp4 [5.4 MB]
05_C语言_数组.mp4 [18.9 MB]
01_C语言_入门.mp4 [13.7 MB]
10_C语言_函数.mp4 [52.3 MB]
02_C语言_变量.mp4 [21.3 MB]
03_C语言_宏.mp4 [13.2 MB]
07_C语言_指针_2.mp4 [70.9 MB]
📁 答疑
240719答疑.mp4 [207.0 MB]
02_尚硅谷嵌入式技术之面试真题240719.docx [555.4 KB]
02_尚硅谷嵌入式技术之面试真题24071901.docx [548.9 KB]
📁 day07
01_面试真题_1.mp4 [185.9 MB]
02_面试真题_2.mp4 [134.2 MB]
240110大保健笔记.txt [25.7 KB]
📁 01_笔记
01_尚硅谷嵌入式技术之高频面试题1.2.4.docx [13.9 MB]
02_尚硅谷嵌入式技术之面试真题24060401.docx [542.9 KB]
📁 24_直流减速电机驱动板
📁 2.资料
📁 Modbus RTU通讯协议详解与实例演示 - 成都亿佰特 - 博客园_files
search.svg [266.0 B]
35695-20250219114350830-1374096630.jpg [56.5 KB]
bundle-bluesky-mobile.min.css [3.4 KB]
35695-20241201073014811-1847930772.jpg [50.8 KB]
2022721134546048.png [56.7 KB]
message.svg [476.0 B]
myblog.svg [640.0 B]
highlight.min.js.下载 [173.3 KB]
2022721134558223.png [49.6 KB]
logo.svg [7.7 KB]
2022721134543165.png [50.8 KB]
avatar-default.svg [627.0 B]
2022721134541497.png [45.1 KB]
jquery-3.3.1.min.js.下载 [84.9 KB]
cnblogs.css [831.0 B]
bundle-bluesky.min.css [5.4 KB]
lite-mode-check.svg [434.0 B]
20220414154959.png [3.6 KB]
newpost.svg [284.0 B]
blog-common.min.css [85.0 KB]
blog-common.min.js.下载 [362.2 KB]
35695-20250219114240566-630311367.jpg [40.0 KB]
enter.svg [449.0 B]
2022721134551398.png [50.1 KB]
2022721134544984.png [49.9 KB]
lite-mode-on.svg [277.0 B]
logo.gif [43.0 B]
35695-20230906145857937-1471873834.gif [94.0 KB]
2022721134549283.png [43.0 KB]
Modbus RTU通讯协议详解与实例演示 - 成都亿佰特 - 博客园.html [111.5 KB]
m24c02-w.pdf [1.5 MB]
SCH_直流电机控制板_2025-01-10.pdf [264.5 KB]
框图.svg [50.2 KB]
freemodbus-v1.6.zip [4.8 MB]
OLED显示屏.zip [2.4 MB]
📁 4.视频
📁 day24
10_计算PID的准备.mp4 [67.7 MB]
07_电机驱动光耦和驱动芯片介绍.mp4 [18.7 MB]
11_PID控制转速正转.mp4 [73.5 MB]
13_PID调节优化.mp4 [110.3 MB]
06_电机驱动测试.mp4 [89.9 MB]
01_内容回顾.mp4 [78.5 MB]
03_从设备ID管理.mp4 [136.5 MB]
12_PID控制反转.mp4 [64.0 MB]
02_切换展示不同的页面.mp4 [155.7 MB]
04_电机硬件结构.mp4 [94.6 MB]
05_电机驱动代码编写.mp4 [76.2 MB]
09_获取转速.mp4 [216.6 MB]
08_按键控制电机转动.mp4 [85.1 MB]
📁 day23
09_EEPROM从设备ID存储.mp4 [91.4 MB]
08_OLED展示部分.mp4 [244.4 MB]
11_目标速度显示功能展示.mp4 [197.1 MB]
07_公共层日志打印构建.mp4 [124.6 MB]
05_驱动电机组成介绍.mp4 [10.8 MB]
06_实机演示.mp4 [174.7 MB]
02_驱动电机背景介绍.mp4 [192.1 MB]
10_实现按键功能.mp4 [63.1 MB]
03_驱动电机原理介绍.mp4 [133.5 MB]
01_驱动电机课程介绍.mp4 [988.7 MB]
04_驱动电机硬件原理.mp4 [43.9 MB]
📁 1.笔记
驱动电机.xmind [1.8 MB]
驱动电机开发流程.xmind [205.3 KB]
尚硅谷嵌入式项目之直流减速电机.docx [4.7 MB]
📁 3.代码
PPP03_motor_hal.zip [14.9 MB]
📁 20_嵌入式项目之平衡车
📁 03_代码
CAR_REG（寄存器版本）.zip [2.6 MB]
CAR_HAL（HAL库版本）.zip [12.2 MB]
📁 04_视频
16_角度计算_前置知识_MPU6050介绍.mp4 [125.3 MB]
22_角度计算_计算角度的方案分析.mp4 [328.6 MB]
41_HAL方式_硬件接口层移植修改.mp4 [129.2 MB]
38_无线遥控_前后控制编码&测试.mp4 [266.1 MB]
17_角度计算_IIC驱动&MPU6050驱动读写函数.mp4 [132.5 MB]
08_动力模块_前置知识_电机驱动芯片.mp4 [49.8 MB]
18_角度计算_MPU6050初始化编码1.mp4 [204.2 MB]
26_显示模块_OLED厂商驱动&SPI驱动移植.mp4 [179.8 MB]
06_分层架构&创建初始工程.mp4 [69.4 MB]
11_动力模块_驱动层_定时器pwm模式初始化.mp4 [163.6 MB]
45_HAL方式_编码器计数方式修改&串口2接收修改.mp4 [19.5 MB]
12_动力模块_硬件层_TB6612驱动.mp4 [89.4 MB]
04_PID算法的理解.mp4 [581.4 MB]
42_HAL方式_硬件接口层_OLED修改&告警解决.mp4 [52.4 MB]
25_显示模块_测试ADC采集电池电压.mp4 [53.0 MB]
21_角度计算_MPU6050测试读取六轴数据.mp4 [385.4 MB]
39_无线遥控_左右转向编码&测试.mp4 [255.4 MB]
34_PID调参_速度环参数调试.mp4 [300.3 MB]
29_姿态控制_PID设计方案.mp4 [396.0 MB]
37_无线遥控_测试蓝牙AT指令.mp4 [109.7 MB]
03_硬件概述.mp4 [866.2 MB]
27_显示模块_修改OLED驱动&测试.mp4 [247.0 MB]
30_姿态控制_PID算法编码实现.mp4 [230.9 MB]
05_PID算法总结梳理.mp4 [48.4 MB]
09_动力模块_前置知识_霍尔编码器.mp4 [803.8 MB]
02_项目总体概述.mp4 [45.2 MB]
10_动力模块_前置知识_定时器编码器模式.mp4 [145.8 MB]
28_显示模块_显示需要的数据.mp4 [543.1 MB]
47_总结_PID参数细调思路.mp4 [281.1 MB]
19_角度计算_MPU6050初始化设置采样率和低通滤波.mp4 [141.1 MB]
24_显示模块_ADC驱动编码.mp4 [101.4 MB]
46_HAL方式_初始化硬件&测试小车功能.mp4 [125.7 MB]
43_HAL方式_中间层FreeRTOS修改.mp4 [41.4 MB]
40_HAL方式_创建工程&配置驱动层.mp4 [91.4 MB]
35_PID调参_转向环参数调试.mp4 [238.9 MB]
23_角度计算_计算角度编码&测试.mp4 [465.1 MB]
32_任务调度_FreeRTOS任务配置.mp4 [155.2 MB]
20_角度计算_MPU6050读取传感器数据.mp4 [57.8 MB]
14_动力模块_驱动层_编码器模式配置.mp4 [258.6 MB]
36_无线遥控_蓝牙ECB01简介&移植USART2驱动.mp4 [142.6 MB]
07_移植FreeRTOS.mp4 [62.1 MB]
44_HAL方式_应用层移植修改.mp4 [54.8 MB]
15_动力模块_配置打印到串口&测试编码器.mp4 [448.6 MB]
31_姿态控制_PID控制编码实现.mp4 [156.3 MB]
48_总结_项目总结串讲.mp4 [66.4 MB]
13_动力模块_测试输出控制电机.mp4 [272.2 MB]
33_PID调参_直立环参数调试.mp4 [698.1 MB]
📁 01_笔记
尚硅谷嵌入式项目之平衡车（寄存器+HAL）+1.1.0.docx [16.5 MB]
项目笔记.drawio [100.0 KB]
📁 02_资料
📁 06_TB6612
C141517_电机驱动芯片_TB6612FNG,C,8,EL_规格书_TOSHIBA(东芝)电机驱动芯片规格书.PDF [576.2 KB]
📁 01_手册
STM32F10xxx Cortex-M3编程手册-英文版-PM0056-Rev6.pdf [2.0 MB]
STM32F103x8B_数据手册_英文原版.pdf [1.9 MB]
STM32F10xxx参考手册_中文.pdf [15.2 MB]
STM32F103x8B_数据手册_中文.pdf [1.8 MB]
📁 04_OLED资料
📁 01-PCtoLCD2002完美版
readme2002.txt [4.3 KB]
notice.txt [2.1 KB]
Gb2312.PTL [17.7 KB]
PCtoLCD2002.exe [303.0 KB]
_index.TXT [20.0 B]
PCtoLCD2002.INI [519.0 B]
RTL60.BPL [660.5 KB]
中景园电子0-96寸OLED模块资料V2.0.zip [47.5 MB]
01-0.96OLED显示屏STM32F103C8T6_SPI例程.zip [323.4 KB]
中景园电子0.96寸OLED使用文档新手必看V2.0.pdf [1.6 MB]
📁 05_MPU6050资料
MPU-6000 & MPU-6050 寄存器表及其描述(英文版).pdf [899.9 KB]
MPU-6000 & MPU-6050产品说明书(中文版).pdf [719.0 KB]
MPU-6000 & MPU-6050产品说明书(英文版).pdf [1.4 MB]
MPU-6000 & MPU-6050 寄存器表及其描述(中文版).pdf [1.3 MB]
📁 02_原理图
SCH_平衡车_2023-12-18.pdf [890.3 KB]
📁 08_FreeRTOS
FreeRTOSv202212.01.zip [88.3 MB]
📁 07_ECB01资料
ECB01C蓝牙芯片技术手册V1.2.pdf [629.2 KB]
ECB01系列蓝牙AT命令手册V1.1.pdf [192.0 KB]
易加蓝牙常见问题汇总V2.0.pdf [1.4 MB]
📁 09_卡尔曼滤波
Com_Filter.h [109.0 B]
Com_Filter.c [1.6 KB]
📁 03_STM32库
📁 参考笔记
01_尚硅谷嵌入式技术之STM32单片机（基础篇）1.0.1.docx [74.7 MB]
03_尚硅谷嵌入式技术之STM32单片机（高级篇）1.0.1.docx [24.6 MB]
04_尚硅谷嵌入式技术之STM32单片机（扩展篇）1.0.1.docx [14.8 MB]
02_尚硅谷嵌入式技术之STM32单片机（进阶篇）1.0.1.docx [53.0 MB]
en.stsw-stm32054_v3-6-0.zip [21.2 MB]
平衡车演示.MP4 [194.3 MB]
平衡车项目简介.txt [2.3 KB]
📁 19_嵌入式技术之嵌入式Linux内核与驱动移植
📁 1.笔记
1.笔记必看.zip [1.8 MB]
尚硅谷嵌入式之嵌入式Linux内核与驱动移植v1.0.1.docx [2.5 MB]
📁 3.视频
📁 资料
mosquitto-2.0.18-install-windows-x64.exe [24.7 MB]
蓝牙AT指令和数据帧.txt [865.0 B]
log.c-master.zip [4.8 KB]
python-3.13.2-amd64.exe [27.3 MB]
simple-http-server.zip [869.7 KB]
Git-2.45.2-64-bit.exe [65.0 MB]
22_尚硅谷嵌入式技术之版本控制.zip [123.0 MB]
doorbell_240922.zip [90.4 KB]
99_尚硅谷嵌入式项目之智能门铃.zip [129.8 MB]
07_尚硅谷嵌入式项目之51智能车.zip [45.0 MB]
Bluetooth_Node.zip [10.0 MB]
phone_client.html [324.8 KB]
尚硅谷嵌入式项目之智能网关v1.0.5.docx [15.2 MB]
JDY-24M超级蓝牙模块手册.doc [807.9 KB]
99_尚硅谷嵌入式技术之Linux应用层开发.zip [63.4 MB]
llcom.zip [3.1 MB]
esp-idf-tools-setup-offline-5.2.3.exe [976.6 MB]
c.code-snippets [900.0 B]
20_尚硅谷嵌入式技术之Linux入门.zip [643.0 MB]
尚硅谷嵌入式技术之Linux应用层开发.docx [10.4 MB]
uboot启动命令.txt [193.0 B]
cJSON-master.zip [449.4 KB]
面试常见问题.md [477.0 B]
mosquitto.conf [39.5 KB]
STM32开发板接线.jpg [22.3 KB]
项目架构框图.drawio [12.0 KB]
python-3.13.0-amd64.exe [26.9 MB]
buildroot-toolchain配置.png [77.4 KB]
MQTTX-Setup-1.11.0-x64.exe [68.1 MB]
智能门铃项目介绍.md [3.3 KB]
launch.json [823.0 B]
mosquitto-2.0.18a-install-windows-x64.exe [24.9 MB]
Linux开发板接线.png [16.7 KB]
亦亚徽EP4303B-DCT产品规格书.pdf [691.9 KB]
项目总结.txt [1.5 KB]
21_尚硅谷嵌入式技术之Shell.zip [360.3 KB]
mqttx配置.png [12.9 KB]
audio-video-web.zip [1.3 MB]
ESP32 OTA流程.drawio [9.8 KB]
idf_component.yml [595.0 B]
ESP_BLE_Prov_2_2_0.apk [5.1 MB]
ESP配置.txt [225.0 B]
esp8089-kernel-6.6.zip [323.7 KB]
51智能车-240628.zip [38.2 KB]
99_尚硅谷嵌入式项目之WiFi天气.zip [370.6 MB]
sun8i-v3s-atguigupi.dts [2.6 KB]
99_尚硅谷嵌入式项目之智能网关.zip [19.9 MB]
init_lvgl.sh [10.3 KB]
home.html [9.1 KB]
蓝牙指令.txt [222.0 B]
16_尚硅谷嵌入式技术之蓝牙音箱.zip [740.0 MB]
2_uboot移植.mkv [210.3 MB]
6_rootfs的配置和构建.mkv [70.2 MB]
8_刷入rootfs.mkv [12.7 MB]
10_按键驱动移植.mkv [65.1 MB]
1_Linux移植概述.mkv [211.3 MB]
7_构建jffs2镜像.mkv [8.7 MB]
内存布局.pptx [321.7 KB]
4_内核的编译.mkv [43.7 MB]
5_内核的刷入.mkv [53.6 MB]
3_内核设备树.mkv [160.7 MB]
9_其他外设.mkv [102.9 MB]
11_WiFi驱动.mkv [138.4 MB]
📁 2.资料
Allwinner_V3s_Datasheet_V1.0.pdf [5.1 MB]
gcc-linaro-12.3.1-2023.06-x86_64_arm-linux-gnueabihf.tar.xz [145.1 MB]
亦亚徽EP4303B-DCT产品规格书.pdf [691.9 KB]
0001-Squashed-commit-of-the-following.patch [21.1 KB]
linux-6.6.15.tar.xz [133.6 MB]
SCH_V3S_2024-04-23.pdf [2.2 MB]
sunxi-fel [85.3 KB]
📁 26_智能门锁
📁 1.笔记
📁 指纹模块文档
📁 FPM383C-80x64
📁 fingerPrintfBmp
10_12_16_07_16_293.bmp [6.1 KB]
10_19_14_39_03_576.bmp [6.1 KB]
10_12_16_07_30_649.bmp [6.1 KB]
10_19_14_04_42_551.bmp [6.1 KB]
10_19_14_54_09_487.bmp [6.1 KB]
10_19_14_37_10_880.bmp [6.1 KB]
10_19_14_04_17_845.bmp [6.1 KB]
10_12_16_07_19_863.bmp [6.1 KB]
10_19_14_16_38_703.bmp [6.1 KB]
10_19_14_04_32_430.bmp [6.1 KB]
10_19_14_04_44_316.bmp [6.1 KB]
10_19_14_54_11_460.bmp [6.1 KB]
10_19_14_16_34_949.bmp [6.1 KB]
10_12_16_07_27_125.bmp [6.1 KB]
10_19_14_53_53_228.bmp [6.1 KB]
10_19_14_38_55_454.bmp [6.1 KB]
10_19_14_04_16_097.bmp [6.1 KB]
10_12_16_07_34_153.bmp [6.1 KB]
10_14_11_21_27_609.bmp [6.1 KB]
10_19_14_04_34_185.bmp [6.1 KB]
10_12_16_07_21_900.bmp [6.1 KB]
10_19_14_04_19_635.bmp [6.1 KB]
10_19_14_04_38_479.bmp [6.1 KB]
10_12_16_07_18_078.bmp [6.1 KB]
10_19_14_57_45_739.bmp [6.1 KB]
10_12_16_07_23_647.bmp [6.1 KB]
10_12_16_07_32_402.bmp [6.1 KB]
10_19_14_04_27_890.bmp [6.1 KB]
10_12_16_07_28_888.bmp [6.1 KB]
10_19_14_39_07_136.bmp [6.1 KB]
10_19_14_38_19_834.bmp [6.1 KB]
10_19_14_57_52_302.bmp [6.1 KB]
10_19_14_16_36_705.bmp [6.1 KB]
10_19_14_04_25_647.bmp [6.1 KB]
10_19_14_57_55_778.bmp [6.1 KB]
10_19_14_04_46_070.bmp [6.1 KB]
10_19_14_04_12_590.bmp [6.1 KB]
10_19_14_04_14_317.bmp [6.1 KB]
10_19_14_53_51_494.bmp [6.1 KB]
10_19_14_16_33_195.bmp [6.1 KB]
10_12_16_07_25_400.bmp [6.1 KB]
10_19_14_37_09_129.bmp [6.1 KB]
10_19_14_16_29_720.bmp [6.1 KB]
10_19_14_16_31_444.bmp [6.1 KB]
10_19_14_04_35_975.bmp [6.1 KB]
10_19_14_04_23_647.bmp [6.1 KB]
10_19_14_04_21_894.bmp [6.1 KB]
10_19_14_39_05_351.bmp [6.1 KB]
10_19_14_57_54_041.bmp [6.1 KB]
10_19_14_04_40_256.bmp [6.1 KB]
fingermodule.exe [21.4 MB]
mcp2221_dll_um_x86.dll [107.5 KB]
log.txt [4.4 MB]
libgcc_s_dw2-1.dll [117.0 KB]
result.xlsx [265.4 KB]
libstdc++-6.dll [1002.0 KB]
libwinpthread-1.dll [48.0 KB]
config.ini [286.0 B]
指纹上位机使用指南.pdf [386.9 KB]
FPM583F模组规格书V1.0.2.pdf [1.3 MB]
FPM383C模组通信协议_V1.2.pdf [819.0 KB]
指纹测试工具.zip [11.2 MB]
📁 语音芯片文档
WTN6 E系列语音芯片使用说明书V1.08.pdf [2.0 MB]
WTN6210914-E4-V2.04-E广州唯创电子锁标准-WTN6170E-PWM-210914.pdf [94.4 KB]
尚硅谷嵌入式项目之智能门锁1.1.0.docx [29.9 MB]
面试大保健.drawio [1.1 MB]
App_IO.pptx [228.4 KB]
esp32-c3_technical_reference_manual_cn.pdf [9.8 MB]
课堂笔记.txt [2.5 KB]
SCH_智能锁主控板V0.2_2024-04-07.pdf [926.3 KB]
电容键盘.pdf [1.1 MB]
📁 2.资料
esp-idf-tools-setup-offline-5.3.1.exe [970.4 MB]
📁 3.代码
📁 atguigu_smart_lock
📁 main
📁 Inf
Inf_BDR6120.h [553.0 B]
Inf_BDR6120.c [1.6 KB]
📁 Common
Com_Config.h [275.0 B]
Com_Debug.h [2.1 KB]
Com_Debug.c [162.0 B]
main.c [296.0 B]
CMakeLists.txt [179.0 B]
📁 .devcontainer
devcontainer.json [416.0 B]
Dockerfile [279.0 B]
README.md [1.8 KB]
CMakeLists.txt [387.0 B]
sdkconfig.old [58.6 KB]
sdkconfig [58.6 KB]
📁 视频
📁 day04
20_尚硅谷_智能门锁（指纹开锁模块 整体测试）.mp4 [231.3 MB]
01_尚硅谷_智能门锁（每日回顾）.mp4 [72.3 MB]
11_尚硅谷_智能门锁（指纹开锁模块 获取最小可用ID）.mp4 [53.5 MB]
14_尚硅谷_智能门锁（指纹开锁模块 验证指纹）.mp4 [68.2 MB]
03_尚硅谷_智能门锁（指纹开锁模块 ESP32 UART使用方式）.mp4 [28.9 MB]
15_尚硅谷_智能门锁（指纹开锁模块 删除指定指纹）.mp4 [47.4 MB]
13_尚硅谷_智能门锁（指纹开锁模块 录入指纹）.mp4 [55.7 MB]
07_尚硅谷_智能门锁（指纹开锁模块 ESP32 读取ID号 测试）.mp4 [51.3 MB]
05_尚硅谷_智能门锁（指纹开锁模块 ESP32 收发数据）.mp4 [53.2 MB]
16_尚硅谷_智能门锁（指纹开锁模块 清空指纹库）.mp4 [19.9 MB]
18_尚硅谷_智能门锁（指纹开锁模块 注册指纹业务逻辑）.mp4 [38.9 MB]
02_尚硅谷_智能门锁（指纹开锁模块 芯片介绍）.mp4 [93.0 MB]
06_尚硅谷_智能门锁（指纹开锁模块 ESP32 进入休眠）.mp4 [35.4 MB]
19_尚硅谷_智能门锁（指纹开锁模块 删除指纹业务逻辑）.mp4 [22.0 MB]
17_尚硅谷_智能门锁（指纹开锁模块 验证指纹开锁）.mp4 [93.1 MB]
09_尚硅谷_智能门锁（指纹开锁模块 ESP32 分析录入指纹流程）.mp4 [111.6 MB]
04_尚硅谷_智能门锁（指纹开锁模块 ESP32 初始化）.mp4 [58.8 MB]
10_尚硅谷_智能门锁（指纹开锁模块 ESP32 补充校验和）.mp4 [45.2 MB]
12_尚硅谷_智能门锁（指纹开锁模块 取消自动操作）.mp4 [24.8 MB]
08_尚硅谷_智能门锁（指纹开锁模块 ESP32 中断测试）.mp4 [40.6 MB]
📁 day03
02_尚硅谷_智能门锁（按键开锁模块 NVS存储 示例代码）.mp4 [75.1 MB]
05_尚硅谷_智能门锁（按键开锁模块 NVS存储 关于密码存储 2）.mp4 [42.5 MB]
08_尚硅谷_智能门锁（按键开锁模块 NVS存储 测试）.mp4 [180.1 MB]
04_尚硅谷_智能门锁（按键开锁模块 NVS存储 关于密码存储）.mp4 [28.0 MB]
13_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 创建按键开锁任务）.mp4 [60.1 MB]
07_尚硅谷_智能门锁（按键开锁模块 NVS存储 删除数据&判断是否存在）.mp4 [37.8 MB]
16_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 添加管理员）.mp4 [92.9 MB]
09_尚硅谷_智能门锁（按键开锁模块 NVS存储 测试 2）.mp4 [35.0 MB]
10_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 需求分析）.mp4 [62.6 MB]
21_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 注册普通用户）.mp4 [40.3 MB]
19_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 删除管理员）.mp4 [16.6 MB]
24_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 验证普通用户 测试）.mp4 [54.3 MB]
11_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 代码逻辑分析）.mp4 [28.5 MB]
20_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 删除管理员 测试）.mp4 [26.9 MB]
06_尚硅谷_智能门锁（按键开锁模块 NVS存储 读写数据）.mp4 [29.8 MB]
12_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 所有基础模块初始化）.mp4 [28.1 MB]
22_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 注册普通用户 测试）.mp4 [43.9 MB]
01_尚硅谷_智能门锁（每日回顾）.mp4 [77.3 MB]
23_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 删除普通用户 测试）.mp4 [50.5 MB]
14_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 读取按键组合函数）.mp4 [62.0 MB]
18_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 验证管理员）.mp4 [60.0 MB]
17_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 添加管理员 测试）.mp4 [68.7 MB]
15_尚硅谷_智能门锁（按键开锁模块 业务逻辑模块 处理按键组合 总体逻辑）.mp4 [28.4 MB]
03_尚硅谷_智能门锁（按键开锁模块 NVS存储 初始化）.mp4 [23.0 MB]
📁 day05
14_尚硅谷_智能门锁（OTA模块 OTA模块 代码移植）.mp4 [74.3 MB]
08_尚硅谷_智能门锁（蓝牙开锁模块 业务代码 测试）.mp4 [41.9 MB]
16_尚硅谷_智能门锁（项目总结 硬件选型）.mp4 [49.8 MB]
02_尚硅谷_智能门锁（每日回顾）.mp4 [57.3 MB]
07_尚硅谷_智能门锁（蓝牙开锁模块 业务代码）.mp4 [76.6 MB]
09_尚硅谷_智能门锁（OTA模块 基础介绍&前置条件说明）.mp4 [35.3 MB]
06_尚硅谷_智能门锁（蓝牙开锁模块 示例程序移植&测试）.mp4 [75.1 MB]
03_尚硅谷_智能门锁（蓝牙&Wifi 基础介绍）.mp4 [34.7 MB]
05_尚硅谷_智能门锁（蓝牙开锁模块 示例程序 测试）.mp4 [55.4 MB]
15_尚硅谷_智能门锁（OTA模块 OTA模块 代码测试）.mp4 [59.2 MB]
17_尚硅谷_智能门锁（项目总结 业务梳理）.mp4 [97.7 MB]
12_尚硅谷_智能门锁（OTA模块 Wifi模块 示例程序说明）.mp4 [56.3 MB]
04_尚硅谷_智能门锁（蓝牙开锁模块 示例程序 说明）.mp4 [131.7 MB]
11_尚硅谷_智能门锁（OTA模块 分区表文件）.mp4 [20.2 MB]
10_尚硅谷_智能门锁（OTA模块 启动服务器）.mp4 [36.4 MB]
01_尚硅谷_智能门锁（语音模块音量调节&bug修复）.mp4 [47.2 MB]
13_尚硅谷_智能门锁（OTA模块 Wifi模块 示例程序移植）.mp4 [135.3 MB]
📁 day01
06_尚硅谷_智能门锁（ESP32开发环境安装 VSCode插件安装&IDF配置）.mp4 [73.3 MB]
15_尚硅谷_智能门锁（按键开锁功能模块 电机模块 开锁函数封装）.mp4 [21.7 MB]
08_尚硅谷_智能门锁（创建初始项目 HelloWorld程序 测试）.mp4 [59.2 MB]
05_尚硅谷_智能门锁（ESP32开发环境安装 IDF安装）.mp4 [66.4 MB]
02_尚硅谷_智能门锁（功能描述）.mp4 [44.5 MB]
18_尚硅谷_智能门锁（按键开锁功能模块 语音模块 初始化&发送指令）.mp4 [49.1 MB]
10_尚硅谷_智能门锁（ESP32 基础配置&外设模块）.mp4 [81.0 MB]
17_尚硅谷_智能门锁（按键开锁功能模块 语音模块 芯片使用方式介绍）.mp4 [52.6 MB]
13_尚硅谷_智能门锁（按键开锁功能模块 电机模块 GPIO操作官方示例程序）.mp4 [32.8 MB]
01_尚硅谷_智能门锁（项目整体介绍）.mp4 [39.7 MB]
03_尚硅谷_智能门锁（系统总体设计）.mp4 [21.3 MB]
09_尚硅谷_智能门锁（创建初始项目 HelloWorld程序 测试说明）.mp4 [9.6 MB]
11_尚硅谷_智能门锁（创建项目&公共模块处理）.mp4 [33.6 MB]
07_尚硅谷_智能门锁（创建初始项目 目录结构说明）.mp4 [51.8 MB]
12_尚硅谷_智能门锁（按键开锁功能模块 电机模块 手册解读）.mp4 [58.0 MB]
04_尚硅谷_智能门锁（硬件选型）.mp4 [134.7 MB]
14_尚硅谷_智能门锁（按键开锁功能模块 电机模块 初始化）.mp4 [63.3 MB]
19_尚硅谷_智能门锁（按键开锁功能模块 语音模块 测试）.mp4 [39.7 MB]
16_尚硅谷_智能门锁（按键开锁功能模块 电机模块 测试）.mp4 [97.1 MB]
📁 day02
05_尚硅谷_智能门锁（按键开锁模块 电容键盘 I2C模块读写寄存器）.mp4 [31.4 MB]
10_尚硅谷_智能门锁（按键开锁模块 电容键盘 中断方式获取按键 测试）.mp4 [66.3 MB]
03_尚硅谷_智能门锁（按键开锁模块 电容键盘 ESP32 I2C使用方式）.mp4 [37.4 MB]
09_尚硅谷_智能门锁（按键开锁模块 电容键盘 I2C模块获取按键值 中断方式获取按键）.mp4 [43.9 MB]
01_尚硅谷_智能门锁（每日回顾）.mp4 [120.6 MB]
04_尚硅谷_智能门锁（按键开锁模块 电容键盘 I2C模块初始化）.mp4 [66.7 MB]
06_尚硅谷_智能门锁（按键开锁模块 电容键盘 I2C模块获取按键值）.mp4 [37.6 MB]
08_尚硅谷_智能门锁（按键开锁模块 电容键盘 I2C模块获取按键值 中断示例程序）.mp4 [72.2 MB]
07_尚硅谷_智能门锁（按键开锁模块 电容键盘 I2C模块获取按键值 测试）.mp4 [63.1 MB]
02_尚硅谷_智能门锁（按键开锁模块 电容键盘 芯片手册说明）.mp4 [152.4 MB]
📁 25_智能门铃
📁 02_资料
📁 esp32_s3
esp32-s3_technical_reference_manual_cn.pdf [14.2 MB]
esp32-s3_datasheet_cn.pdf [1.6 MB]
📁 wifi 配网app
ESP_BLE_Prov_2_2_0.apk [5.1 MB]
📁 pthon
📁 安装包
python-3.13.0-amd64.exe [26.9 MB]
📁 服务器程序
web_server.zip [383.5 KB]
📁 音频功放
NS4150B.PDF [3.2 MB]
📁 编解码器
ES8311.PDF [533.6 KB]
📁 摄像头
OV2640.PDF [210.0 KB]
OV2640_DS.pdf [661.1 KB]
OV2640_1.pdf [186.7 KB]
📁 原理图
可视门铃.pdf [1.3 MB]
📁 04视频
📁 day02
04_尚硅谷_智能门铃（自助配网 Wifi配网初始化）.mp4 [68.8 MB]
12_尚硅谷_智能门铃（MQTT服务 公共服务器试用）.mp4 [94.3 MB]
17_尚硅谷_智能门铃（MQTT服务 服务器程序启动）.mp4 [35.0 MB]
03_尚硅谷_智能门铃（自助配网 示例程序说明）.mp4 [129.1 MB]
07_尚硅谷_智能门铃（自助配网 配网测试 重新配网存在问题）.mp4 [21.6 MB]
13_尚硅谷_智能门铃（MQTT服务 消息发布&订阅逻辑分析）.mp4 [43.5 MB]
19_尚硅谷_智能门铃（MQTT服务 根据具体指令通知主任务）.mp4 [109.2 MB]
01_尚硅谷_智能门铃（每日回顾）.mp4 [113.4 MB]
09_尚硅谷_智能门铃（自助配网 配网测试 增加Wifi连接成功回调函数）.mp4 [59.0 MB]
10_尚硅谷_智能门铃（MQTT服务 基础介绍）.mp4 [36.7 MB]
02_尚硅谷_智能门铃（自助配网 基础介绍&打开蓝牙）.mp4 [35.2 MB]
06_尚硅谷_智能门铃（自助配网 配网测试）.mp4 [108.7 MB]
16_尚硅谷_智能门铃（MQTT服务 程序 测试）.mp4 [21.3 MB]
14_尚硅谷_智能门铃（MQTT服务 示例程序说明）.mp4 [57.0 MB]
05_尚硅谷_智能门铃（自助配网 Wifi配网&连接Wifi）.mp4 [134.2 MB]
18_尚硅谷_智能门铃（MQTT服务 解析传输过来的JSON数据）.mp4 [64.3 MB]
15_尚硅谷_智能门铃（MQTT服务 示例程序移植）.mp4 [53.3 MB]
11_尚硅谷_智能门铃（MQTT服务 组成部分&工作原理）.mp4 [35.8 MB]
08_尚硅谷_智能门铃（自助配网 配网测试 重新配网实现）.mp4 [39.1 MB]
📁 day04
04_尚硅谷_智能门铃（摄像头模块 初始化）.mp4 [39.3 MB]
05_尚硅谷_智能门铃（摄像头模块 获取图片&释放资源）.mp4 [26.2 MB]
02_尚硅谷_智能门铃（摄像头模块 原理图说明）.mp4 [54.4 MB]
03_尚硅谷_智能门铃（摄像头模块 示例程序说明）.mp4 [82.8 MB]
09_尚硅谷_智能门铃（摄像头模块 修改参数配置&测试）.mp4 [159.2 MB]
07_尚硅谷_智能门铃（摄像头模块 关闭视频客户端&杀死发送任务）.mp4 [13.7 MB]
11_尚硅谷_智能门铃（灯光照明模块 测试）.mp4 [52.2 MB]
06_尚硅谷_智能门铃（摄像头模块 开启视频客户端&发送图片至服务器）.mp4 [82.7 MB]
08_尚硅谷_智能门铃（摄像头模块 测试&出现问题）.mp4 [89.3 MB]
01_尚硅谷_智能门铃（每日回顾）.mp4 [96.6 MB]
12_尚硅谷_智能门铃（项目总结）.mp4 [74.7 MB]
10_尚硅谷_智能门铃（灯光照明模块 接口封装）.mp4 [68.0 MB]
📁 day01
04_尚硅谷_智能门铃（项目总体架构）.mp4 [73.6 MB]
02_尚硅谷_智能门铃（需求介绍）.mp4 [24.5 MB]
15_尚硅谷_智能门铃（音频模块 ES8311 读写数据函数）.mp4 [30.5 MB]
12_尚硅谷_智能门铃（音频模块 ES8311 初始化 I2C）.mp4 [63.3 MB]
17_尚硅谷_智能门铃（音频模块 ES8311 测试完成）.mp4 [18.6 MB]
16_尚硅谷_智能门铃（音频模块 ES8311 测试 BUG&修复）.mp4 [266.9 MB]
07_尚硅谷_智能门铃（I2S协议介绍）.mp4 [26.2 MB]
13_尚硅谷_智能门铃（音频模块 ES8311 初始化 I2S）.mp4 [75.0 MB]
09_尚硅谷_智能门铃（日志系统）.mp4 [11.0 MB]
05_尚硅谷_智能门铃（硬件选型）.mp4 [77.5 MB]
03_尚硅谷_智能门铃（项目特点）.mp4 [30.2 MB]
08_尚硅谷_智能门铃（项目搭建&参数配置）.mp4 [62.8 MB]
14_尚硅谷_智能门铃（音频模块 ES8311 初始化 设备）.mp4 [115.8 MB]
06_尚硅谷_智能门铃（音频基础知识）.mp4 [75.8 MB]
11_尚硅谷_智能门铃（音频模块 ES8311 使用方式介绍）.mp4 [78.7 MB]
10_尚硅谷_智能门铃（音频模块 ES8311 硬件电路）.mp4 [35.8 MB]
01_尚硅谷_智能门铃（课程介绍）.mp4 [55.8 MB]
📁 day03
11_尚硅谷_智能门铃（WebSocket模块 开启关闭音频客户端 整理）.mp4 [23.1 MB]
16_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 读取Mic数据到缓冲区）.mp4 [51.9 MB]
21_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 对讲测试）.mp4 [10.5 MB]
22_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 volatile关键字）.mp4 [35.2 MB]
03_尚硅谷_智能门铃（WebSocket模块 简介）.mp4 [57.3 MB]
17_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 读取缓冲区到服务器）.mp4 [39.9 MB]
14_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 流程分析）.mp4 [67.6 MB]
10_尚硅谷_智能门铃（WebSocket模块 关闭音频客户端 测试）.mp4 [23.7 MB]
19_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 测试&出现Bug）.mp4 [112.8 MB]
13_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 函数封装）.mp4 [42.3 MB]
20_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 测试）.mp4 [138.0 MB]
15_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 创建环形缓冲区）.mp4 [32.7 MB]
04_尚硅谷_智能门铃（WebSocket模块 协议帧格式&应用场景）.mp4 [38.6 MB]
06_尚硅谷_智能门铃（WebSocket模块 初始化）.mp4 [59.2 MB]
07_尚硅谷_智能门铃（WebSocket模块 开启音频客户端）.mp4 [26.3 MB]
02_尚硅谷_智能门铃（WebSocket模块 示例程序下载&说明）.mp4 [40.8 MB]
12_尚硅谷_智能门铃（WebSocket模块 发送主人声音 编码&测试）.mp4 [32.3 MB]
08_尚硅谷_智能门铃（WebSocket模块 开启音频客户端 测试数据流）.mp4 [46.1 MB]
18_尚硅谷_智能门铃（WebSocket模块 WS发送ESP音频数据 删除两个任务）.mp4 [20.2 MB]
05_尚硅谷_智能门铃（WebSocket模块 浏览器访问服务器路径）.mp4 [88.0 MB]
01_尚硅谷_智能门铃（每日回顾）.mp4 [55.5 MB]
09_尚硅谷_智能门铃（WebSocket模块 关闭音频客户端）.mp4 [63.2 MB]
📁 01_笔记
项目总体架构设计.pptx [380.6 KB]
尚硅谷嵌入式项目之智能门铃1.0.0.docx [27.0 MB]
📁 23_尚硅谷嵌入式项目之心电监测仪
📁 01.笔记
尚硅谷嵌入式项目之心电监测仪（寄存器版本）1.0.0.docx [5.9 MB]
尚硅谷嵌入式项目之心电监测仪（HAL库版本）1.0.0.docx [7.3 MB]
📁 03.代码
心电监测代码.zip [10.9 MB]
📁 04.视频
📁 day01
14_ADC驱动验证.mp4 [32.0 MB]
12_收集到的指令转换成数字.mp4 [43.5 MB]
03_心电采集模块.mp4 [73.6 MB]
01_项目需求描述.mp4 [38.3 MB]
10_通讯模块的驱动层完成.mp4 [117.0 MB]
02_硬件选型.mp4 [29.6 MB]
04_软件架构.mp4 [22.7 MB]
09_debug模块完成.mp4 [169.3 MB]
05_项目软件架构.mp4 [3.6 MB]
13_ADC驱动层完成.mp4 [152.7 MB]
07_项目架构的搭建.mp4 [35.4 MB]
11_接收指令.mp4 [163.5 MB]
08_debug模块的底层驱动.mp4 [57.8 MB]
06_中断服务函数的处理.mp4 [54.2 MB]
📁 day02
01_昨日内容回顾.mp4 [68.3 MB]
08_内存泄露的bug.mp4 [67.1 MB]
02_采集模块_定时器驱动.mp4 [122.9 MB]
09_心电采集HAL实现.mp4 [260.1 MB]
07_与上位机通讯.mp4 [136.2 MB]
06_通讯模块发送数据到上位机.mp4 [159.3 MB]
04_采集模块_应用层实现_2.mp4 [87.2 MB]
05_采集模块测试完成.mp4 [39.1 MB]
03_采集模块_应用层实现_1.mp4 [47.3 MB]
📁 02.资料
📁 02_上位机
main.exe [314.1 MB]
📁 01_心电采集模块
AD8232.pdf [669.8 KB]
📁 05_视频_四轴无人机
📁 day_01
02-无人机-组成结构-中.mp4 [116.3 MB]
04-无人机-实现思路.mp4 [18.4 MB]
06-无人机-飞控项目-创建.mp4 [37.9 MB]
01-无人机-组成结构-上.mp4 [94.2 MB]
13-无人机-飞控项目-电源任务-GPIO配置&框架搭建.mp4 [35.7 MB]
19-无人机-飞控项目-飞控任务-电机转速控制.mp4 [85.2 MB]
07-无人机-飞控项目-初始化配置-重定向printf.mp4 [8.4 MB]
14.5-无人机-飞控项目-电源任务-纠错.mp4 [54.4 MB]
03-无人机-组成结构-下.mp4 [83.7 MB]
18-无人机-飞控项目-飞控任务-定时器配置.mp4 [106.9 MB]
08-无人机-飞控项目-初始化配置-集成FreeRTOS.mp4 [71.0 MB]
17-无人机-飞控项目-灯控任务-编码-下.mp4 [178.7 MB]
10-无人机-飞控项目-电源管理任务-概述.mp4 [71.7 MB]
12-无人机-飞控项目-电源任务-IP5305T概述.mp4 [43.5 MB]
05-无人机-项目结构.mp4 [60.8 MB]
15-无人机-飞控项目-灯控任务-GPIO配置.mp4 [83.5 MB]
📁 day_02
00-FreeRTOS-中断处理脚本使用说明.mp4 [41.5 MB]
09-无人机-飞控项目-通信任务-SI24R1-驱动移植-中.mp4 [41.4 MB]
15-无人机-遥控项目-通信任务&电源任务-移植和测试.mp4 [141.1 MB]
04-无人机-飞控项目-通信任务-SI24R1-通讯协议.mp4 [62.4 MB]
14-无人机-飞控项目-通信任务-SI24R1-接收数据测试程序.mp4 [36.0 MB]
12-无人机-飞控项目-通信任务-SI24R1-驱动说明-下.mp4 [77.3 MB]
10-无人机-飞控项目-通信任务-SI24R1-驱动移植-下.mp4 [104.2 MB]
配置.txt [37.0 B]
11-无人机-飞控项目-通信任务-SI24R1-驱动说明-上.mp4 [90.1 MB]
16-无人机-遥控项目-电源任务-问题说明.mp4 [29.4 MB]
06-无人机-飞控项目-通信任务-SI24R1-多通道通信.mp4 [8.2 MB]
02-无人机-飞控项目-通信任务-SI24R1-芯片结构.mp4 [21.0 MB]
03-无人机-飞控项目-通信任务-SI24R1-工作模式.mp4 [42.0 MB]
07-无人机-飞控项目-通信任务-SI24R1-SPI接口&寄存器说明.mp4 [40.5 MB]
01-无人机-飞控项目-通信任务-SI24R1-简介.mp4 [109.2 MB]
📁 day_05
06-无人机-飞控系统-MPU6050-基础驱动-编写-下.mp4 [162.0 MB]
10-无人机-飞控系统-MPU6050-测试-零偏校准-上.mp4 [32.8 MB]
04-无人机-飞控系统-MPU6050-基础驱动-编写-上.mp4 [98.7 MB]
11-无人机-飞控系统-MPU6050-测试-零偏校准-下.mp4 [105.0 MB]
14-无人机-飞控系统-MPU6050-滤波算法演示.mp4 [121.4 MB]
15-无人机-遥控端-校准手慢点.mp4 [76.6 MB]
01-无人机-飞控系统-PID-基础理论回顾.mp4 [91.2 MB]
12-无人机-飞控系统-MPU6050-常用滤波算法介绍.mp4 [97.6 MB]
07-无人机-飞控系统-MPU6050-读取6轴数据.mp4 [62.2 MB]
水平方向加速度计.png [114.0 KB]
13-无人机-飞控系统-MPU6050-滤波算法移植.mp4 [49.0 MB]
垂直方向加速度计.png [25.8 KB]
03-无人机-飞控系统-MPU6050-内部结构&通信接口.mp4 [71.2 MB]
📁 day_03
10-无人机-遥控项目-遥控数据处理-按键数据处理.mp4 [95.5 MB]
05-无人机-遥控项目-遥控数据处理-摇杆扫描-测试.mp4 [168.7 MB]
01-无人机-遥控项目-遥控数据处理-思路分析.mp4 [15.7 MB]
02-无人机-遥控项目-遥控数据处理-按键扫描.mp4 [138.7 MB]
03-无人机-遥控项目-遥控数据处理-摇杆扫描-ADC配置.mp4 [100.0 MB]
13-无人机-遥控项目-通讯任务-关机和定高信号处理.mp4 [38.8 MB]
14-无人机-无线通讯-SPI通讯-临界区说明.mp4 [44.7 MB]
06-无人机-遥控项目-遥控数据处理-摇杆扫描-Vofa工具说明.mp4 [102.7 MB]
11-无人机-遥控项目-通讯任务-发送数据.mp4 [74.2 MB]
07-无人机-遥控项目-遥控数据处理-摇杆扫描-极性和范围.mp4 [80.9 MB]
09-无人机-遥控项目-遥控数据处理-摇杆扫描-偏移问题解决.mp4 [216.8 MB]
12-无人机-飞控项目-通讯任务-接收数据.mp4 [135.3 MB]
📁 day_04
02-四轴飞行器-飞控端-通讯任务-无线通讯不稳定问题说明.mp4 [88.0 MB]
03-四轴飞行器-飞控端-通讯任务-处理遥控连接状态.mp4 [264.2 MB]
07-四轴飞行器-飞控端-通讯任务-处理飞行状态-油门解锁状态机-思路分析.mp4 [29.3 MB]
09-四轴飞行器-油门别给太大.mp4 [45.1 MB]
15-四轴飞行器-遥控端-显示任务-驱动说明.mp4 [120.4 MB]
代码补充.txt [179.0 B]
05-四轴飞行器-飞控端-通讯任务-处理飞行状态-状态机说明.mp4 [22.5 MB]
飞行状态机.png [20.5 KB]
12-四轴飞行器-飞控端-飞控任务-根据状态设置电机转速-上.mp4 [79.6 MB]
01-四轴飞行器-飞控端-通讯任务-数据处理思路.mp4 [18.2 MB]
11-四轴飞行器-飞控端-飞控任务-整体思路.mp4 [15.3 MB]
10-四轴飞行器-飞控端-通讯任务-处理飞行状态-油门解锁状态机编程.mp4 [216.3 MB]
油门解锁状态机.png [47.0 KB]
08-四轴飞行器-遥控端-通讯任务-发送数据-关机&定高安全问题.mp4 [28.4 MB]
06-四轴飞行器-飞控端-通讯任务-处理飞行状态-状态机编程.mp4 [85.9 MB]
📁 day_07
11-无人机项目梳理.mp4 [45.5 MB]
08-无人机-定高-VL53L1X-高度PID计算逻辑-下.mp4 [89.7 MB]
10-FreeROTS回顾.mp4 [117.1 MB]
09-无人机-定高-VL53L1X-记录当前高度.mp4 [80.1 MB]
01-无人机-定高-思路分析.mp4 [202.2 MB]
07-无人机-定高-VL53L1X-高度PID计算逻辑-上.mp4 [69.6 MB]
05-无人机-定高-VL53L1X-驱动说明.mp4 [87.7 MB]
03-无人机-定高-VL53L1X-外设配置.mp4 [35.0 MB]
02-无人机-定高-芯片介绍.mp4 [31.0 MB]
06-无人机-定高-VL53L1X-驱动编写.mp4 [215.3 MB]
04-无人机-定高-VL53L1X-驱动适配.mp4 [91.4 MB]
📁 day_06
11-无人机-飞控任务-PID调参-俯仰角-内环-P-确定极性.mp4 [137.7 MB]
10-无人机-飞控任务-姿态控制-思路梳理.mp4 [11.2 MB]
14-无人机-飞控任务-PID调参-俯仰角-外环-P-确定大小.mp4 [118.9 MB]
06-无人机-飞控任务-PID-计算逻辑编码.mp4 [54.5 MB]
04-无人机-飞控任务-姿态PID-姿态解算概述.mp4 [175.9 MB]
03-无人机-飞控任务-姿态PID-控制思路.mp4 [36.9 MB]
01-无人机-飞控任务-姿态控制-思路分析.mp4 [14.9 MB]
08-无人机-飞控任务-PID-计算结果作用到电机转速-思路分析.mp4 [285.1 MB]
17-无人机-飞控任务-PID调参-偏航角.mp4 [536.7 MB]
07-无人机-飞控任务-PID-串级PID代码编写.mp4 [60.9 MB]
12-无人机-飞控任务-PID调参-俯仰角-内环-P-确定大小.mp4 [118.9 MB]
09-无人机-飞控任务-PID-计算结果作用到电机转速-代码编写.mp4 [62.3 MB]
15-无人机-飞控任务-PID调参-俯仰角-外环P增大&内环D调整.mp4 [142.8 MB]
📁 10_嵌入式技术之水质水位监测
📁 04视频
📁 Day03
01_永久化保存常量参数.mp4 [280.3 MB]
03_水位测量总结.mp4 [108.8 MB]
07_水质测量ADC模块初始化.mp4 [148.7 MB]
06_I2C使用函数编写.mp4 [90.6 MB]
2024-11-30 15-34-22.mp4 [31.3 MB]
08_完成ADS1115的测试.mp4 [124.1 MB]
04_I2C回顾.mp4 [132.1 MB]
05_I2C的初始化.mp4 [65.7 MB]
02_水位测量永久化保存数据优化.mp4 [165.6 MB]
09_完成最终的水质监测.mp4 [140.6 MB]
📁 Day02
10_测试SPI驱动读取设备ID.mp4 [58.8 MB]
10_水质水位.txt [526.0 B]
03_实现水位测量的驱动编写.mp4 [216.9 MB]
11_FLASH写入数据的代码.mp4 [62.9 MB]
13_完成FLASH的读写操作.mp4 [24.1 MB]
06_完成水位测量.mp4 [84.7 MB]
08_SPI初始化.mp4 [57.2 MB]
05_完成水位校验.mp4 [212.9 MB]
12_FLASH的擦除和读数据代码.mp4 [32.3 MB]
09_SPI的驱动实现.mp4 [23.1 MB]
01_每日一考.mp4 [19.5 MB]
02_水位测量的基本架构.mp4 [122.9 MB]
07_SPI回顾.mp4 [88.8 MB]
04_水位测量的校验逻辑.mp4 [27.5 MB]
📁 Day01
11_debug调试模块的最终实现.mp4 [65.6 MB]
07_项目最终效果演示.mp4 [377.7 MB]
01_水质水位监测项目介绍.mp4 [334.3 MB]
12_展示模块.mp4 [308.1 MB]
02_硬件连接介绍.mp4 [334.4 MB]
10_拼接字符串完成复杂定义.mp4 [11.7 MB]
08_串口打印实现.mp4 [107.4 MB]
04_压力传感器读取数据时序图.mp4 [23.6 MB]
05_TDS监测硬件介绍.mp4 [370.8 MB]
06_ADC转换模块介绍.mp4 [50.5 MB]
09_使用条件定义做debug开关.mp4 [43.7 MB]
03_水位监测演示.mp4 [590.2 MB]
📁 02.资料
📁 03_水位测量
模块手册.pdf [260.9 KB]
📁 01_ADC 模块
ads1115.pdf [950.2 KB]
adafruit-4-channel-adc-breakouts.pdf [690.5 KB]
📁 02_TDS 传感器
模拟TDS传感器模块用户手册.pdf [1.2 MB]
📁 01.笔记
尚硅谷嵌入式项目之水质水位监测（寄存器版本） 1.0.0.docx [7.8 MB]
尚硅谷嵌入式项目之水质水位监测（HAL库版本） 1.0.0.docx [14.4 MB]
03.代码.zip [25.0 MB]
📁 12_嵌入式技术之畜牧牛羊定位
📁 02_资料
📁 03_gps模块
AT6558R.pdf [1.1 MB]
接收机协议规范.pdf [971.4 KB]
📁 05_计步器
ds3553.pdf [411.5 KB]
📁 01_cjson
📁 cJSON-master
📁 cJSON-master
📁 tests
📁 json-patch-tests
README.md [2.3 KB]
package.json [393.0 B]
tests.json [16.8 KB]
cjson-utils-tests.json [2.6 KB]
spec_tests.json [3.9 KB]
📁 inputs
test1.expected [474.0 B]
test8.expected [228.0 B]
test4 [3.4 KB]
test10 [79.0 B]
test11.expected [147.0 B]
test2 [242.0 B]
test5 [873.0 B]
test7.expected [347.0 B]
test10.expected [78.0 B]
test3 [603.0 B]
test9 [50.0 B]
📁 unity
📁 docs
UnityAssertionsCheatSheetSuitableforPrintingandPossiblyFraming.pdf [141.1 KB]
UnityConfigurationGuide.md [17.7 KB]
UnityGettingStartedGuide.md [8.1 KB]
UnityAssertionsReference.md [27.9 KB]
ThrowTheSwitchCodingStandard.md [7.9 KB]
UnityHelperScriptsGuide.md [9.1 KB]
📁 src
unity.c [48.3 KB]
unity.h [64.9 KB]
unity_internals.h [67.9 KB]
📁 test
📁 targets
iar_arm_v5.yml [1.8 KB]
iar_arm_v4.yml [2.0 KB]
iar_sh2a_v6.yml [2.0 KB]
hitech_picc18.yml [2.9 KB]
gcc_64.yml [942.0 B]
gcc_auto_limits.yml [856.0 B]
📁 tests
testunity.c [120.7 KB]
test_generate_test_runner.rb [46.3 KB]
testparameterized.c [3.4 KB]
📁 expectdata
testsample_mock_param.c [1.6 KB]
testsample_mock_new2.c [1.7 KB]
testsample_mock_head1.c [1.5 KB]
testsample_mock_new1.c [1.8 KB]
testsample_head1.c [1.2 KB]
testsample_mock_cmd.c [1.6 KB]
testsample_mock_def.c [1.5 KB]
testsample_param.c [1.4 KB]
testsample_head1.h [333.0 B]
testsample_mock_head1.h [267.0 B]
testsample_mock_yaml.c [1.8 KB]
testsample_def.c [1.2 KB]
testsample_yaml.c [1.5 KB]
📁 spec
generate_module_existing_file_spec.rb [4.3 KB]
📁 testdata
cmock.h [452.0 B]
testRunnerGeneratorSmall.c [1.3 KB]
mockMock.h [291.0 B]
CException.h [221.0 B]
testRunnerGeneratorWithMocks.c [5.7 KB]
Defs.h [96.0 B]
rakefile_helper.rb [8.8 KB]
Makefile [2.6 KB]
rakefile [3.0 KB]
📁 extras
📁 fixture
📁 src
unity_fixture.h [3.3 KB]
unity_fixture.c [10.1 KB]
unity_fixture_malloc_overrides.h [1.8 KB]
📁 test
📁 main
…（层级过深，已停止）
unity_output_Spy.h [628.0 B]
template_fixture_tests.c [722.0 B]
unity_output_Spy.c [1.2 KB]
unity_fixture_TestRunner.c [2.5 KB]
Makefile [2.3 KB]
rakefile_helper.rb [6.5 KB]
readme.txt [515.0 B]
📁 eclipse
error_parsers.txt [1.1 KB]
📁 examples
📁 example_2
📁 src
📁 test
📁 test_runners
…（层级过深，已停止）
TestProductionCode.c [2.4 KB]
readme.txt [175.0 B]
📁 example_3
📁 test
TestProductionCode.c [2.3 KB]
TestProductionCode2.c [565.0 B]
📁 helper
UnityHelper.h [483.0 B]
📁 src
rakefile_helper.rb [8.2 KB]
readme.txt [696.0 B]
target_gcc_32.yml [852.0 B]
📁 example_1
📁 test
📁 test_runners
…（层级过深，已停止）
TestProductionCode.c [2.3 KB]
📁 src
ProductionCode.c [862.0 B]
ProductionCode.h [96.0 B]
unity_config.h [12.0 KB]
📁 release
build.info [5.0 B]
📁 auto
unity_to_junit.py [5.8 KB]
parse_output.rb [6.8 KB]
colour_prompt.rb [3.4 KB]
generate_module.rb [10.8 KB]
generate_config.yml [1.2 KB]
unity_test_summary.rb [4.0 KB]
generate_test_runner.rb [17.7 KB]
print_value.c [3.1 KB]
readme_examples.c [6.7 KB]
parse_hex4.c [3.4 KB]
cjson_add.c [12.5 KB]
parse_value.c [3.2 KB]
json_patch_tests.c [6.6 KB]
old_utils_tests.c [7.6 KB]
print_number.c [4.3 KB]
parse_array.c [4.9 KB]
unity_setup.c [121.0 B]
compare_tests.c [8.4 KB]
parse_object.c [5.4 KB]
misc_tests.c [29.1 KB]
print_string.c [2.8 KB]
CMakeLists.txt [4.5 KB]
parse_examples.c [8.5 KB]
misc_utils_tests.c [3.3 KB]
print_object.c [4.1 KB]
parse_number.c [3.8 KB]
📁 fuzzing
📁 inputs
test4 [3.4 KB]
test2 [244.0 B]
test3.uu [603.0 B]
test3 [603.0 B]
test3.uf [603.0 B]
test11 [151.0 B]
test3.bu [603.0 B]
CMakeLists.txt [1.1 KB]
cjson_read_fuzzer.c [1.7 KB]
afl.sh [192.0 B]
json.dict [914.0 B]
fuzz_main.c [992.0 B]
ossfuzz.sh [529.0 B]
afl-prepare-linux.sh [153.0 B]
afl.c [4.1 KB]
📁 library_config
cJSONConfig.cmake.in [802.0 B]
libcjson_utils.pc.in [351.0 B]
cJSONConfigVersion.cmake.in [379.0 B]
CONTRIBUTORS.md [3.9 KB]
CMakeLists.txt [10.0 KB]
SECURITY.md [713.0 B]
CHANGELOG.md [24.9 KB]
Makefile [4.5 KB]
README.md [27.0 KB]
LICENSE [1.1 KB]
cJSON_Utils.h [3.8 KB]
cJSON.c [77.0 KB]
cJSON.h [15.8 KB]
valgrind.supp [61.0 B]
cJSON-master.zip [450.0 KB]
📁 02_稳压器
C347385_线性稳压器(LDO)_XC6219B302MR_规格书_WJ1122392.PDF [2.5 MB]
📁 06_原理图
定位器NB_IOT版_2024-06-03.pdf [1.6 MB]
📁 04_NB-IoT
QS-100硬件设计手册v1.1.pdf [1.5 MB]
QS-100模组规格书.pdf [1.4 MB]
QS-100模块AT命令手册_V1.0.pdf [2.6 MB]
📁 04_视频
📁 day03
03_GPS芯片参数配置.mp4 [108.1 MB]
05_LoRa驱动移植.mp4 [85.3 MB]
04_GPS芯片稳定读取到数据.mp4 [96.9 MB]
07_计步器芯片完成寄存器读操作.mp4 [60.4 MB]
09_计步器实际效果演示.mp4 [113.7 MB]
01_使用IOT芯片发送长字符串.mp4 [103.8 MB]
08_修改计步器的配置.mp4 [64.8 MB]
06_计步器芯片DS3553介绍.mp4 [205.1 MB]
02_GPS芯片驱动准备.mp4 [39.4 MB]
📁 day01
09_debug调试模块.mp4 [74.3 MB]
06_项目演示.mp4 [103.9 MB]
02_定位器硬件架构.mp4 [1.1 GB]
03_GPS模块芯片介绍.mp4 [101.7 MB]
04_NB_IOT芯片介绍.mp4 [162.6 MB]
11_对时间进行转换的函数.mp4 [88.8 MB]
01_畜牧定位器简介.mp4 [156.8 MB]
08_项目结构配置.mp4 [76.1 MB]
07_背景原理介绍.mp4 [152.7 MB]
05_计步器模块介绍.mp4 [99.7 MB]
12_公共配置文件介绍.mp4 [29.1 MB]
10_延时函数测试使用.mp4 [49.6 MB]
📁 day04
06_完成定位器低功耗.mp4 [411.9 MB]
09_以太网驱动移植.mp4 [74.7 MB]
04_完成APP通讯层逻辑.mp4 [96.2 MB]
08_完成LoRa移植.mp4 [43.6 MB]
01_应用层GPS信息采集.mp4 [87.4 MB]
07_网关初始化.mp4 [54.3 MB]
02_应用层GPS信息处理.mp4 [166.7 MB]
03_完成GPS信息采集.mp4 [54.8 MB]
10_网关实现.mp4 [55.6 MB]
11_项目总结.mp4 [92.7 MB]
05_GPS定位信息对应地图信息.mp4 [46.2 MB]
📁 day02
08_芯片远程发送数据到云服务器.mp4 [147.3 MB]
06_芯片创建客户端.mp4 [80.5 MB]
03_芯片交互接收消息改进方案1.mp4 [131.3 MB]
09_使用完客户端之后关闭.mp4 [30.3 MB]
02_和芯片QS100交互的方式.mp4 [204.1 MB]
畜牧定位器结构.drawio [6.6 KB]
05_芯片连接外网.mp4 [61.9 MB]
10_IOT物联网连接云服务演示.mp4 [140.9 MB]
07_芯片连接远程服务端.mp4 [45.3 MB]
01_回顾架构.mp4 [35.1 MB]
04_芯片交互接收消息最终方案.mp4 [68.4 MB]
📁 01_笔记
尚硅谷嵌入式项目之畜牧定位器1.0.1.docx [14.1 MB]
畜牧定位器开发流程图.drawio [8.8 KB]
畜牧定位器结构.drawio [6.6 KB]
03_代码.zip [80.9 MB]
📁 00_就业资料包
📁 项目模板
项目模板资料.zip [1.8 MB]
项目模板1 (1).png [35.5 KB]
项目模板1 (2).png [29.7 KB]
📁 简历模板
简历模板-051.docx [384.0 KB]
简历模版-010.doc [100.6 KB]
简历模版-002.doc [30.0 KB]
简历模版-036.doc [38.0 KB]
简历模版-039.doc [156.0 KB]
简历模板-067.doc [46.0 KB]
简历模版-009.doc [30.5 KB]
简历模版-030.doc [26.5 KB]
简历模板-058.doc [106.5 KB]
简历模版-007.docx [151.6 KB]
简历模版-016.doc [162.0 KB]
简历模版-027.docx [25.9 KB]
简历模板-063.doc [51.0 KB]
简历模版-011.doc [50.5 KB]
简历模版-040.docx [79.2 KB]
简历模版-004.doc [3.0 MB]
简历模板-066.doc [43.0 KB]
简历模版-028.doc [17.5 KB]
简历模版-003.doc [175.6 KB]
简历模版-008.docx [19.7 KB]
简历模版-022.doc [21.5 KB]
简历模版-020.doc [246.5 KB]
简历模版-012.doc [886.5 KB]
简历模版-034.docx [127.9 KB]
简历模版-019.doc [166.5 KB]
简历模版-026.doc [123.5 KB]
简历模板-042.doc [49.0 KB]
简历模版-024.docx [24.1 KB]
简历模版-029.docx [141.3 KB]
简历模版-025.docx [23.7 KB]
简历模版-005.doc [29.9 KB]
简历模板-057.docx [36.5 KB]
简历模板-062.docx [51.3 KB]
简历模版-006.doc [131.7 KB]
简历模版-014.doc [126.0 KB]
简历模版-013.doc [35.0 KB]
简历模板-050.doc [246.5 KB]
简历模板-046.docx [177.8 KB]
简历模版-021.docx [40.6 KB]
简历模版-017.doc [206.7 KB]
简历模版-033.doc [118.0 KB]
简历模板-049.docx [97.9 KB]
📁 网页版简历模板
前端BOSS直聘-2.pdf [440.0 KB]
大数据BOSS直聘.pdf [420.3 KB]
JavaBOSS直聘-1.pdf [382.9 KB]
大数据BOSS直聘-3.pdf [422.9 KB]
大数据BOSS直聘-2.pdf [442.3 KB]
JavaBOSS直聘-4.pdf [467.4 KB]
前端BOSS直聘-3.pdf [404.0 KB]
前端BOSS直聘-1.pdf [417.4 KB]
JavaBOSS直聘-2.pdf [426.8 KB]
大数据BOSS直聘-4.pdf [433.9 KB]
IT互联网行业&研发术语.docx [27.9 KB]
BOSS话术.docx [12.7 KB]
上课软件.zip [62.3 MB]
面试真题.docx [406.2 KB]
如何编写简历1.0.0.docx [3.9 MB]
📁 21_嵌入式技术之LVGL
📁 01_笔记
尚硅谷嵌入式技术之触摸屏LVGL V1.0.0.docx [9.4 MB]
📁 04_视频
15_播放动画.mp4 [70.0 MB]
04_lvgl的移植_3.mp4 [75.8 MB]
14_给对象添加动画.mp4 [150.5 MB]
09_显示bug_内存不足.mp4 [30.9 MB]
03_lvgl的移植_2.mp4 [31.5 MB]
10_显示进度条.mp4 [81.8 MB]
01_LVGL的介绍.mp4 [95.7 MB]
12_按键矩阵.mp4 [145.5 MB]
08_显示一个标签_2.mp4 [55.1 MB]
11_创建按钮.mp4 [49.9 MB]
05_移植的验证是否成功.mp4 [70.1 MB]
13_给对象添加事件.mp4 [88.0 MB]
07_显示一个标签_1.mp4 [162.7 MB]
16_显示中文.mp4 [145.0 MB]
06_基本概念.mp4 [84.1 MB]
02_lvgl的移植_1.mp4 [239.4 MB]
📁 02_资料
📁 02_参考工程
lvgl_register.zip [1.7 MB]
📁 03_批量添加c到project的脚本
add_c_to_project.bat [2.8 KB]
📁 01_lvgl源码
lvgl-8.4.0.zip [25.6 MB]
📁 17_嵌入式技术之版本控制
📁 4.视频
09_尚硅谷-Git（实战操作 分支合并）.mp4 [11.5 MB]
18_尚硅谷-SVN（服务器部署）.mp4 [45.5 MB]
13_尚硅谷-Git（Gitee实战操作 协作开发 代码冲突）.mp4 [28.7 MB]
12_尚硅谷-Git（Gitee实战操作 协作开发）.mp4 [93.4 MB]
15_尚硅谷-Git（Gitee实战操作 VSCode界面化操作）.mp4 [55.9 MB]
10_尚硅谷-Git（实战操作 分支冲突）.mp4 [27.1 MB]
07_尚硅谷-Git（实战操作 版本穿梭）.mp4 [71.7 MB]
01_尚硅谷-Git（简介）.mp4 [65.6 MB]
05_尚硅谷-Git（实战操作 第一次完整提交）.mp4 [46.2 MB]
08_尚硅谷-Git（实战操作 创建&切换分支）.mp4 [40.6 MB]
16_尚硅谷-Git（Gitee实战操作 Linux版本）.mp4 [80.5 MB]
11_尚硅谷-Git（实战操作 上传代码到码云）.mp4 [39.4 MB]
04_尚硅谷-Git（实战操作 配置签名）.mp4 [35.0 MB]
17_尚硅谷-Git（Gitee实战操作 其他操作）.mp4 [54.4 MB]
02_尚硅谷-Git（集中式&分布式区别）.mp4 [33.3 MB]
06_尚硅谷-Git（实战操作 多次完整提交）.mp4 [28.5 MB]
19_尚硅谷-SVN（客户端使用）.mp4 [51.2 MB]
14_尚硅谷-Git（Gitee实战操作 协作开发 第三方作者）.mp4 [146.7 MB]
03_尚硅谷-Git（Git下载与安装）.mp4 [17.7 MB]
📁 2.资料
TortoiseSVN-1.14.6.29673-x64-svn-1.14.3.msi [29.7 MB]
VisualSVN-Server-5.3.3-x64.msi [12.9 MB]
Git-2.43.0-64-bit.exe [58.0 MB]
📁 1.笔记
尚硅谷嵌入式技术之版本控制 2.0.0.docx [13.3 MB]
尚硅谷嵌入式技术之Git.docx [24.8 MB]
📁 02_嵌入式技术之数据结构和算法
📁 2.资料
数据结构与算法分析：C语言描述（第2版）.pdf [38.9 MB]
📁 1.笔记
📁 数据结构流程图分析
📁 算法流程图分析
02-binary-search.drawio [10.5 KB]
04-quick-sort.drawio [20.4 KB]
03-bubble-sort.drawio [28.5 KB]
📁 数据结构流程图分析
04-Queue.drawio [16.2 KB]
02-linked-list.drawio [29.6 KB]
03-Static.drawio [4.5 KB]
01-DynamicArray.drawio [7.9 KB]
.$01-DynamicArray.drawio.bkp [7.9 KB]
嵌入式之数据结构和算法-课堂笔记.md [7.7 KB]
尚硅谷嵌入式技术之数据结构与算法1.6.0.docx [9.8 MB]
📁 02Code
📁 Chapter02-algorithm
03-bubble-sort.c [2.0 KB]
02-binary-search.c [1.3 KB]
01-sequence-search.c [910.0 B]
04-quick-sort.c [3.2 KB]
01-sequence-search.exe [78.0 KB]
05-quick-sort2.c [3.0 KB]
📁 Chapter01-datastruct
02-linked-lists.c [8.6 KB]
01-dynamic-array.c [5.5 KB]
03-stack.c [3.4 KB]
02-linked-list.c [4.8 KB]
04-queue.c [3.6 KB]
📁 .vscode
tasks.json [835.0 B]
launch.json [1.0 KB]
settings.json [382.0 B]
demo.exe [78.0 KB]
demo.c [890.0 B]
📁 4.视频
📁 Day01
07-链表概述和实现思路.wmv [23.4 MB]
02-数组的特点和动态数组实现思路.wmv [13.2 MB]
01-数据结构概述.wmv [63.5 MB]
10-链表实现-添加节点-代码.wmv [63.3 MB]
13-链表实现-修改和获取指定位置节点的数据值.wmv [21.1 MB]
11-链表实现-删除节点.wmv [41.0 MB]
09-链表实现-添加节点-思路分析.wmv [17.8 MB]
06-动态数组实现-删除元素.wmv [33.1 MB]
04-动态数组实现-初始化、销毁和调整内存.wmv [36.1 MB]
12-链表实现-释放所有节点的内存空间.wmv [13.4 MB]
08-链表实现-结构体设计和链表初始化.wmv [36.5 MB]
03-动态数组实现-结构体设计.wmv [22.1 MB]
05-动态数组实现-添加新元素.wmv [66.8 MB]
📁 Day02
03-数据结构-栈-代码实现-初始化和释放.wmv [24.8 MB]
06-数据结构-队列-代码实现-初始化和释放.wmv [20.8 MB]
15-排序算法-快速排序-代码实现.wmv [74.3 MB]
07-数据结构-队列-入队思路分析和代码实现.wmv [31.3 MB]
04-数据结构-栈-代码实现-进栈和出栈.wmv [22.0 MB]
16-排序算法-快速排序-代码优化.wmv [9.1 MB]
09-算法评价标准-时间复杂度.wmv [48.1 MB]
02-数据结构-栈-特点和思路分析.wmv [31.8 MB]
10-算法评价标准-空间复杂度.wmv [7.8 MB]
05-数据结构-队列-特点和思路分析.wmv [22.0 MB]
08-数据结构-队列-出队思路分析和代码实现.wmv [34.7 MB]
11-查找算法-顺序查找.wmv [11.7 MB]
12-查找算法-二分查找.wmv [29.5 MB]
01-每日一考讲解.wmv [17.2 MB]
14-排序算法-快速排序-思路分析.wmv [36.2 MB]
13-排序算法-冒泡排序.wmv [47.3 MB]
📁 13_嵌入式技术之FreeRTOS实时操作系统
📁 04_视频
📁 day05
06_低功耗模式源码解析.mp4 [108.1 MB]
04_软件定时器的及时控制.mp4 [254.0 MB]
02_软件定时器介绍.mp4 [63.5 MB]
03_软件定时器的使用.mp4 [231.2 MB]
09_查看剩余内存方法.mp4 [141.9 MB]
08_内存管理方案总结.mp4 [83.7 MB]
01_每日一考.mp4 [14.2 MB]
05_低功耗模式介绍.mp4 [46.1 MB]
07_内存管理方案HEAP1.mp4 [129.3 MB]
10_总结freeRTOS.mp4 [108.7 MB]
📁 day04
01_每日一考.mp4 [20.5 MB]
11_任务通知替代事件通知组.mp4 [107.6 MB]
09_任务通知介绍.mp4 [34.6 MB]
08_事件标志组演示.mp4 [294.6 MB]
03_单个队列的使用方法.mp4 [86.1 MB]
06_队列集的底层实现.mp4 [23.4 MB]
02_多个队列的使用方法.mp4 [30.1 MB]
04_使用串口队列接收串口数据点亮LED灯.mp4 [175.9 MB]
05_队列集统一管理队列操作.mp4 [127.2 MB]
10_使用任务通知替代二值信号量.mp4 [85.1 MB]
07_事件标志组介绍.mp4 [203.6 MB]
📁 day01
05_完成freeRTOS的移植.mp4 [162.1 MB]
10_freeRTOS总结.mp4 [28.4 MB]
04_准备项目模板.mp4 [149.8 MB]
08_使用freeRTOS和裸机开发的区别.mp4 [247.2 MB]
03_freeRTOS切换任务机制.mp4 [28.6 MB]
06_使用freeRTOS的软件结构.mp4 [38.9 MB]
02_freeRTOS调度机制.mp4 [45.0 MB]
01_freeRTOS简介.mp4 [151.5 MB]
07_使用freeRTOS创建第一个任务.mp4 [144.8 MB]
09_不同优先级和相同优先级的任务调度.mp4 [231.5 MB]
📁 day02
01_每日一考.mp4 [15.0 MB]
05_添加临界区构建原子化操作.mp4 [171.3 MB]
04_任务的挂起和恢复.mp4 [95.1 MB]
02_静态创建task任务.mp4 [153.5 MB]
13_获取任务的状态结构体.mp4 [107.4 MB]
11_获取任务状态和最小剩余空间.mp4 [235.1 MB]
06_内容总结.mp4 [38.7 MB]
09_获取任务数量.mp4 [95.5 MB]
12_获取任务运行时间函数演示.mp4 [148.3 MB]
03_删除任务使用演示.mp4 [242.9 MB]
10_获取任务句柄.mp4 [55.5 MB]
07_挂起调度器和进入临界区的区别.mp4 [275.7 MB]
08_查看和设置优先级.mp4 [195.0 MB]
📁 day03
10_使用相同串口的资源争抢.mp4 [45.3 MB]
11_使用二值信号量管理串口资源互斥.mp4 [44.5 MB]
06_队列存放复杂结构.mp4 [58.9 MB]
02_延时函数选择使用.mp4 [169.3 MB]
01_每日一考.mp4 [11.5 MB]
04_使用轮询完成数据交互.mp4 [55.1 MB]
09_使用信号量实现最小占用CPU的串口接收.mp4 [135.1 MB]
03_消息队列介绍.mp4 [52.1 MB]
13_计数型信号量实现按3次led闪烁.mp4 [188.7 MB]
12_使用互斥信号量解决优先级翻转问题.mp4 [190.3 MB]
07_信号量介绍.mp4 [42.1 MB]
08_使用轮询接收串口数据会大量占用CPU.mp4 [52.6 MB]
05_使用队列完成数据读写.mp4 [118.9 MB]
📁 02_资料
📁 03_软件安装包
Xmind-for-Windows-x64bit-24.10.01101-202410202317.exe [157.8 MB]
SetupSTM32CubeMX-6.12.1-Win.exe [584.7 MB]
📁 02_初始案例代码
Initial.zip [7.7 MB]
01_官方源码.zip [96.4 MB]
📁 01_笔记
FreeRTOS.xmind [2.3 MB]
Mastering-the-FreeRTOS-Real-Time-Kernel.v1.0.pdf [8.1 MB]
尚硅谷嵌入式技术之FreeRTOS实时操作系统 2.0.1.docx [37.5 MB]
03_代码.zip [211.4 MB]适合人群
- 嵌入式技术初学者
- 希望提升嵌入式技能的开发者
学习收获
掌握Linux操作系统
精通STM32单片机编程
构建嵌入式全栈知识体系
祝您学习愉快！
学有所成，前程似锦！
